Tender For Repair Of School Building In Sahara Tola Midle School, Bodowa,Construction Of Boundary Wall, Toilet, Drinking Water And Nutrition Garden.
Tender Value
23.93 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
2 days left
EMD
47900
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Godda → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of School Building In Sahara Tola Midle School, Bodowa,Construction Of Boundary Wall, Toilet, Drinking Water And Nutrition Garden.
BOQ
| Sl. No. | Item Description |
| 1 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.43 |
| 2 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.21 |
| 3 | Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mmB.C.D. S.O.R. Item No. 5.12.3 |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) 5.3.9.1 |
| 5 | Providing Tor steel reinforcement of 10mm.,12mm &16mm.dia bars as per approved design and drawing -do--do- TMT Fe 500 (Only valid for SAIL & TATA Steel, JSPL, Electro steel Ltd. And Vizal Steel). (a)10 mm |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes D.S.R 18.8.1 |
| 7 | Polyethylene water storage tank mark (e.g sintex/sinter/himgiri/gangotri etc) with cover and suitable locking arrangement.DWSR M079, Pge-31 |
| 8 | Pillar cock (ISI marked) |
| 9 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I.B.C.D. S.O.R. Item No. 5.1.1 + 5.1.2 |
| 10 | Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.1.7 |
| 11 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.1.10 |
| 12 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.6.3 |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.2 |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.1 |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).B.C.D. S.O.R. Item No. 5.3.10 |
| 16 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.9.1 |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.B.C.D. S.O.R. Item No. 5.3.17.1 |
| 18 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.B.C.D. S.O.R. Item No. 5.2.14 |
| 19 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).B.C.D. S.O.R. Item No. 5.3.11 |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.B.C.D. S.O.R. Item No. 5.3.17.6 |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.B.C.D. S.O.R. Item No. 5.3.17.5 |
| 22 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 23 | Providing TMT steel reinforcement as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.5.4 : 8mm dia Bar - |
| 24 | B.C.D. S.O.R. Item No. 5.5.5 (a) : 10mm dia Bar - |
| 25 | B.C.D. S.O.R. Item No. 5.5.5 (b) : 12mm & above dia Bar - |
| 26 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.24 |
| 27 | Supply of Angle (size in mm) - (i) 50mm x 50mm x 6mmB.C.D. S.O.R. Item No. M-195 (b) (i) |
| 28 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.28 |
| 29 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre.D.S.R. Item No. 16.53 |
| 30 | Supplying, fitting and fixing 20 guage G.C.I. sheet gate fitted on M.S. angle frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.30 |
| 31 | Providing two coat of painting with ready mixed paint over primer one coat of red lead paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.41 + 5.8.43 |
| 32 | Cement |
| 33 | Stone chips |
| 34 | Steel |
| 35 | Brick |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.D.S.R. 18.9.4 |
| 37 | Supplying fitting and fixing of approved make 1.50 HP Submersible pump set having head of 135 metre including all taxes, royalty, etc.all complete job as per direction of E/I.(M1055 : DW&S) |
| 38 | Supplying fitting and fixing of 5 H.P. standard make starter panel board with arrangement of all necessary protection including all taxes,royalty etc all comlete job as per direction of E/I.(M1065 : DW&S) |
| 39 | Supplying fitting and fixing 3 core 4mm2 flat copper submersible cable approved make including all taxes,royalty etc all complete job as per direction of E/I.(M1906 : Energy) |
| 40 | Wiring for light/Power plug with 2 x 4 Sqmm. FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 no 4 Sqmm, FRPVC insulated copper conductor single core cable for loop earthing as required. |
| 41 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 Amp. One Way Switch |
| 42 | 3 pin 5/6 Amp. Socket Outlet |
| 43 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 44 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 45 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 46 | Supplying and fixing 2 pin, 5 amp ceiling rose on the existing junction box/wooden block including connection etc. as required. |
| 47 | Supplying and fixing brass batten/angle holder including connection etc. as required. |
| 48 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 49 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep |
| 50 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 Way, Single Door |
| 51 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, \\"B\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.6/32 amps, Single Pole, \\"B\\" Series |
| 52 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amp |
| 53 | 63 amp |
| 54 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 55 | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. |
| 56 | Supplying and fixing 9/10 watt LED bulb of Bajaj, Phillips or equivalent make as required. |
| 57 | S.I.T.C. of following rating surface mounted LED tube light fittings suitable for 230 V, 50 Hz, single phase supply etc.complete as required.20/22 watt LED Tubelight |
| 58 | Supplying and fixing single arm - 1 m long for steet lighting fixture as required. |
| 59 | S.I.T.C. of following rating LED street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270 V AC, 50 Hz. Luminarie shall be confirm to IS-10322/Part-5/Section-3 and shall be complete with all accessories as required.45/48 Watt LED Street Light |
| 60 | S.I.T.C. of following size ceiling fan 3 blades confirming to IS:374/2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper wire suitable for 230 V, 50 Hz, single phase supply etc. complete as required.1200mm (48\\") Ceiling Fan |
| 61 | 25 sq.mm,3.5 core Electrical service cable used for connect Main electrical poll to IB/SE office main switch board all complete Rs 280.00/M add for 10 % |
| 62 | Erection of C.C.Pole upto 11m in BB erection of RCC/PCC Pole of following length in brick ballast and ramming the foundation finishing with 150mm thik CC (1:3:6) layer on top with including execuvation and fitting etc as required. |
| 63 | GST @ 18% |
| 64 | Labour cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender