Tender For Repair Of School Building In Angabali Midle School, Construction Of Boundary Wall, Toilet, Drinking Water And Nutrition Garden.
Tender Value
24.19 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
0 days left
EMD
48400
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Godda → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of School Building In Angabali Midle School, Construction Of Boundary Wall, Toilet, Drinking Water And Nutrition Garden.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.B.C.D. S.O.R. Item No. 5.10.7 |
| 2 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.7.6 |
| 3 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 4 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.43 |
| 5 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.21 |
| 6 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge.75mm average thicknessD.S.R. Item No. 26.28.3 |
| 7 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameterD.S.R. Item No. 26.29.1 |
| 8 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer.D.S.R. Item No. 26.31.1 |
| 9 | Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mmB.C.D. S.O.R. Item No. 5.12.3 |
| 10 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I.B.C.D. S.O.R. Item No. 5.1.1 + 5.1.2 |
| 11 | Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.1.7 |
| 12 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.1.10 |
| 13 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.6.3 |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.2 |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.1 |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).B.C.D. S.O.R. Item No. 5.3.10 |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.9.1 |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.B.C.D. S.O.R. Item No. 5.3.17.1 |
| 19 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.B.C.D. S.O.R. Item No. 5.2.14 |
| 20 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).B.C.D. S.O.R. Item No. 5.3.11 |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.B.C.D. S.O.R. Item No. 5.3.17.6 |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.B.C.D. S.O.R. Item No. 5.3.17.5 |
| 23 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 24 | Providing TMT steel reinforcement as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.5.4 : 8mm dia Bar - |
| 25 | B.C.D. S.O.R. Item No. 5.5.5 (a) : 10mm dia Bar - |
| 26 | B.C.D. S.O.R. Item No. 5.5.5 (b) : 12mm & above dia Bar - |
| 27 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.24 |
| 28 | Supplying, fitting and fixing 20 guage G.C.I. sheet gate fitted on M.S. angle frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.30 |
| 29 | Providing two coat of painting with ready mixed paint over primer one coat of red lead paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.41 + 5.8.43 |
| 30 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 31 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 32 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 33 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 34 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 35 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 36 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 37 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 38 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 39 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 40 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 41 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 42 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 43 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 44 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 45 | Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 46 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 47 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 48 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I With \\"A\\" grade white 15X15cm Tiles. |
| 49 | Providing and laying hydraulically machine pressed terrazo tiles 20mm thick of approved texture with down marble chips of approved shade, size and quality, laid on 19mm. Thick bed of lime mortar (1:1:1:) (lime: surkhi :sand) with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing , royalty and taxes all complete as per building specification and direction of E/I. (a) Grey colour with 100% ordinary cement |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 51 | Supplying tools and making connection of new G.I.distribution branch 15mm to 50mm dia with existing G.I.main by providing and fixing G.I.Tee including cutting of pipe etc all complete. (a) 15 mm dia |
| 52 | (b) 20 mm dia |
| 53 | © 25 mm dia |
| 54 | Cutting chajja or cornice for laying G.I.pipe and restoring the same with RCC (1:2:4) bricks works in cement morter (1:4) and cement plaster (1:4) as per specification and direction of E/I |
| 55 | Cutting floor for laying G.I. Pipe and restoring the same as per specification etc all complete. |
| 56 | Providing and fixing male ended 15 mm dia brass bib cock of approved quality etc all complete. |
| 57 | Providing & fixing brass/CI stop cock of approved quality all complete. |
| 58 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 59 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S. approved make supported on painted C.I. or R.S.brackets 32mm C.I.brass waste,15mm dia C.I.body brass spindle stop cock of approved quality of weight not less than 350grams,32mm P.V.C.waste pipe 750mm long with brass coupling at one end and making plumber joints etc all complete as per specification and direction of E/I. |
| 60 | Providing & laying 110 mm dia PVC Pipe for outlet of water to outlet drain including all accessories i.e. solvent cement,clamp,ring sockets etc (Supreme make) |
| 61 | Supplying and fixing GI fitting of approved make all complete as per E/I (A) Elbow (i) 15 mm dia |
| 62 | (ii) 20 mm dia |
| 63 | (iii) 25 mm dia |
| 64 | (i) 15 mm dia |
| 65 | (ii) 20 mm dia |
| 66 | (iii) 25 mm dia |
| 67 | (i) 20 mm dia |
| 68 | (ii) 25 mm dia |
| 69 | (i) 15 mm dia |
| 70 | (ii) 20 mm dia |
| 71 | (iii) 25 mm dia |
| 72 | (i) 15 mm dia |
| 73 | (ii) 20 mm dia |
| 74 | (i) 15 mm dia |
| 75 | (ii) 20 mm dia |
| 76 | (iii) 25 mm dia |
| 77 | (i) 15 mm dia |
| 78 | (ii) 20 mm dia |
| 79 | (iii) 25 mm dia |
| 80 | (i) 15 mm dia |
| 81 | (ii) 20 mm dia |
| 82 | (iii) 25 mm dia |
| 83 | (i) 20 mm dia |
| 84 | (ii) 25 mm dia |
| 85 | (iii) 32 mm dia |
| 86 | (i) 15 mm dia |
| 87 | (ii) 20 mm dia |
| 88 | (iii) 25 mm dia |
| 89 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disPosal of excavated earth as obtained to a distance uPto 50.00 M including all Iifts, levelling, ramming roots of tree shurbs all complete as per approved design, building, speciFication and direction of E/I. |
| 90 | Providing brick flat soling work with designation 75A bricks joints filled with local sand free from clay contents including royalty and all taxes etc. complete job as per specification and direction of E/I. |
| 91 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 92 | Providing designation 75A brick work in C.M. (1:4) in fnd with approved quality of clean coarse sand of F.M. 2 to 2.50 including providing l0mrn thick mortar joints.Cost of screening materials,scaffolding, raking out joints to 15rnm depth curing, taxes and royalty all complete as per building specification and direction of E/L |
| 93 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 94 | Iron and steel material Angle size in mm (i) 50mmx 50mmx 6mm /6/8/10 (Gr-A) SOR SLN 158 (b) (i) page n-43 |
| 95 | Drilling 6mm dia hole M.S. angle iron for fixing of staples etc. as per building specification and direction of E/I. |
| 96 | Labour for cutting of M.S. angle iron post to required length, one end splitted as fishtailed in a length of 150mm complete as per building specification and direction of E/I. |
| 97 | Welded wire mesh (Link Wire fencing) |
| 98 | Labour for fitting & fixing G.I. woven wire fencing including fixing of post in cement concrete at 2.5 M centres including cost of staples (but excluding the cost of cement concrete angle iron post ,its cutting and making holes,nuts and bolts) all complete as per building specification and direction of E/I. |
| 99 | Spreading of sludge farm yard manure or/and good earth in required thickness (cost of sludge,farm yard manure or/and good earth to be paid for separately) |
| 100 | Cement |
| 101 | Stone chips |
| 102 | Steel |
| 103 | Brick |
| 104 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.D.S.R. 18.9.4 |
| 105 | Supplying fitting and fixing of approved make 1.50 HP Submersible pump set having head of 135 metre including all taxes, royalty, etc.all complete job as per direction of E/I.(M1055 : DW&S) |
| 106 | Supplying fitting and fixing of 5 H.P. standard make starter panel board with arrangement of all necessary protection including all taxes,royalty etc all comlete job as per direction of E/I.(M1065 : DW&S) |
| 107 | Supplying fitting and fixing 3 core 4mm2 flat copper submersible cable approved make including all taxes,royalty etc all complete job as per direction of E/I.(M1906 : Energy) |
| 108 | Wiring for light/Power plug with 2 x 4 Sqmm. FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 no 4 Sqmm, FRPVC insulated copper conductor single core cable for loop earthing as required. |
| 109 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 Amp. One Way Switch |
| 110 | 3 pin 5/6 Amp. Socket Outlet |
| 111 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 112 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 113 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 114 | Supplying and fixing 2 pin, 5 amp ceiling rose on the existing junction box/wooden block including connection etc. as required. |
| 115 | Supplying and fixing brass batten/angle holder including connection etc. as required. |
| 116 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 117 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 Way, Single Door |
| 118 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, \\"B\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.6/32 amps, Single Pole, \\"B\\" Series |
| 119 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 120 | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. |
| 121 | Supplying and fixing 9/10 watt LED bulb of Bajaj, Phillips or equivalent make as required. |
| 122 | S.I.T.C. of following rating surface mounted LED tube light fittings suitable for 230 V, 50 Hz, single phase supply etc.complete as required.20/22 watt LED Tubelight |
| 123 | Supplying and fixing single arm - 1 m long for steet lighting fixture as required. |
| 124 | S.I.T.C. of following rating LED street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270 V AC, 50 Hz. Luminarie shall be confirm to IS-10322/Part-5/Section-3 and shall be complete with all accessories as required.45/48 Watt LED Street Light |
| 125 | S.I.T.C. of following size ceiling fan 3 blades confirming to IS:374/2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper wire suitable for 230 V, 50 Hz, single phase supply etc. complete as required.1200mm (48\\") Ceiling Fan |
| 126 | Supplying 12\\" (300mm) dia metal exhaust fan complete with all accessories of approved quality. |
| 127 | GST @ 18% |
| 128 | Labour cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender