Tender For R/Mtc. Of Rws Schemes Under Rupaichari R.D Block / S.H:- Lifting And Lowering Of Submersible Pump And Motor Sets And Re-Winding Of Various Make Submersible Motors And Repairing Of Various Make Submersible Pumps At Different Existing Dtw Sc
Tender Value
6.48 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
6 days left
EMD
12977
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for R/Mtc. Of Rws Schemes Under Rupaichari R.D Block / S.H:- Lifting And Lowering Of Submersible Pump And Motor Sets And Re-Winding Of Various Make Submersible Motors And Repairing Of Various Make Submersible Pumps At Different Existing Dtw Schemes At Rupaichari Sector Under Rupaichari Sector Within The Jurisdiction Of Dws Sub-Division, Rupaichari During The Year 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | Lifting of submersible pump with delivery assembly by heavy duty chain - pully after dismantling from delivery line and staking properly as per direction of the Engineer-in-charge. |
| 2 | Labour charge for fitting fixing and lowering of Submersible pump sets with the delivery assembly 900 to 00 in/c.re-fitting fixing the delivery line etc. as per direction of the Engineer-in-charge. |
| 3 | Supplying and fitting fixing of following spare parts of approved quality suitable for submersible pump motor etc as per direction of the Engineer-in-charge.Full threaded nuts & bolts 12 mm dia. 50 mm long. |
| 4 | Supplying and fitting fixing of rubber insertion 3 mm thick of 150 mm dia. to the G.I Column pipes as per direction of the Engineer-in-charge. |
| 5 | Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer in-charge ( G.I. pipe will be provided by the agency at his own cost & risk). |
| 6 | i) For 100 mm dia. G.I. pipe with 10 mm thick GI flange. |
| 7 | ii) 80 mm dia. G.I pipe with 10 mm thick GI Flange. |
| 8 | iii) 65 mm dia. G.I pipe with 10 mm thick GI Flange. |
| 9 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Eng.-in-charge. |
| 10 | i) 10.00 Sqmm. |
| 11 | ii) 6.0 Sqmm. |
| 12 | iii) 4.0 sqmm. |
| 13 | Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 14 | Repair and maintenance of 10 HP /12.5 HP Motor suitable for 5000 GPH capacity submdersible pump set by complete dismantling in/c. providing & fitting fixing of PVC (IS: 8783-1978) insultted electro grade copper (IS: 6613-1984) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 15 | Repair and maintenance of 15 HP /17.5 HP Motor suitable for 7500 GPH capacity submdersible pump set by complete dismantling in/c. providing & fitting fixing of PVC (IS: 8783-1978) insultted electro grade copper (IS: 6613-1984) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 16 | Repair and maintenance of 20 HP /22.5 HP Motor suitable for 10000 GPH capacity submdersible pump set by complete dismantling in/c. providing & fitting fixing of PVC (IS: 8783-1978) insultted electro grade copper (IS: 6613-1984) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 17 | Repair and maintenance of 2500 GPH capacity submdersible pump by complete dismantling in/c. providing & fitting fixing of all necessary spare parts (conforming to IS: 8034) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 18 | i) Bronze/ SS Impeller |
| 19 | ii) Bronze grade LTB 2 / Cutless rubber Bush |
| 20 | iii) Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 21 | iv) Cast iron grade (FG200) discharge casing |
| 22 | v) Cast iron grade (FG200) suction casing |
| 23 | vi). Cast iron grade (FG200) pump bowl/ diffuser |
| 24 | vii) SS Impeller lock |
| 25 | viii) SS half coupling |
| 26 | ix) Stud bolt & nut |
| 27 | x) Dismantling, repairing, reassembling, servicing |
| 28 | Repair and maintenance of 5000 GPH capacity submdersible pump by complete dismantling in/c. providing & fitting fixing of all necessary spare parts (conforming to IS: 8034) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 29 | i) Bronze/ SS Impeller |
| 30 | ii) Bronze grade LTB 2 / Cutless rubber Bush |
| 31 | iii) Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 32 | iv) Cast iron grade (FG200) discharge casing |
| 33 | v) Cast iron grade (FG200) suction casing |
| 34 | vi) Cast iron grade (FG200) pump bowl/ diffuser |
| 35 | vii) SS Impeller lock |
| 36 | viii) SS half coupling |
| 37 | ix) Stud bolt & nut |
| 38 | x) Dismantling, repairing, reassembling, servicing |
| 39 | Repair and maintenance of 7500/10000 GPH capacity submdersible pump by complete dismantling in/c. providing & fitting fixing of all necessary spare parts (conforming to IS: 8034) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 40 | i) Bronze/ SS Impeller |
| 41 | ii) Bronze grade LTB 2 / Cutless rubber Bush |
| 42 | iii) Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 43 | iv) Cast iron grade (FG200) discharge casing |
| 44 | v) Cast iron grade (FG200) suction casing |
| 45 | vi) Cast iron grade (FG200) pump bowl/diffuser |
| 46 | vii) SS Impeller lock |
| 47 | viii) SS half coupling |
| 48 | ix) Stud bolt & nut |
| 49 | x) Dismantling, repairing, reassembling, servicing |
| 50 | Providing, fitting fixing and installation of 10000 GPH x 76 mtrs. Head water lubricated submersible pump of maximum 150 mm outer dia. With maximum 10(ten) stages coupled with required water and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50Hz, A.C supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less PVC 3 (three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 Nos. suitable cable guard with clips and nuts & bolts, 2 (two) pair M.S. column clamps as per direction of Engineer-in-charge conforming to terms & conditions of the contract (Each pump with motor shall consists of stainless steel closed type impeller , C.I. bowl, C.I discharge case, pump shaft (stainless steel), bush (bronze), shaft sleeve (bronze/ chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes of made DUKE/KSB/WPIL/CRI). |
| 51 | Providing, fitting fixing and installation of 5000 GPH x 76 mtrs. Head water lubricated submersible pump of maximum 150 mm outer dia. With maximum 10(ten) stages coupled with required water and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50Hz, A.C supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less PVC 3 (three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 Nos. suitable cable guard with clips and nuts & bolts, 2 (two) pair M.S. column clamps as per direction of Engineer-in-charge conforming to terms & conditions of the contract (Each pump with motor shall consists of stainless steel closed type impeller , C.I. bowl, C.I discharge case, pump shaft (stainless steel), bush (bronze), shaft sleeve (bronze/ chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes of made DUKE/KSB/WPIL/CRI). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender