Tender For R/ maintenance Of Rws Schemes/S.H:- Maintenance And Repairing Of Pipeline Leakage, Washingof Pipeline, maintenance Of Hydrant In/C. maintenance Of Sluice Valve Of Existing Water Supply Schemes At Different Locations Of Chalita Bankul Secto
Tender Value
6.30 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
3 days left
EMD
12617
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for R/ maintenance Of Rws Schemes/S.H:- Maintenance And Repairing Of Pipeline Leakage, Washingof Pipeline, maintenance Of Hydrant In/C. maintenance Of Sluice Valve Of Existing Water Supply Schemes At Different Locations Of Chalita Bankul Sector Within The Jurisdiction Of Dws Sub-Division, Rupaichari Under Rupaichari Block During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for repairing of leakage in UPVC / HDPE pipe line with PVC coupler & solvent cement etc. including necessary earth excavation, backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. complete as per specification & direction of the Engineer-in-charge. |
| 2 | i) 90 mm OD |
| 3 | ii) 110 mm OD |
| 4 | iii) 140 mm OD |
| 5 | Clearing of diposited iron inside of laid PVC pipe line (90 mm/110 mm / 140 mm) excavation trenches for 100.00 mtr laid pipe line of required width and depth at an interval of 2.00 mtr to 3.00 mtr long for every 100.00 mtr. Clearing through UPVC coil pipe and laying same with coupler and cement solvent joint (PVC coupler and solvent cement to be issued at free of cost from the department). |
| 6 | Clearing of diposited iron inside of laid CI/DI pipe line of different dia. (150 mm/100 mm / 125 mm) and dismantling including trenching, refilling for every 100.00 mtr laid pipe line of required widht and depth, cutting for every 100.00 mtr pipe iron throug PVC coil pipe after clearing washing and laying the same with rubber gusket pipe layed joint as per direction of the Engineer-in-charge. (Pig lead will be issued by the department at free of cost but rubber gusket and other T&P will be arranged by the agency) |
| 7 | Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 8 | i) 90 mm dia. |
| 9 | ii) 110 mm dia. |
| 10 | iii) 140 mm dia. |
| 11 | Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 12 | i) 90 mm dia. |
| 13 | ii) 110 mm dia. |
| 14 | Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 15 | i) 90 x 90 mm dia. |
| 16 | ii) 110 x 110 mm dia. |
| 17 | iii) 140 x 140 mm dia. |
| 18 | Providing, fixing and laying fabricated UPVC straight reducer conforming to IS : 10124 ( Part 3 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 19 | i) 110 x 90 mm dia. |
| 20 | ii) 140 x 110 mm dia. |
| 21 | iii) 140 x 90 mm dia. |
| 22 | Providing, fixing and laying rigid UPVC pipes conforming to IS: 4985 jointing with couplers, of same class conforming to IS :10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A. Class - 3 ( working pressure 6.0 kg / cm2) |
| 23 | i) 40 mm OD. |
| 24 | ii) 50 mm OD. |
| 25 | Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope-1 in 200) including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge. A) For UPVC pipes in new work.a) In all kinds of soil.i) For pipes not exceeding 90 mm dia. |
| 26 | Providing and fixing C.I non-return valve of approved quality as per of CPWD specification and direction of the Engineer- in- charge.i) 100 mm dia. |
| 27 | Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge. |
| 28 | i) 100 mm dia. |
| 29 | ii) 150 mm dia. |
| 30 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. |
| 31 | i) 80 mm dia.A) PN - 1.6 |
| 32 | ii) 100 mm dia.A) PN - 1.6 |
| 33 | iii) 125 mm dia.A) PN - 1.6 |
| 34 | iv) 150 mm dia.A) PN - 1.6 |
| 35 | Constructing masonry Chamber 90 x 90 x 100 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge.A) With 1st class bricks. |
| 36 | Providing and laying of flexible PVC pipe (conforming to IS:7634) complete as per specification and direction of the Engineer - in - charge (cost of earth work and fittings will be paid separately). |
| 37 | i) 15 mm dia. |
| 38 | ii) 25 mm dia. |
| 39 | iii) 32 mm dia. |
| 40 | Providing and fixing brass ferrule with C.I. cover conforming to IS : 2692 including boring and tapping the main as per CPWD specification and direction of the Engineer - in - charge.i) 15 mm nominal bore |
| 41 | Making road crossing by horizontal boring for smooth laying of UPVC / CI / DI / GI pipes etc. of required dia complete as per specification and the direction of the Engineer-in-charge. i) By manual means |
| 42 | Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge. i) 15 mm dia. |
| 43 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.i) 15 mm dia. |
| 44 | Providing and fitting fixing PVC / plastic bib cock conforming to IS : 9763 in hydrant points at different location as per specification & direction of the Engineer-in-charge. i)15 mm dia. PVC /plastic bib cock. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender