Educational and Research Institute Government Departments Closing in 1 days TDR #57201333

Tender For Augmentation Of Power Supply In G Type Quarters At Durga Mandir Area Iit Kharagpur

Issued by Government Departments · Medinipur West, West Bengal
Tender Value
35.72 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
1 days left
EMD
71455
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Augmentation Of Power Supply In G Type Quarters At Durga Mandir Area Iit Kharagpur

BOQ

Name of Work:- Augmentation of Power Supply in G Type quarters at Durga Mandir area IIT Kharagpur
Sl. No. Item Description
1Laying of 1.1 kV grade cable of following sizes in underground trench excavation in single tier formation (Horizontal) for any type of soil. The trench of 760 mm average depth with brick protection on the top of each cable with 8 nos. bricks per mtr on cables including filling the space between the bricks and cables and also the trench with shifted soil, levelling up and restoring the surface duly rammed of following sizes cables.
2Up to 25 Sqmm
3Up to 3.5 core 70 Sqmm
4Up to 3.5 core 95 Sqmm
5Laying of cable on wall / surface including S & F M.S. shaddles, with earthing arrangement with 10 SWG G.I. wire, making holes etc. as necessary & mending good the damages and painting of cables of the following sizes.
6a) up to 2/3.5 / 4 Core Upto 25 Sqmm
7Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core
8Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core
9Retrieving of service cable from under ground trench which includes excavation of earth, removing of brick protection This job includes relaying the same cable using the same trench and unbroken bricks and then re-fling, the trench with shifted soil and restoring the surface duly rammed as instructed by the site –in-charge.
10Laying of G.I. Pipe across the road through horizontal boring without damaging the road surface below 1m of the road level (G.I. Pipe supplied by the Department) along with mending good damages of the roads if needed.
11Supply of medium gauge 100 mm dia GI pipe ( make Bansal / TATA/ Jindal)
12Supply, Erection, testing and commissioning of out door double door type feeder pillar box comprising of incoming and out going MCCB’s, Spreader links, extended Rotary handle, Aluminum Bas bar etc, and others (strictly as per annexure -1 ) , preffered make : MCCBs : Hager, Schneider, Legrand, Siemens , ABB or approved by EIC, . I/C switch:- a) 4 pole 36 KA 400 A MCCB ( TM release) with auxiliary contact & 230 Volt Shunt trip coil - 1 numbers, b) SPD Imax 12.5kA (Remote Signaling)-1 no, O/G switches a) 4 pole 25 KA 160 A MCCB ( TM release) - 5 number. b) 4 pole 25 KA 63 A MCCB ( TM release) - 4 Numbers. TPN Al Bus bar of 600 A capacity, This job includes erection the new FP with new masonary base & net cementing shall be done by casting PCC around the feeder pillar base (Minimum 4 ft width from the Base)as directed by the EIC, Connection of incomming and out going cables and connection of earth bar with earthingn by 25 x 6 mm GI earth bar. ( For G type)
13Supply, Erection, testing and commissioning of out door double door type feeder pillar box comprising of incoming and out going MCCB’s, Spreader links, extended Rotary handle, Aluminum Bas bar etc, and others (strictly as per annexure -2 ) , preffered make : MCCBs : Hager, Schneider, Legrand, Siemens , ABB or approved by EIC, . I/C switch:- a) 4 pole 25 KA 160 A MCCB ( TM release) - 1 numbers, O/G switches a) 4 pole 25 KA 125A MCCB ( TM release) - 1 number. :-b) 4 pole KA 63 A MCCB - 10 Numbers. TPN Al Bus bar of 350 A capacity, This job includes erection the new FP with new masonary base & net cementing shall be done by casting PCC around the feeder pillar base (Minimum 4 ft width from the Base) as directed by the EIC, Connection of incomming and out going cables and connection of earth bar with earthingn by 25 x 6 mm GI earth bar. ( For G type)
14Supply, Erection, testing and commissioning of out door double door type feeder pillar box comprising of incoming and out going MCCB’s, Spreader links, extended Rotary handle, Aluminum Bas bar etc, and others (strictly as per annexure -3 ) , preffered make : MCCBs : Hager, Schneider, Legrand, Siemens , ABB or approved by EIC, . I/C switch:- a) 4 pole 25 KA 160 A MCCB ( TM release) - 1 numbers, O/G switches :-a) 4 pole 63 A MCCB ( TM release) - 10 Numbers. TPN Al Bus bar of 350 A capacity, This job includes erection the new FP with new masonary base & net cementing shall be done by casting PCC around the feeder pillar base (Minimum 4 ft width from the Base) as directed by the EIC, Connection of incomming and out going cables and connection of earth bar with earthingn by 25 x 6 mm GI earth bar. ( For G type)
15Supply, Erection, testing and commissioning of out door double door type feeder pillar box comprising of incoming and out going MCCB’s, Spreader links, extended Rotary handle, Aluminum Bas bar etc, and others (strictly as per annexure -4 ) , preffered make : MCCBs : Hager, Schneider, Legrand, Siemens , ABB or approved by EIC, . I/C switch:- a) 4 pole 25 KA 125 A MCCB ( TM release) Outgoing Switches: a) 4 pole 25 KA 63 A MCCB ( TM release) - 10 number. :- TPN Al Bus bar of 250 A capacity, This job includes erection the new FP with new masonary base& net cementing shall be done by casting PCC around the feeder pillar base (Minimum 4 ft width from the Base) as directed by the EIC ,Connection of incomming and out going cables and connection of earth bar with earthingn by 25 x 6 mm GI earth bar. ( For G type)
16Supply, Erection, testing and commissioning of out door double door type wall mounted feeder box comprising of incoming and out going MCB’s, Spreader link, Aluminum Bas bar etc, and others (strictly as per annexure -5 ) , preffered make : MCBs : Hager, Schneider, Legrand, Siemens , ABB or approved by EIC, . I/C switch:- a) 10 KA 4 pole 63 A MCB ( Type-C) - 1 numbers, O/G switches a) 10 KA 40 A DP MCB(C- curve) - 6 number. :- TPN Al Bus bar of 100/125 A capacity, This job includes erection of feeder box on the wall and installation of 2 nos 1.5 Mtr long spike earthing for individual box. as directed by the EIC ,Connection of incomming and out going cables and connection of earth bar with earthing by 10 SWG GI wire
17Supplying and making end termination with brasscompression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
182 core 10 sq mm
19up to 25 Sqmm
203.5 core 70 Sqmm
213.5 core 95 Sqmm
223.5 core 185 Sqmm
23Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
24Ssupply and making spike earthing arrangement with of 18 mm dia 1 mtr long GI earth spike and connection from GI spike to loop box with 10 SWG GI wire
25Earthing with GI earth pipe 4.5 mtr long 40 mm dia, including accessories and providing masonaryy enclosure with cover plate having locking arrangementand watering pipe etc with charcoal salt as required.
26Dismantle the existing Feeder Pillars, cable and MCCBs, MCBs and Isolators and refixing if needed, and deposit the dismantle materials to the authority. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57201333
AUTHORITY Government Departments
TENDER VALUE 35.72 Lakhs
LAST DATE 15-09-2026
Authority
Authority Name Indian Institute Of Technology
Work Description Tender for Augmentation Of Power Supply In G Type Quarters At Durga Mandir Area Iit Kharagpur
Basic Detail
Tender No IIT/IW/EM/NIT/62/2026-27
Bidding Type Tender
Location
City Medinipur West
State West Bengal
Key Dates
Publish Date 25 Aug 2026
Submission Date 15 Sep 2026
Open Date 16 Sep 2026
Finance
Tender Value 35.72 Lakhs
Tender Fee Ref. Documents
EMD 71455
Exemption Not Available
Document List
BOQ_970606.xls
ef6b4730-ee6e-4d0f-9d03-7b7d1bcc6352.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 25, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Sep 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_970606.xls

html

ef6b4730-ee6e-4d0f-9d03-7b7d1bcc6352.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders