Tender For Attending Repairs To Mini Power Pumps , Borewells & Corresponding Pipe Lines At Ward 23 To 33 In Palani Municipality
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
13 days left
EMD
9900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Attending Repairs To Mini Power Pumps , Borewells & Corresponding Pipe Lines At Ward 23 To 33 In Palani Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Labour charges for the Removal of Submersible pumpsets and its accessories from borewell/ open well for attending repairs including removing submersible cable the starter to required depth and also removing of riser pipe etc., complete (Up to 5HP) |
| 2 | Labour charges for the Re-erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days (Up to 5HP) |
| 3 | Rewinding & Reconditioning of Submerssible Motors for Bore Wells. The rate includes material cost , labour cost for rewinding etc. complete.Up to 3 HP motor rewinding work |
| 4 | For 4 & 5HP motor rewinding work |
| 5 | Replacement of gunmetal thrust bearing including labour charges upto 5 HP |
| 6 | Replacement of motor upper body bearing bushes / Lower body bushes upto 5 HP |
| 7 | Replacement of pumpstage impeller - 1.No brass (deduting the cost of old impeller) upto 5 HP |
| 8 | Replacement of pump impeller bushes upto 5HP |
| 9 | SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase /50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).For 2.0 HP Motors |
| 10 | Replacement of Over Load Relay suitable for upto 3HP |
| 11 | Replacement of 150/200 Mfd Condensor suitable for single phase Submerssible Motor up to 3HP |
| 12 | Replacement of 20Amp 2 pole Contactor suitable for upto 3HP Submerssible Motor |
| 13 | Supply , Delivery & fixing of Fuse Carrier of suitable Amps. 32 Amps Porcelain Fuse Unit (500V) |
| 14 | 63 Amps Porcelain Fuse Unit (500V) |
| 15 | Supply & Delivery & Erection of special accessoriesincluding cost and conveyance of all materials and cost of all incidential charges etc., complete.(Bore Clamp) |
| 16 | 5\\" Bore Cap |
| 17 | 1 1/4\\" (32mm )dia GI Pipe 32mm Gi pipe |
| 18 | 1 1/4\\" (32mm )dia GI Union |
| 19 | 1 1/4\\" (32mm )dia GI Coupler |
| 20 | 1 1/4\\" (32mm )GM Gate Valve |
| 21 | 1 1/4\\" (32mm)dia GI Elbow |
| 22 | 1 1/4\\" (32mm)dia GI Tee |
| 23 | 32mm x 25mm dia GI Reducer elbow |
| 24 | 32mm x 25mm dia GI Reducer tee |
| 25 | Adapter 32mm |
| 26 | 32mm Hex Nipple |
| 27 | supply and fixing of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 (25mm (3/4”)) |
| 28 | 32mm (1”) U PVC ball valve |
| 29 | Supply and Fixing of PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER (4.0 sqmm) |
| 30 | 6.0 sqmm 3 CORE FLAT TYPE COPPER CABLE |
| 31 | Repair and Maintanance of Exist Panel Board service work for including labour charges complete etc..,2 HP Panel Board |
| 32 | Supplying and delivery of 32 mm OD dia UPVC Pipes of approved quality and best varity of B Class pipe etc., complete.with necessary water cealing arrangements. |
| 33 | SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/ diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 % Duty (20 lpm X 100 m) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender