Tender For Special Repair To Water Supply Distribution Lines Of Offr, Jco And Or Md Accn At Basistha, Provn Lines With Soakpit Near Cook House, Provn Of False Ceiling On 1St Floor And Tiling On Ground Floor Incl Portico, Verandah At Bldg No P-1 At Sh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
19 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Water Supply Distribution Lines Of Offr, Jco And Or Md Accn At Basistha, Provn Lines With Soakpit Near Cook House, Provn Of False Ceiling On 1St Floor And Tiling On Ground Floor Incl Portico, Verandah At Bldg No P-1 At Shantipur Under Ge Guwahati
BOQ
| Sl. No. | Item Description |
| 1 | E/M PORTION |
| 2 | Taking up or down unserviceable GI tube of any grade including all fittings such as bend, tee, socket and union etc and shifting to near site complete all as specified and as directed and following sizes : |
| 3 | (a) 150 mm dia |
| 4 | (b) 100 mm dia |
| 5 | (c) 80 mm dia |
| 6 | (d) 50 mm dia |
| 7 | (e) 40 mm dia |
| 8 | (f) 32 mm dia |
| 9 | (g) 25 mm dia |
| 10 | (h) 20 mm dia |
| 11 | M&L for GI water tubing medium grade including all fittings (such as ends,Bend,elbows, unions, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions ,etc) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls,floors etc and their making good fixed complete laid in wall/ceiling/floor complete all as specified and directed of following dia : |
| 12 | (a) 150 mm dia |
| 13 | (b) 100 mm dia |
| 14 | (c) 80 mm dia |
| 15 | (d) 50 mm dia |
| 16 | (e) 40 mm dia |
| 17 | (f) 32 mm dia |
| 18 | (g) 25 mm dia |
| 19 | (h) 20 mm dia |
| 20 | S&F, in repair, 250 mm bore,ductile iron pipe with spigot and socket ends class K-9 in conforming to IS 8329, with push-on rubber gasket joints, suitable for and including tyton joints in any length laid in trenches, including all specials and jointing materials complete including taking down of old unsv CI pipe complete all as specified and as directed. |
| 21 | S&F, in repair, 200 mm bore, ductile iron pipe with spigot and socket ends class K-7 suitable for and including tyton joints in any length laid in trenches, complete including taking down of old unsv CI pipe complete all as specified and as directed. |
| 22 | S&F, in repair, 150 mm bore, ductile iron pipe with spigot and socket ends class K-7 suitable for and including tyton joints in any length laid in trenches, complete including taking down of old unsv CI pipe complete all as specified and as directed. |
| 23 | S&F, in repair, Ductile iron/Cast iron specials of spigot/socket/flanged ends like bend ( any type, radius and angle) Tapers of any type, straight, bend, increasing, decreasing or double socket etc , Tee pieces single branch, Y junction, double branch cross (all sockets or socket and spigot or flanged) Mechanical Joints, collars, caps and plugs etc for upto 250 mm dia pipes complete all as specified and as directed. |
| 24 | S&F, in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 110 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed. |
| 25 | S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 90 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed. |
| 26 | S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 63 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed. |
| 27 | S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 50 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed. |
| 28 | S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 40 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed. |
| 29 | S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 32 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed. |
| 30 | S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 25 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed. |
| 31 | S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 20 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places where directed complete all as specified and directed. |
| 32 | S&F in replacement PP-R Gate valves (brass insert) complete for outder dia of pipe 63 mm complete all as specified and directed. |
| 33 | S&F in repair 50mm outer dia PP-R Gate valve (brass insert) complete all as specified and as directed. |
| 34 | S&F in repair 40mm outer dia PP-R Gate valve (brass insert) complete all as specified and as directed. |
| 35 | S&F in repair 32mm outer dia PP-R Gate valve (brass insert) complete all as specified and as directed. |
| 36 | S&F in repair 25mm outer dia PP-R Gate valve (brass insert) complete all as specified and as directed. |
| 37 | S&F in repair 20mm outer dia PP-R Gate valve (brass insert) complete all as specified and as directed. |
| 38 | S&F in repair gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 50 mm bore pipe complete all as specified and as directed . |
| 39 | S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25 mm complete all as specified and directed. |
| 40 | S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm complete all as specified and directed. |
| 41 | S&F in repair 250 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed. |
| 42 | S&F in repair 200 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed. |
| 43 | S&F in repair 150 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed. |
| 44 | S&F in repair 100 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed. |
| 45 | S&F in repair 80 mm bore cast iron flanged & drilled both ends sluice valve, (ISI marked) long body type, conforming to IS 14846-2000; Class PN-1.6 with iron wheel head & brass spindle including all jointing materials and mild steel nuts, bolts, washers, rubber / fibre board gaskets etc and testing complete all as specified & directed. |
| 46 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc or for shaft, wells, cesspits, manholes, pier hole etc or for laying of GI/CI/DI pipe etc. not exceeding 10sq.m on plan and not exceeding 1.5m in depth and getting out including forming bottom surface in soft soil complete all as specified and as directed. |
| 47 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. |
| 48 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified and directed. |
| 49 | B/R PORTION |
| 50 | Excavation over areas n. exc 1.5 mtr deep and getting out soft/loose soil complete all as specified and directed. |
| 51 | Excavation over areas exc 1.5 mtr deep and not execeeding 3.0m deep and getting out soft/loose soil complete all as specified and directed. |
| 52 | M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 53 | M&L for brick work with sewer bricks, straight or curved on plan exc 6 metre mean radius as in full brick thick walls built in CM(1:4) using old size bricks for manhole/septic tank/ soak well etc in sewer works complete all as specified and as directed. |
| 54 | M&L for Brickwork with sub class ‘B’ bricks in half brick thick honey comb walling, built in CM 1:6 complete as specified and directed. |
| 55 | M&L for loose filling with broken bricks 40mm to 80mm complete all as specified and directed. |
| 56 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished fair and seven complete as specified and directed. |
| 57 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregated) as in concrete bed to drain pipe 200mm dia pipes including packing under and haunching against the sides of the pipes after laying & testing complete all as specified and as directed. |
| 58 | M&L for 200mm internal diameter salt glazed stone ware drain pipes grade 'A' laid in trenches & jointed as specified complete all as specified and as directed. |
| 59 | M&L cement concrete (1:3:6) type C1 using 40 mm graded stone aggregate as in surface channels and drains concrete complete all as specified and directed. |
| 60 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as directed. Note :- Measurment shall be taken only for inner girth. |
| 61 | Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto as above item |
| 62 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe complete all as specified and as directed. |
| 63 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to floor for 110 mm bore of pipe complete all as specified and directed. |
| 64 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 65 | S&F PVC (SWR) vent cowl of 110mm dia complete all as specified and as directed. |
| 66 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, Rough finished surfaces of concrete flat complete all as specified and as directed |
| 67 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc rough finished surface of concrete complete all as specified and directed. |
| 68 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified. |
| 69 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 70 | M&L for mild steel TMT bars 8mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed. |
| 71 | M&L for RCC (nominal mix) in (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings and mass concrete complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item |
| 72 | M&L for RCC (nominal mix) in (1:2:4) type B1 (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item |
| 73 | M&L for RCC (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, shelves and the like complete all as specified and as directed.Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 74 | Supply and fixing anodized aluminium snap grid frame work for false ceiling, size of grid 605mm x 605mm complete all as specified & as directed. |
| 75 | M & L for 4 mm thick, Non asbestos fibre cement building boards decorative type fixed in ceiling or laid/ inserted to timber/GI/Aluminium frame work with screws, etc complete as specified and as directed. |
| 76 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed. |
| 77 | Demolition of PCC in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL complete all as specified and directed. |
| 78 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in sub base and plinth protection, finished even and smooth w/o using extra cement complete all as specified and as directed. |
| 79 | M&L for prepolished chequered cement concrete, coloured tiles,textured finished of size 250 x 250 x 25/ 300x300x25 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 80 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick 1:6 complete all as specified and as directed. |
| 81 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished in vertical surfaces as in skirting ect and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender