Tender For Repair / Maintenance And Cleaning Of Sewage Installations Including Pipelines, Motor And Pumps Etc At Military Station Fazilkaat Mil Stn Abohar
Tender Value
15 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
14 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fazilka → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance And Cleaning Of Sewage Installations Including Pipelines, Motor And Pumps Etc At Military Station Fazilkaat Mil Stn Abohar
BOQ
| Sl. No. | Item Description |
| 1 | M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 5/7.5HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. |
| 2 | M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 10/12.5HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. |
| 3 | M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 15/20HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. |
| 4 | M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 25HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. |
| 5 | M&L for disconnecting/dismantling of unsv 3 phase 415 Volt 50 Hz AC electric induction motor, 40HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, services cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. |
| 6 | M&L for disconnecting/dismantling and taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 5HP/7.5 HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of insulated copper winding wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. |
| 7 | M&L for disconnecting/dismantling and taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 10/12.5HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of insulated copper winding wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. |
| 8 | M&L for disconnecting/dismantlingand taking out unsv 3 phase 415 Volt 50 Hz AC Non Clog Sewage Submersible Motor 15HP, transportation to Civil workshop and strip opening of worn out/ defective burnt stator winding, cleaning of stator slots, bearing bushes etc. and rewinding of stator coils with superior quality of insulated copper winding wire of existing size and specification including insulating material, varnishing and drying, re-assembling, installing and connected at original location complete all as specified and directed with entire satisfaction of Engineer-in-Charge. |
| 9 | M&L disconnecting/dismantling and taking out unsv non clog sewage submersible pump 5/7.5HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately) |
| 10 | Supply only CI Impellar for 5 / 7.5 HP Non Clog sewage submersible pump against item no 9 |
| 11 | Supply only Brash Bush for 5 / 7.5 HP Non Clog sewage submersible pump against item no 9 |
| 12 | Supply only Stainless steel shaft for 5 / 7.5 HP Non Clog sewage submersible pump against item no 9 |
| 13 | Supply only Sleeves for 5 / 7.5 HP Non Clog sewage submersible pump against item no 9 |
| 14 | M&L disconnecting/dismantling and taking out unsv non clog sewage submersible pump 10 to 15HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately) |
| 15 | Supply only CI Impellar for 10 to 15 HP Non Clog sewage submersible pump against item no 10 |
| 16 | Supply only Brash Bush for 10 to 15 HP Non Clog sewage submersible pump against item no 10 |
| 17 | Supply only Stainless steel shaft for 10 to 15 HP Non Clog sewage submersible pump against item no 10 |
| 18 | Supply only Sleeves for 10 to 15 HP Non Clog sewage submersible pump against item no 10 |
| 19 | M&L disconnecting/dismantlingand taking out unsv non clog sewage centrifugal pump 10 to 15HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately) |
| 20 | Gun metal Impeller for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 21 | Stainless steel shaft for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 22 | Thrust rod for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 23 | Distance sleave for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 24 | Motor Bush for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 25 | Sealing kit for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 26 | Thrust plate for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 27 | Pump coupling stainless with key for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 28 | Studs & Nuts for 10 to 15 HP Non Clog sewage centrifugal pump against item no 11 |
| 29 | M&L disconnecting/dismantling of unsv non clog sewage centrifugal pump 20 to 25HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge.(Note:- Unserviceable spare parts will be measured seperately) |
| 30 | Gun metal Impeller for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 31 | Stainless steel shaft for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 32 | Thrust rod for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 33 | Distance sleave for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 34 | Motor Bush for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 35 | Sealing kit for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 36 | Thrust plate for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 37 | Pump coupling stainless with key for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 38 | Studs & Nuts for 20 to 25 HP Non Clog sewage centrifugal pump against item no 12 |
| 39 | M&L disconnecting/dismantling of unsv non clog sewage centrifugal pump 40HP, transportation to Civil workshop for repairing, strip opening of worn out/defective parts, taking out unserviceable bush, sleeve & sleeve joint etc repair to impeller & shaft with proper brass brazing welding & lath work, assembling, testing and installing and connected at original location complete all as per specified and directed with entire satisfaction of Engineer-in-Charge. (Note:- Unserviceable spare parts will be measured seperately) |
| 40 | Gun metal Impeller for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 41 | Stainless steel shaft for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 42 | Thrust rod for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 43 | Distance sleave for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 44 | Motor Bush for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 45 | Sealing kit for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 46 | Thrust plate for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 47 | Pump coupling stainless with key for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 48 | Studs & Nuts for 40 HP Non Clog sewage centrifugal pump against item no 13 |
| 49 | S&F in replacement fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal encloser suitable for 12.5/15 HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge. |
| 50 | S&F in replacement fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal encloser suitable for 20/25 HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge. |
| 51 | S&F in replacement fully automatic star delta starter 3 phase 415 volts, 50 HZ AC in steel metal encloser suitable for 40 HP motor & relay range as recommended by manufacturer etc incl taking out unserviceable starter from existing position complete incl taking down the existing all as specified and directed by Engr-in-Charge. |
| 52 | S&F DOL starter 3 phase 415 volts, 50 HZ AC suitable for 5/7.5 HP motor & relay range as recommended by manufacturer. |
| 53 | Labour for taking out UNSV non clog submersible pump set including motor for repairing with the help of suitable T&P and refixing after repairing all as specified and directed by the Engr in charge |
| 54 | Dewatering of sewage water from UG sump with the help of suitable pump for getting out unservicable nonclog submersible pump for repairing all as specified and directed by the Engr in charge. |
| 55 | Supply and fixing sluice valve flanged type rating PN 1.6 size 150mm bore conforming to IS14846 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer- in- Charge. |
| 56 | Supply and fixing sluice valve flanged type rating PN 1.6 size 100mm bore conforming to IS14846 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer- in- Charge. |
| 57 | Supplying and fixing as in replacement of reflux (Non -return) valve flanged type rating PN 1.6 size 150mm bore conforming to IS 5312 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge. |
| 58 | Cleaning the sewage sump well of 5.65 mtr dia and depth exeeding 5 mtr but not exc 7.5 mtr by removing average 30 cum night soil and sediments including liquid by mean of suitable man power who is regularly dealing the same job with safty equipments, tools and safty measure as well as removing depositing the sludege obtained from cleaning out side the defence land and will be deposited in suitable pit all as specified and directed. |
| 59 | M&L for removing Beehives of any nos, size and at upto height of 22 mtrs at one place with in 15 mtr dia with all safety gear while removing hives with precautions at height and ladders required for climbing will carry, all as directed by engr-incharge. |
| 60 | Material & labour for preparation of complete surface by scrubbing old paint of pumping set incl electric motor & connected pipes of capacity upto 20 to 40HP and applying two coats of synthetic enamel paint etc complete all as specified and as directed by Engr-in-Charge |
| 61 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or manholes, cesspits, pipes and cables etc. not exc 10 Sqm on plan and getting out in soft / loose soil all as specified and directed by Engineer - in - Charge. |
| 62 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point |
| 63 | Returning, filling in, including spreading, levelling, watering and well ramming in layers of soft / loose soil not exceeding 25cm thick all as specified and directed by Engineer - in - Charge. |
| 64 | Taking up and down CI/DI water mains/sewage pipes (including all fittings) with spigot and socket ends and rubber gasket joints 150mm bore complete all as specified and directed by Engineer - in – Charge. |
| 65 | Supply ,laying jointing,commissioning and testing Ductile iron pipe with flanged end centrifugally cast(spun) class K-9 of size 150 mm dia conforming to IS-8329-2K in any length laid in trenches suitable for rubber push on tyton joints complete all as specified and directed. |
| 66 | Supply, Laying, jointing and testing mild steel pipe 100 mm bore, heavy grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed (Note: Excavation and earth work shall be measured and paid for separately) |
| 67 | M & L for cast/Ductile iron Fittings for spigot and socket pipes such as bends (any type, radius and angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, ‘Y’ junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore pipes all as specified and as directed by Engineer-in-Charge. |
| 68 | Taking out sluice valves, refacing, regrinding or replacing of check nut and refixing for 150mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 69 | Cleaning of Sewage collection tank at sewerage no.3 of size 62 X 31 X 3.5 Mtrs deep by removing vegetation & wild bushes with its roots from walls of tank completely and taking out mud, silt and sewage (the depth of sewage mix approx 1.5 m ) settled on bottom/ground of tank after draining out sewage water (the depth of sewage water approx 1.2m) and disposal of retrieved material and sewage water to municipal waste disposal area/plant/point as directed by Engineer-in-charge. |
| 70 | All as per ser Item no.1 but of size 22 X11 X 3 mtrs complete all as specified and directed by Engineer-im-Charge. |
| 71 | Cutting and Site clearance of bushes, Wild grass growth, Sarkanda etc. and removing rubbish by means of manpower or JCB machine and removing the waste to a distance not exceeding 50 mtr and depositing where directed by EIC |
| 72 | Repair to aerator motor of 5 HP with gearbox and chain assembly :-(a) 5 HP motor rewinding (b) Change of bush © Repair of gearbox (d) Replacement of shaft and its blades (e) DOL Starter compatible for outdoor mounting -01 Nos ( f) Copper Cable of Size 3 Core 1.5 Sqmm - 50 RM |
| 73 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth of not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to galvanized iron earth strip 25x4 mm thick fixed by means of bolts, nuts and washers and watering pipe 20mm die GI medium grade with socket and plug 30 cm above ground level including earthwork, PCC chamber in PCC (1:3:6) type C-2 using 40mm stone aggregate, cast iron cover, wire mean etc all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 complete and all as specified and directed by Engr-in-charge Notes :- (i) 25 mm die GI pipe for watering to be provided with a socket and plug and should be 30 cms above ground level. (ii) GI pipe 40 mm die protection pipe shall be provided upto Ground level. Please Enable Macros to View BoQ information |
| 74 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth of not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to galvanized iron earth strip 25x4 mm thick fixed by means of bolts, nuts and washers and watering pipe 20mm die GI medium grade with socket and plug 30 cm above ground level including earthwork, PCC chamber in PCC (1:3:6) type C-2 using 40mm stone aggregate, cast iron cover, wire mean etc all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 complete and all as specified and directed by Engr-in-charge Notes :- (i) 25 mm die GI pipe for watering to be provided with a socket and plug and should be 30 cms above ground level. (ii) GI pipe 40 mm die protection pipe shall be provided upto Ground level. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender