Tender For Provn Of Covering The Main Drain Of Hospital With Iron Grill Length 4 Km Breadth 300 Mm And Provn Of Equipment Earthing For Af Room At Hq Nc At Ch(Nc) Under Ge (Utilities) Udh Ur.
Tender Value
49.85 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
10 days left
EMD
99709
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Covering The Main Drain Of Hospital With Iron Grill Length 4 Km Breadth 300 Mm And Provn Of Equipment Earthing For Af Room At Hq Nc At Ch(Nc) Under Ge (Utilities) Udh Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Provn of covering the main drain of Hospital with iron grill length 4 KM Breadth 300 mm and Provn of equipment earthing for AF Room at HQ NC at CH(NC) under GE (Utilities) Udhampur. Contract No: GE/U-81/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Providing, fabricating and fixing Mild Steel drain covers, each cover being approximately 300 mm wide, over existing (or new) brick/RCC drains, comprising 6 mm thick MS chequered steel plate for complete continuous covering of the drain, supported on continuous MS Angle 50 × 50 × 6 mm frame. The supporting frame shall be properly aligned, levelled and securely connected to the existing brick/RCC drain walls using M10/M12 heavy-duty mechanical/chemical anchor fasteners at suitable spacing, generally 300–450 mm c/c, including drilling, cleaning of holes, nuts, washers, cleats, brackets and all necessary fixing accessories. At intervals not exceeding 4.0 m to 5.0 m, two numbers of openable MS grating covers shall be provided for periodic cleaning and maintenance of drains. Each grating cover shall be fabricated from MS Flat 40 × 6 mm longitudinal members with MS Square Bar 12 × 12 mm transverse members, welded together and enclosed in MS Angle Frame 40 × 40 × 5 mm. The openable grating covers shall be provided with heavy-duty MS hinges securely fixed to the main supporting frame, MS lifting/opening handles, stoppers and suitable locking/holding arrangement wherever required, allowing easy and repeated opening and closing for cleaning/desilting. |
| 3 | The grating covers shall be properly aligned and flush with the adjoining chequered plate cover. Item shall include all MS chequered plates, angles, flats, square bars, frames, stiffeners, hinges, handles, cleats, brackets, anchor fasteners, nuts, washers, welding electrodes and consumables, cutting, drilling, welding, grinding, fabrication, transportation, loading/unloading, erection, fixing and all incidental works, complete in all respects as directed by Engineer-in-Charge. Measurement shall be by actual weight of Mild Steel incorporated in the completed work. Note : This includes preparation of existing surfaces by making sufaces of PCC coping truely levelled by using pre-mixed ready-to-use concrete before fixing drain covers with frame to the entire satisfaction of Engineer-in-Charge. Nothing shall be paid extra for levelling mortar. |
| 4 | Preparation and painting of all surfaces of Mild Steel drain-cover components including 6 mm thick chequered plates, MS angle frames, openable grating covers, MS flats, square bars, hinges, lifting handles, cleats, brackets and other exposed steelwork, including removal of rust, mill scale, dirt, oil and grease by wire brushing/mechanical cleaning, surface preparation, application of one coat approved red oxide/zinc-rich anti-corrosive metal primer followed by two coats approved synthetic enamel/epoxy protective paint, including touch-up after fabrication, welding and fixing, complete all as specified and directed by Engr-in-Charge. |
| 5 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and removing demolished material out of MD land, complete all as specified and directed by Engr-in-Charge. |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (All kinds of soil), complete all as specified and directed by Engr-in-Charge. |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by Engr-in-Charge. |
| 8 | Material and labour for providing, mixing, laying, and compacting Plain Cement Concrete (PCC) nominal mix 1:4:8, Type D2 using 40 mm graded crushed stone aggregate, deposited in foundations, filling, and mass concrete works including filling in trenches, plinths, under floors, or concrete beds, complete all as specified and directed by Engr-in-Charge. |
| 9 | Plain cement concrete, (Nominal mix), Type B-1, 1:2:4 (using 20 mm graded crushed stone aggregates) as in cills, coping, apex stone, bed plates, surface channels, lintels upto 1.6 m clear span and in drain works, etc., including necessary form work, complete all as specified and directed by Engineer-in-Charge |
| 10 | Forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc, complete all as specified and directed by Engr-in-Charge. |
| 11 | Demolition of Brickwork or stone/ boulder masonry in cement mortar, complete all as specified and directed by Engr-in-Charge. |
| 12 | Providing and laying Pre-cast Cement Concrete Solid Block Masonry (Type C1) of thickness exceeding 10 cm in superstructure above plinth level up to floor two level. Blocks manufactured using a concrete mix design of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate of 20 mm nominal size), conforming to IS 2185 (Part 1), complete all as specified and directed by Engr-in-Charge. |
| 13 | Rendering of 10 mm thick high-performance ready-mix polymer-modified cement plaster finished even and smooth on faces of bricks work/stone work/concrete/PCC Block surface finished the surface even and smooth(without using extra cement) , complete all as specified and directed by Engr-in-Charge. |
| 14 | Providing and making core cutting of 110 mm to 150 mm dia through existing RCC/PCC/brick masonry wall of thickness 200 mm to 400 mm using suitable diamond core cutting machine, including setting up and operation of machine, cutting through complete thickness, removal of core, cleaning of opening and disposal of debris, and providing and fixing 110 mm dia uPVC pipe/sleeve of required length average 450mm in the core-cut opening, properly aligned and centred, including packing/filling the annular gap with approved non-shrink cementitious grout and sealing at both faces with approved waterproof PU/silicone sealant, complete including all materials, labour, T&P, consumables and making good, complete all as specified and directed by Engr-in-Charge. |
| 15 | M/L for providing chemical earthing complete with copper earth plate electrode 90 x 60 cm x 5.0mm thick buried directly in ground(Earth pit not less than 3.25 meters deep below ground level) with top edge of the plate not less than 2.4 meters below normal ground level, connected to copper earth lead 32 X 6 mm shows in sketch and connected to test point including Magnesium sulphate , salt and coal mixture in each layers with IS specification & necessary excavation/ earth work in any type of soil / rock strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, I watering pipe of 20 mm bore medium grade and lugs,including copper earth lead 32 X 6 mm with HDPE protection pipe of 40 mm 7.5 meter long, etc, complete all as specified and directed by Engr-in-Charge. |
| 16 | Providing and fixing 32mm X 6 mm copper strip on surface or in recess for connections etc as required , complete all as specified and directed by Engr-in-Charge. |
| 17 | Supplying and laying in replacement of GI tubing light grade 40mm bore for protection of strip fixing to pole/wall or in such similar position, complete all as specified and directed by Engr-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender