Tender For Repair / Maintanence Of Flooring , Plastering, Plumbing, Joinery, Sanitary Fittings And Other Misc Work In Otm Accn At Anand Parbat In Aor Of Age B/R-Ii Of Ge (North) Delhi Cantt-10
Tender Value
30 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
16 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintanence Of Flooring , Plastering, Plumbing, Joinery, Sanitary Fittings And Other Misc Work In Otm Accn At Anand Parbat In Aor Of Age B/R-Ii Of Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Complete removal of existing treatment of wall and applying average 1mm thick wall care putty two or more coat to get even and smooth surface and making the wall surface / Jambs/ Corners even and smooth and applying two coats of oil bound distemper over a coat a primer with fully automatic airless Spray technology with maximum working pressure complete all as specified and directed. |
| 2 | M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds, moss,efflorancr salt , trading oil and greasy spot with fully automatic airless Spray technology with maximum working pressure complete all as specified and directed. |
| 3 | M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit, moulds,filling gaps wth wall care putty, with fully automatic airless Spray technology with maximum working pressure complete all as specified and directed. |
| 4 | M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white/ Colour wash on walls complete all as specified and directed by Engineer-in-charge. |
| 5 | M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash with fully automatic airless Spray technology with maximum working pressure complete all as specified and directed. |
| 6 | M&L for preparation of old decorated surfaces of any description and applying one coats of cement base paint on external wall surface with fully automatic airless Spray technology with maximum working pressure complete all as specified and directed. |
| 7 | M&L for Complete removal of old surface and preparation of old decorated or previously treated wall surfaces, brooming down or steel wire brushing; scrapping down smoke soot moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of 100% Exterior and Interior Premium acrylic emulsion paint with fully automatic airless Spray technology with maximum working pressure having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/ old previously treated wall surfaces. |
| 8 | M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 9 | M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 10 | Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 250 to 500 ltrs capacity of tanks, complete all as specified and directed. |
| 11 | All as per the description of srl Item No 10 above but exc 500 ltrs and not exc 1000 ltrs. |
| 12 | Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water , |
| 13 | M&L 15mm thick Rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and fair without using extra cement all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for rendering 15mm thick in CM 1:4 over brick or concrete surfaces finishing the surfaces even and smooth w/o using extra cement. |
| 15 | M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth complete. |
| 16 | M&L for prepartion of newly plastered surface of wall and applying 3mm thick wall care putty two or more coat to get eeven and smooth surface (Birla white or equivalent) and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.. |
| 17 | M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed. |
| 19 | M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed. |
| 20 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 21 | S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed. |
| 22 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed. |
| 23 | All as per the description of srl Item No 22 above but exc 1.5 sqm but n.exc 4sqm each |
| 24 | Taking down shutters exc 1sqm but not exc 2 sqm each and all as directed. |
| 25 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed |
| 26 | S&F 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 27 | Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed. |
| 28 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. |
| 29 | M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer all as directed and specified. |
| 30 | S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified. |
| 31 | S&F solid door frame 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed. |
| 32 | S&F aluminum anodised powder coated frame for doors, windows, vantilator with one or more rebates including joining cleat for fixing etc. Complete all as specified. |
| 33 | S&F Anodised aluminium powder coated door,window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 34 | S&F factory made Aluminium window as per TD drg No. CEDZ/D-316 with following specifications:(i) outer frame of size 40mm x114mm with 1.3mm thickness, corner 45 degree cut aluminium welded (ii) center mullion of size 40mmx65mm(iii) welded shutter (02 nos) of size size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter(iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar(v) Welded wire mesh shutter(02 nos) of size 40x18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet.(vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE(vii) Window shall have provision for installation of window AC/Desert Cooler and provn of window glass shutter, wire mesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of Engr-in-charge.(viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. |
| 35 | S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete |
| 36 | S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified. |
| 37 | S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete. |
| 38 | S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified. |
| 39 | Dismantling Wall & ceiling boards any thickness, including cover fillets, Frame work etc. |
| 40 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles fully perforated 12mm thick micro tegular edged or 10mm thick square edged of Size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction. |
| 41 | M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 42 | Dismantling of old stone broken/cracked stone slabs in laid bedded and pointed in any morter complete all as specified and directed. |
| 43 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 44 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,window-cills, cooking platform and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 15mm thick bedding layer in cement mortar 1:6 as in cooking platform complete all as specified and directed. |
| 45 | M&L 4mm thick Aluminium Composit Panelling boards for partition wall fixed or laid / inserted powder coated Anodised Aluminium frame work with screws complete all as per manufacturers instructions and as directed.Note:- rates including Powder coated Aluminium Frame work of any Size for partition wall.) |
| 46 | Repair of Aluminium door shutters with chowkhats area exc. 1.5 sqm but n.exc 3.00 sqm taking down, re-setting easing fixing of cleats screws nut , bolts, fixing of hold fasts, fixing of Aluminium door stopper, change of PVC rubber beadings, complete repair for smooth functioning of door all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender