Tender For Repair Of Sofa Set 4/5 Seater And All Type Cushioned Chair, Charpoy Gi Pipe, Ip Folding Bed Hard Map Steel Under Ge (N) Bikaner.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
18 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Sofa Set 4/5 Seater And All Type Cushioned Chair, Charpoy Gi Pipe, Ip Folding Bed Hard Map Steel Under Ge (N) Bikaner.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 2.00 to 6.00 including preparation, S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawings and as directed by Engineer-in-Charge : |
| 2 | REPAIR TO SOFA SET 3 PCS 5 SEATER (FD- 258/281/373) |
| 3 | Arms made of 1st class hard wood (Teak wood) |
| 4 | Wooden batten of seat frame made of 1st class hard wood (Teak wood) |
| 5 | Wooden batten of back frame made of 1st class hard wood (Teak wood) |
| 6 | Front rail of seat of 3 Seater Sofa made of 1st class hard wood (Teak wood) |
| 7 | Side rail of seat of single/three Seater Sofa made of 1st class hard wood (Teak wood) |
| 8 | Front rail of seat of single Seater Sofa made of 1st class hard wood (Teak wood)) |
| 9 | Legs made of 1st class hard wood (Teak wood) |
| 10 | Back rail of Seat/Back of 3 Seater Sofa made of 1st class hard wood (Teak wood)) |
| 11 | Back rail of seat/Back of single Seater Sofa made of 1st class hard wood (Teak wood)) |
| 12 | Wooden Bearer of Seat/Back of 3 Seater Sofa made of 1st class hard wood (Teak wood) |
| 13 | S&F in replacement foam cushion (ISI Marked IS-1741) (Make : Kurl-On(Komfort Universe)/Sleepwell) 10 Nos in each set for sofa 3 pieces, 5 seater. Size of cushion 22\\"x21\\"x4\\" thick foam of 40 density for seat & back covered with superior quality tapestry cloth with Zip opening system as approved by Engr-in-charge/User. NOTE: The foam cushion in original packing with warranty card and tapestry cover (with zip opening system) shall be brought separately at furniture yard and after inspection the same shall be fixed. |
| 14 | Removing of old unserviceable tapestry cloth from existing foam cushion, supplying and fixing superior quality tapestry cloth, size of the cover should be 22\\"x21\\"x4\\" with Zip opening system of best quality easy to remove and wash of premium quality as approved by GE to the foam cushion (10 Nos in each set) as per existing. Complete all as directed. |
| 15 | CHAIR EASY CUSHIONED (FD-358) |
| 16 | Rear Legs Made of 1st Class hard wood (Teak Wood) |
| 17 | Front legs Made of 1st Class hard wood (Teak Wood) |
| 18 | Arms Made of 1st Class hard wood (Teak Wood) |
| 19 | Front/Back rails for seat Made of 1st Class hard wood (Teak Wood) |
| 20 | Side rails for seat Made of 1st Class hard wood (Teak Wood) |
| 21 | Top/Bottom rails for back Made of 1st Class hard wood (Teak Wood) |
| 22 | Side rails for back Made of 1st Class hard wood (Teak Wood) |
| 23 | S&F in replacement of unserviceable seat of chair easy as per existing pattern with 75mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 9mm commercial plywood as specified duly covered with well finished tapestry cloth/Rexine of approved shade and quality as directed by Engr-in- charge/GE. |
| 24 | S&F in replacement of unserviceable back of chair easy as per existing pattern with 50mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 9mm commercial plywood as specified duly covered with well finished tapestry cloth/Rexine of approved shade and quality as directed by Engr-in- charge/GE. |
| 25 | S&F Wooden Corner Brackets of size 75x75x25mm |
| 26 | CHAIR DINING OFFRS(FD/MAP-II/04)(FD/E6/MAP/10) |
| 27 | Rear Legs Made of 1st Class hard wood (Teak Wood) |
| 28 | Front legs Made of 1st Class hard wood (Teak Wood) |
| 29 | Bend Stiffners for back rest Made of 1st Class hard wood (Teak Wood) |
| 30 | Front/Side rails Made of 1st Class hard wood (Teak Wood) |
| 31 | Stiffners Made of 1st Class hard wood (Teak Wood) |
| 32 | Top/Bottom rails for back Made of 1st Class hard wood (Teak Wood) |
| 33 | S&F in replacement of unserviceable seat of chair Dining as per existing pattern with 75mm thick foam cushion of 40 density over 12mm commercial plywood BWR grade as specified duly covered with well finished tapestry cloth/Rexine of approved shade and quality as directed by Engr-in- charge/GE. |
| 34 | S&F in replacement of old/unserviceable tapestry cloth of seat of chair Dining as per existing pattern with new well finished tapestry cloth/Rexine of approved shade and quality as directed by Engr-in- charge/GE. |
| 35 | S&F Wooden Corner Brackets of size 75x75x35mm |
| 36 | DRESSING MIRROR GENTS (FD/E6/MAP/16) |
| 37 | S&F in replacement of unserviceable looking mirror 5.5 mm thick of Make : Modi Guard/Atul/Saint Gobain with new teak wood beading |
| 38 | S&F in replacement of unserviceable Back ply 12 mm thick as per Drg. |
| 39 | S&F new Teak Wood Brackets made out of 38x112x112mm with TW legs complete as shown on Drg |
| 40 | S&F in replacement of unserviceable 5.5mm glass shelves with glass holder |
| 41 | S&F new Cabinet complete with Teak Wood Frame for Mirror, all as per Drg but made with 18/19mm thick Prelaminated MDF Board Ext Grade of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) |
| 42 | TABLE DRESSING LADIES WITH MIRROR (FD-32(M)/251/378/FD/MAP-II/07) : |
| 43 | S&F, in repair, unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul/Saint Gobain along with new 6 mm thick commercial plywood back of mirror frame. Make : Green ply/Archid/Century Ply/Kit Ply |
| 44 | S&F Glass panes of shutters made of 5mm thick plane glass as existing of Make: Modiguard/Saint Gobain with aluminium sliding . |
| 45 | New 1st Class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete including Back Ply. |
| 46 | S&F, in repair, unserviceable Back of the Table Made of 12 mm thick Ply wood as shown in Drg. |
| 47 | S& F new drawers as per drawing(FD -251) |
| 48 | S&F new box complete of Table Dressing Ladies(FD/MAP-II/07) including drwers other than mirror with frame all as per Drg |
| 49 | S&F new SS Handles as approved by Engr-in-Charge |
| 50 | S&F new SS Knobs as approved by Engr-in-Charge |
| 51 | REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01)- |
| 52 | Removing of old unserviceable ply top from existing charpoy and fixing the new 12mm thick BWR commercial plywood (cutting out as per existing on ground from the plywood of size 2100x900mm provided by the dept ), with mild steel galvanised iron nuts and bolts with GI washer, complete including tightening of loose joints with gas welding of existing frame before fixing the ply as per size shown in drg and as directed. |
| 53 | Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Charpoy IP with two coats of synthetic enamel paint of approved shade (Make: Berger/AsianPaint) after giving a primer coat with red oxide and as directed by Engr-in-Charge. |
| 54 | S&F hard PVC shoes of best quality as approved by Engr-in-Charge. |
| 55 | REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220) |
| 56 | Removing of old unserviceable ply top from existing charpoy and fixing the new 12mm thick BWR commercial plywood (cutting out as per exixting on ground from the plywood of size 2100x900mm provided by the dept ), with mild steel Screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer, all as per specified and as directed. |
| 57 | M&L dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed. |
| 58 | M&L dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 8.02 to the required size for short rail including threading at both ends complete all as specified and directed . |
| 59 | Removing of Old unserviceable legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 8.03 here-in-before by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge. |
| 60 | Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit. |
| 61 | Supply and fixing flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with long rail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit. |
| 62 | M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32 mm bore pipe complete all as specified and directed . |
| 63 | S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make complete all as specified and directed . |
| 64 | S&F 3mm thick base MS circular plates of 55mm dia duly painted to the legs as directed by Engr - in - Charge. |
| 65 | REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) : |
| 66 | Removing of old unserviceable ply top from existing bed and fixing the new 12mm thick BWR commercial plywood (cutting out as per exixting on ground from the plywood of size 2100x900mm provided by the dept), with appropriate size of SS nuts & bolts with washers after tightening of frame by welding, shape and size as per drg and as directed. |
| 67 | REPAIR TO HEAD BOARD : Removing of unserviceable board of head rest and S&F new board of Head rest to be made of 18 mm thick Ext grade Prelaminated MDF board of approved shade duly covered with PVC beading 2 mm thick all around (Make : Action Tesa/Novapan/Green Pannel Max) of size with suitable Screws with the cleats as specified on drg and as directed by Engineer-in-Charge. |
| 68 | REPAIR TO FOOT BOARD :All as per Srl item No. 9.02 but for foot board. |
| 69 | M&L, scraping of existing coat of paints complete filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge. |
| 70 | S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge. |
| 71 | CHARPOY FOLDING IP WITH HARD TOP |
| 72 | S&F in replacement of unserviceable top of Charpoy Folding to be made of 12 mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked in two pieces and to be fixed with appropriate sizes of SS nuts & bolts with washers without having any joints after tightening of frame . Make : Kit Ply/Green Ply/Century Ply shape and size as per drg and as directed by Engr-in-Charge. |
| 73 | Removing of old unserviceable Components of charpoy folding and S&F new with MS pipe of 25 mm bore with wall thickness 1.6mm by welding/Reveting and including minor repair/welding complete directed by the Engineer-in-Charge. |
| 74 | S&F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified. |
| 75 | M&L, scraping of existing coat of paints complete filling, finishing and painting with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge. |
| 76 | Chair Revoving Executive/ Computer with Arms(TP/(FD/E6/MAP/12) |
| 77 | Labour for removing the U/S caster wheel and S & F new twin caster wheel to chair revolving/executive/Computer including welding wherever required to match with the original complete all as directed by Engr-in-Charge. |
| 78 | Labour for removing old height adjustment mechanism of chair revolving/executive/computer and S&F new height adjustment mechanism including greasing complete all as specified and directed by Engineer-in-Charge. |
| 79 | Labour for removing old broken/ damaged rod of chair revolving/executive/computer and S&F new rod all as specified and directed by Engineer-in-Charge. |
| 80 | Labour for removing the torned/deshaped foam leather/ cloth tapestry/Mesh for seat and back of chair revolving high back / executive and S & F new rexine/cloth tapestry/Mesh cover with foam cushion of required thickness of approved quality to match the original complete all as specified and directed. |
| 81 | Labour for removing the torned/deshaped foam leather/ cloth tapestry/Mesh and cushion for seat and back of chair revolving/computer chair Med & low back/Chair Visitor and S & F new foam cushion of required thickness and rexine/cloth tapestry/Mesh cover of approved quality to match the original complete all as specified and directed. |
| 82 | Labour for removing unserviceable hydraulic gas lift and S/F new hydraulic gas lift to chair revolving /executive/computer /chair Med & low back including welding wherever required to match the original complete all as specified and as directed. |
| 83 | Labour for removing u/s ABS of chair revolving /executive/computer /chair Med & low back and S&F new ABS of approved quality as Specified and directed by Engr-In-Charge. |
| 84 | Labour for removing unserviceable wheel base and S/F new wheel base of steel (including twin castor wheels) with 5 arms to chair revolving /executive/computer /chair Med & low back including welding wherever required to match the original complete all as specified anbd as directed. |
| 85 | S&F new moulded cushioned Seat & Back complete with12 mm thick Hot pressed Plywood and duly upholstered(Both together as one Set) for chair revolving Executive/High Back to match the original complete all as specified and directed |
| 86 | Labour for removing old/broken handles and S & F new handles complete in pairs for chair revolving /executive/computer /chair Med & low back to match the original complete all as specified and as directed. |
| 87 | REPAIR TO CHAIR WRITING/CHAIR VISITORS (FD/E6/MAP/12)/TP |
| 88 | Labour for removing the existing worn out/ unserviceable seat of chair Writing and S & F new seat frame of size 500x450mm made from 12 mm thick Hot pressed Plywood with moulded polyurethane Foam 50mm thick with density 50-55 Kg per cubic Mtr, duly upholstered with fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge. |
| 89 | All as per Sl. No. 12.01 but for Back of Chair Writing of size 500x450mm |
| 90 | Labour for removing the existing worn out/ unserviceable seat cover of chair and S & F new foam cushion of required thickness and seat cover of size 500x450mm made from fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding all as directed by Engineer-in-Charge. |
| 91 | All as per Sl. No. 12.03 but for Back of Chair Writing of size 500x450mm |
| 92 | S&F Rubber Stoppers of appropriate size with MS screws |
| 93 | S&F iron strip joining seat and back as per existing shape and size with suitable nuts and bolts as directed by Engr-in-Charge. |
| 94 | Removing of unserviceable arms in any position, S&F new arms with nuts and bolts as per drg as directed by Engr-in-Charge. |
| 95 | S&F new base plate duly black painted of existing shape and size of arms as directed by Engr-in-charge. |
| 96 | Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed by the Engr-in-Charge. |
| 97 | CHAIR CBA STEEL W/ARMS (FD-75) |
| 98 | Labour for removing the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made from commercial plywood 12 mm thick and 50 mm thick 40 D foam cushion, duly covered with cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge. |
| 99 | All as per Sl. No. 13.01 but for Back of Chair CBA Steel of size 460x380mm |
| 100 | M&L for welding with 25 x 3.0 mm MS flat iron 510 mm long with holes to fix screws to seat/back frame for fixing seat/back frame including screws complete all as specified and as directed for Chair CBA Steel (FD 75 (M) |
| 101 | S&F new PVC Caps. |
| 102 | S&F new IInd class hard wood/PVC arms as per sample. |
| 103 | Labour for removing the existing worn out/ unserviceable seat of chair CBA steel and S&F wooden seats of IInd class hard wood duly caned (Godrej pattern) and polished for chair CBA Steel |
| 104 | Labour for removing the existing worn out/ unserviceable Back of chair CBA steel and S&F wooden back of IInd class hard wood duly caned (Godrej pattern) and polished for chair CBA Steel |
| 105 | Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed by the Engr-in-Charge. |
| 106 | CHAIR CB STEEL W/O ARMS (FD-75) |
| 107 | Labour for removing the existing worn out/ unserviceable seat of chair CB steel and S&F wooden seats of IInd class hard wood duly caned (Godrej pattern) and polished for chair CB steel. |
| 108 | Labour for removing the existing worn out/ unserviceable seat of chair CB steel anf S&F wooden back of IInd class hard wood duly caned (Godrej pattern) and polished for chair CB steel. |
| 109 | S&F MS flat iron 25 x 3 mm duly welded to seat/Back frame of chair CB/CBA steel for fixing seat/back frame including screws complete all as specified and as directed by the Engineer-in-Charge. |
| 110 | S&F new PVC Caps. |
| 111 | Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed by the Engr-in-Charge. |
| 112 | Labour for cleaning, mild grinding and preparation of old treated wooden surfaces of any description,filling of cracks with putty including tightening of loose joints if any and applying two coats of french polish for the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site) |
| 113 | Sofa set 5 seater FD - 281/373/258 |
| 114 | Sofa set seater single chair ( FD-281/373/258) |
| 115 | Chair Easy Cushioned |
| 116 | Chair Dining Offrs |
| 117 | Dressing Mirror Gents |
| 118 | Table dressing Ladies Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender