Tender For Special Repair To Bldg No- T-58 (Otm) Of Mb Area Sig Coy, Provn Of Washroom At Bldg No T-15 (Cssp) Jak, Provn Of Grill From The Inside The Building In Jco/Or Grocery Section, Provn Of Weather Shelter For Guards At Hoshiyar Singh Gate, Prov
Tender Value
47.73 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
19 days left
EMD
95500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No- T-58 (Otm) Of Mb Area Sig Coy, Provn Of Washroom At Bldg No T-15 (Cssp) Jak, Provn Of Grill From The Inside The Building In Jco/Or Grocery Section, Provn Of Weather Shelter For Guards At Hoshiyar Singh Gate, Provn Of Interlocking Tiles And Shed Near Offrs Section Entrance And Provn Of Gates In Children Park At Manekshaw Enclave Of Age B/R-I Under Ge(P) No 1 Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Dismantling Plain or corrugated steel/AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in dense soil complete all as specified and directed. |
| 4 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 5 | M&L for Machine cut kota stone slab flooring 18-20mm thick over 25mmcement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 6 | M&L for Kota stone slab 15-18mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm in CM 10mm and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 7 | M&L for Cement concrete in foundation, filling and mass concrete type C-2 1:3:6 (using 40 mm graded aggregate) complete all as specified and directed. |
| 8 | M & L for cement concrete in foundations, filling and masss concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed. |
| 9 | M&L for RCC (design mix M-25) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.Note:Note:- Reinforcement shall be measured and paid separately under respective item. |
| 10 | M&L for Cement concrete 75mm type C-2 1:3:6 as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 11 | Dismantling Plain or corrugated fiber sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 12 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed/framed work complete all as specified and directed |
| 13 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each complete all as specified and directed. |
| 14 | ~ditto~ all as per item No 13 above but exc 1.50 Sqm n.exc 4 Sqm complete all as specified and directed. |
| 15 | M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:4. complete all as specified and directed. |
| 16 | M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. |
| 17 | M&L for Brick work with sub class B-bricks straight or curved on plan exc 6m mean radius built in CM (1:6) using old size bricks complete all as specified and directed. |
| 18 | M&L for Brickwork with fly ash bricks or brick tiles in brickon- edge walls (less than ½ brick thick),built in 1:6 cement mortar, complete all as specified and directed. |
| 19 | M & L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6, complete all as specified and directed. |
| 20 | M&L for 15mm thick rendering on any faces of stone, concrete or brick work in CM 1:4 surface finished even and fair complete all as specified and as directed. |
| 21 | M&L for rendering 5mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces or ceiling finished even and smooth with out using extra cement. complete all as specified and directed. |
| 22 | M&L for 15 mm thick rendering in cement mortar (1:3) on brick / concrete/ stone surfaces mixed with water proofing compound as per manufacturer instruction , finished even and smooth using extra cement complete all as specified and as directed. |
| 23 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed. |
| 24 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of Cement plaster 1:6, rendering is to be finished even or smooth (without using extra lime or cement complete all as specified and directed. |
| 25 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 26 | M&L for Providing, cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping, Hold fast complete all as specified and directed. |
| 27 | M&L for Granite(of any type)tiles 16 to 18 mm thick as in any position and similar works over 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete all as specified and directed. |
| 28 | M&L for Machine cut cudappah stone slab 20-25mm thick horizontal/ vertical partion over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 29 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 30 | S&F Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over an including 20mm thick screed in CM(1:6) complete all as specified and directed. |
| 31 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over an including screed bed of bedding layer of thickness 15 mm, as specified and directed. |
| 32 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed. |
| 33 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed. |
| 34 | M&L for vetrified paver ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 35 | S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed. |
| 36 | S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, fixed with eye hole and good quality lense all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified . |
| 37 | S&F for wire gauge i.e. panel will be wire gauge in liew of double side prelam PVC sheet panel the wire gauge shell be wrapped on a additional square 8 mm solid tube and the tube shell be welded tomMS tube the wire gauge shell be stretched to tighten firmly Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 38 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 40 | S&F SS butt hinges100mm long medium weight, cold rolled complete all as specified and directed. |
| 41 | S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed type C-21 complete all as specified and directed. |
| 42 | S&F 200 mm long extruded SS handles, fabricated type complete all as specified and directed. |
| 43 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed. |
| 44 | S&F 300mm SS sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 45 | S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 46 | S&F 200mm long SS barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 47 | S&F 100mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 48 | S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 49 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 50 | S&F Aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide 4 to 6 nos glass incl 5mm grosted glass complete all as specified and directed. |
| 51 | S&F 4.00 mm thick sheet glass ordinary quality and glazing complete in square nexc 0.50sqm each complete all as specified and directed. |
| 52 | M&L for 5 mm frosted glass, selected quality and glazing with oil putty for louvers etc. in squares 0.5 sq. m in each pane complete all as specified and directed. |
| 53 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters/frame of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 54 | S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 55 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 56 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 57 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 58 | S& F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 59 | S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 60 | M&L for in repair suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24 mm X 0.8 mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2 mm X 22.2 mm X 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed. |
| 61 | Excavating in trenches in any type of soil , n exc 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soil complete all as specified and as directed. |
| 62 | Use and waste formwork to surface of concrete of roof slab or similar work complete all as specified and directed. |
| 63 | Returning filling in incl spreading levelling watering and well rammmed in layers n exc 25cm complete all as specified and directed. |
| 64 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.50m for soil complete all as specified and directed. |
| 65 | M&L for moorum/red bajri filling in floors or paving laid in layers n. exc 15 cm thick spreading levelled and blinded with earth and rammed including watering complete all as specified and directed. |
| 66 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes for 150 mm bore SWG pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 67 | Supplying, laying and jointing for 150-160mm nominal dia DWC pipes class SN-4 conforing to IS -16098:2013 Part-I stiffness with and incl necessary jointing materials complete all as specified and directed. |
| 68 | S & F in repair vitreous casecade type single piece/suit including dual flush type white PVC connection complete fixed and making good to floor, complete all as specified and directed |
| 69 | M&L for Vitreous China bowl urinal flat back, white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe incl CP spreader, complete all as specified and directed. |
| 70 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated complete all as specified .Make- Parryware C022O or eqv Prayag/Hindware complete all as specified and directed. |
| 71 | S&F Vitreous china WHB (oval type) 550x400mm, fixing flat back or an le back type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed. |
| 72 | S&F Vitreous china WHB (oval type/Rectangular/square) size 480x480mm min fixing table top or with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed.(Make-OPS-WHT-15901N of Jaquar, Kohler, Roka) |
| 73 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests , white, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated complete all as specified and directed. |
| 74 | S&F in repair 10 litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete all as specified and directed. |
| 75 | S&F in repair brass chromium plated overhead shower 125mm size (squar/rectangular) with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed. |
| 76 | S&F in repair oval type counter top Wash hand basin 550x400mm vitreous china (white) including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified. |
| 77 | S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 78 | S&F for in repairs 15mm angle cock/stop cock chromium plated,cast copper alloy, and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed. |
| 79 | S&F in repair Brass Chromium plated oval basin mixer/ WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe in sink and WHB mixer etc. complete all as specified and directed . (Make/ sample approved by GE) Jaquar (FLP-9119PM) or equivalent of Kohler, Roca |
| 80 | S &F maze hand shower 25 x 38mm oval shape single flow ABS body and face shape plate crome plated with rubit cleaning system complete all as specified and directed.Cat HSH 49537 Jaquar or equivalent to Kohlar or Roca |
| 81 | S & F maze hand shower 75mm cylindrical shape multi flow (rain, massage & mist), chrome plated with rubit cleaning system. complete all as specified and directed.Cat HSH 1797 Jaquar or equivalent to Kohlar or Roca |
| 82 | S&F 15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors,wall incl cutting chasing and making good complete all as specified and directed. |
| 83 | S&F 20 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors,wall complete all as specified and directed. |
| 84 | S&F 25 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors,wall complete all as specified and directed. |
| 85 | S&F in rep 25mm PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brassv ferrule and fixed complete all as specified and directed. |
| 86 | S&F in repair Gun-metal,25mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 87 | S&F in repair Gun-metal, 20mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 88 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. |
| 89 | S&F Chromium plated SS toilet paper holder including fixing arrangement complete all as specified and directed. |
| 90 | S&F Chromium plated SS soap dish including fixing arrangement complete all as specified and directed. |
| 91 | S & F liquid soap container of PTMT fixed with incl chromium plated brass screw and wooden /plastic cleat complete all as specified and directed. |
| 92 | S&F in repairs PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed. |
| 93 | S&F 15mm dia pillar taps, cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 94 | M&L in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 95 | S&F in repair for toughned glass as in door partition aurimatic door and similar works 12 mm thick fixed in shutters fixing with two 300mm Stainless Steel handle including double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty incl SS lock heavy duty monogram/ eatching/ writing letter etc complete all as specified and directed. |
| 96 | S&F for 5 mm thick mirror of selected quality glass, mounted on 5mm thick PVC Fibre sheet including decorative beading , fixed to plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 97 | S&F 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 98 | M&L for 150 mm, ordinary rat tail rod/capsule rod pattern springs made of brass including roller and roller plate complete all as specified and directed. |
| 99 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified. |
| 100 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed. |
| 101 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 102 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius complete all as specified and directed. |
| 103 | S&F 110mm bore PVC (SWR) cowl any radius complete all as specified and directed. |
| 104 | S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed |
| 105 | S&F in repair 75 mm dia PVC (SWR ) bends and radius complete all as specified. |
| 106 | S&F in repair 75mm PVC (SWR) junction single, (Single T) equal or unequal with or without access door complete all as specified and directed |
| 107 | M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed. |
| 108 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 109 | M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. complete all as specified and directed. |
| 110 | S & F welded steel wire fabric fixed to steel frame weight Nexc 4 Kg per Sqm complete all as specified and directed.Note weight of chain link fencing shall be asetain by BOO |
| 111 | M&L 15 mm thick cement plaster in CM 1:6 on internal surfaces of fair faces of brick work or concrete surfaces with finished surfaces even and smooth with out using extra cement all as specified and directed. |
| 112 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) washable, antifungal having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work/old surfaces of wall/ceilingas per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and pattern directed. |
| 113 | Material & Labour for applying Two or more coats of 100% on new/ old surfaces of wall/fascia etc Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces as per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint (upto 5 storey) complete all as specified and directed. |
| 114 | M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust etc by skilled labour as per following steps:-(1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute.(2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified and directed |
| 115 | S & F PVC water tank Rotational moulded polyethylene water storage tanks 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position incl. 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 116 | S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed. |
| 117 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required. complete all as specified and pattern directed. |
| 118 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using late vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 119 | M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 25cm deep and getting out on hard and dence soil complete all as specified and directed |
| 120 | M&L for Complete removal of existing treatment of wall/ceiling complete all as specified and directed |
| 121 | S&F in repair SS curtain rails 20mm dia fixing with brackets, stops, rollers end knob lattu etc. complete all as specified and directed. |
| 122 | S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed. |
| 123 | S&F brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed. |
| 124 | S&F brass chromium plated towel ring 20mm dia, round type, fixed with CP brass screws including wooden/plastic beads complete all as specified and directed. |
| 125 | S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete all as specified and directed. |
| 126 | M&L for Providing factory made precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg)as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds complete all as specified and directed. |
| 127 | M&L Precast (factory made frame and cover)cement concrete Type B-1 1:2:4 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and as directed. |
| 128 | M&L for PCC (1:2:4) type B2, (using 20 mm graded stone aggregate), as in foundations / mass concrete/ levelling course complete all as specified and directed. |
| 129 | S&F TMT steel bars 6mm to 8mm dia. and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 130 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 131 | Fixing only in repair chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 132 | Supply only chain link fencing, , any width and dia of wire not less than 3.00 mm complete all as specified and directed. |
| 133 | M&L in repair Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed. |
| 134 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to factory store and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 135 | M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metallic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including min 1 mm thick sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc and cutting grooves on the wall surface incl making good disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for light and fan points complete all as specified and directed. |
| 136 | (a) One light point/fan point controlled by one switch. complete all as specified and directed. |
| 137 | (b) One switch socket combination out let 5 Amps on independent board. complete all as specified and directed. |
| 138 | (C) One socket out let 5 Amps on the same board with other switches. complete all as specified and directed. |
| 139 | ~ditto~ All as per item No 135 above but with 2.5 sqmm PVC insulated multi stranded copper conductor and 2.5 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board complete all as specified and directed. |
| 140 | Supply & Fixing Modular type Switch single pole 16 Amps one way complete all as specified and directed. |
| 141 | Supply & Fixing Modular type socket out let 2 in 1, 6/16 Amps complete all as specified and directed. |
| 142 | Supply & Fixing Modular type Socket out let 5 Amps complete all as specified and directed. |
| 143 | Supply and fixing Fan step type electronic Regulator modular type, 120 watts, 230 Volt complete all as specified and directed. |
| 144 | Supply & Fixing Modular type Switch single pole 5 Amps one way complete all as specified and directed. |
| 145 | Supply and Fixing Ceiling Rose Surface PVC type 65 x 50 mm two to three terminals complete all as specified and directed. |
| 146 | Taking down ceiling fan/Exhaust Fan, any type/size, after disconecking sealing cable end, dismantling blades and removing fan and blades to factory store. complete all as specified and directed. |
| 147 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of complete all as specified and directed. |
| 148 | Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed. |
| 149 | M&L Maintenance and checking of ceiling fan/exhaust fan of any size/type/make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting/hanging in original position, reconnecting the electric cables and testing complete, all as directed. |
| 150 | S & F LED light fitting 1x9W/1X10Wbulkhead Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 151 | Supply and fixing in repair Security lighting luminaire for use with LED lamps, of capacity not less than 35/36 Watts IP-65, 230 Volts, with high quality lenses & reflector, High grade aluminium pressure Die-Cast Housing with toughened glass cover, IP-65 class of protection, complete with control gear and all accessories fixed with 25/40 mm bore medium grade GI Pipe Bracket 1.5 mtr long bent to shape, fixed on wall with MS Flat Clamps, nuts & Bolts as required complete all as specified. |
| 152 | Supply and fixing in replacement Smart bright Batten Series, LED luminaire using LEDs 22/20 watt, natural white, 2200 Lumen, with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 153 | Supply and fixing in replacement Smart bright Batten Series, LED luminaire using LEDs 10 watt, natural white, 1000 Lumen, with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 154 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 155 | Taking down Old unserviceable DB/Switch fuses complete with all accessories, any type/capacity complete, after disconnecting cable connection, and remove to factory store. complete all as specified and directed. |
| 156 | S&F in replacement of sheet steel enclosure distribution boards, double door factory made VTPN 4 way 3 phase 415 volts with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits comprising of 3 phase 4 wire of suitable rating incl MCCB, four pole,63 Amp, 415 Volt, of breaking capacity 16KA Complete all as specified and directed. |
| 157 | Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 12 way, SPN, double door type, 240 Volt with suitable amps rated busbar complete all as specified and directed.(Note : MCBs will be Measured separately) |
| 158 | Supply and Fixing MCB, SPN, 230 Volt of capacity 6- 32 Amps, 10 KA 'C' series complete all as specified and directed. |
| 159 | Supply and Fixing MCB, SP, 230 Volt of capacity upto 6-32 Amps, 10 KA 'C' series complete all as specified and directed. |
| 160 | M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLSH , cable with copper conductor of size 6 Sq mm in and including/drawing through rigid non metallic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth. complete all as specified and directed.(Note :- 2x 6 Sq mm conductor cable, 1 x 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length) |
| 161 | M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLSH, cable with copper conductor of size4 Sq mm in and including/drawing through rigid non metallic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 4 Sqmm connected common earth. complete all as specified and directed.(Note :- 2x 4 Sq mm conductor cable, 1 x 4 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length) |
| 162 | Taking down sub main wiring any size of two single core aluminium/ copper conductor cable PVC insulated alongwith/ without conduit and accessories and removing from site, making good the disturbed surfaces of wall and floor/ ceiling etc, complete all as specified and directed. |
| 163 | Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on complete all as specified and directed. Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. |
| 164 | Taking down old unserviceable cable of any size complete all as specified and directed. |
| 165 | Supply and laying & testing and commissioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed. |
| 166 | (c) 4 Core X 25 Sqmm | Rm | |
| 167 | Supply and laying sand cushioning with dry and clean washed sand over and under the under ground cable in trenches, ducts for cable protection 150 mm below & 80 mm above the cable as protection of cable complete as specified and directed. Note : Punned thickness of sand shall be measured & paid. |
| 168 | Supplying and laying unreinforced precast concrete cable cover, class LV Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed. |
| 169 | Supplying and laying DCWP pipe OD 50 mm , ID 38 mm complete all as specified and directed by Engr in charge. |
| 170 | Schedule of credit of Amount Rs.35,598.00 to be deducted during AOC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender