Tender For Addition/ Alteration And Special Repair Of Basket Ball Court Including Wall Finishers In Pm Shri Kendriya Vidyalaya No - 02 Vasco. (Tender Id No. 2026_Mes_786366_1)
Tender Value
42.22 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration And Special Repair Of Basket Ball Court Including Wall Finishers In Pm Shri Kendriya Vidyalaya No - 02 Vasco. (Tender Id No. 2026_Mes_786366_1)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing complete all as specified and as directed. |
| 2 | Dismantling MS Basket Ball Poles with fiber glass board & rings (fixed) Poles made of 6” pipe 2.2 mt projection with fiber glass acrylic boards rings & net and height as per international standards. |
| 3 | M&L for Hardcore of guage n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and as directed by Engr-in-charge. |
| 4 | M&L for Cement concrete (1:4:8), type D-2, 75mm thick, using 40mm graded stone aggregate as in sub base in flooring/hard standing complete all as specified and directed by Engr-in-charge. |
| 5 | M&L for Plastic dividing strips to prevent cracks 38mm wide and 1.5mm thick inserted in position and conform to design complete all as specified. |
| 6 | M&L for PCC 1:2:4 type B1 (20mm graded aggregate) 50mm thick finished fair & even in flooring/hard standing and finishing the cement concrete surface even and smooth without using extra cement including necessary formwork complete all as specified & directed. |
| 7 | Excavating in soft/disintegrated rock in post holes (or similar) each n exc 0.5 cum getting out return filling in and ramming earth or broken rubble mixed with each around in layers n exc 25 cm watering and removing surplus soil to a distance exc 50m and making good surface. |
| 8 | M&L for Cement concrete type C2 1:3:6 (40mm graded aggregate) in foundations, filling and mass concrete in walls or retaining walls, any thickness, size or shape incl pilasters, butressses column, pillars, boundary pillars and posts ( incl caps and bases) all as directed by Engr-in-charge. |
| 9 | S&F post and struts in fencing incl cutting tops to shape as directed, drilling holes, notcing for wire, wind ties etc including flat iron fillets 40 mm wide and 4mm thick (for securing wire mesh etc) incl all necessay drilling, bolting or riveting, etc and similar work conforming to Fe290 Gde E-165 complete all as specified and directed by Engr-in-charge. |
| 10 | M&L for preparation of new steel surface exc 10 cm width or grith and applying two coat of synthetic enamel paint on steel surfaces over a coat of red oxide all as specified and directed by Engineer -in-charge |
| 11 | Excavation in trenches not exc 1.5 m in depth and not exc 1.5 m wide in soft/disintegrated rock for foundation and getting out & Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point completed all as specified and directed by Engr-in-charge |
| 12 | Returning, filling in, including spreading, levelling, watering and well ramming in layersnot exc 25 cm. completed all as specified and directed by Engr-in-charge |
| 13 | M&L for precast cement concrete block masonary of 1:3:6 type C1 with solid blocks exc 10cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 14 | M&L for rendering 5mm thick in CM 1:4 with WPC over a coat of 10mm thick in CM 1:6 on fair faces of brick or concrete surface of wall finished even and smooth without using extra cement complete all as specified and as directed. |
| 15 | Supply only Liquid water proofing compound |
| 16 | M & L for applying two coats of Advanced Anti-algal weather/ Damp proof 100% acrylic smooth emulsion with silicon additive, over a coat of fiber reinforced elastomeric liquid water proofing membrane ( Anti fungal paint) on new plasterd surface wall/ ceiling and corners including preparation of surface by brooming down or steel wire brushing scrapping down with steel scrapper smoke soot mould moss and effloroscent salts brading oil and greasing spots etc and making proper surface wherever required complete all as manufacturer instructions. ( Manufacture by Asians Paints Smart Care Damp proof + Apex Ultima or equivalent make)Note: The application of paint to be done by the authorized applicator of Asian paints or eqivalent make and contractor shall submit a written guarantee with the authorized dealer of 6 years of any type of colour fading, flaking, peeling, growth of fungus, seepage of water through the paint applied area or any other damged to the paint. Also the dealer shall appoint a person to inspect and validate the application of the system in sag wise manner. |
| 17 | Supply only 4mm thick MS galvanised chain link fencing of square mesh of size 100mm complete all as specified and directed by Engr-in-charge. |
| 18 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm long and dia of shank 5 to 10 mm complete all as specified and directed by Engr-in-charge. |
| 19 | Fixing only chain link fencing fixed to any type of post including line wires of any type of standard rails, straining bolts etc including provision of binding wire complete all as specified and directed by Engr-in-charge.Note: Standard rail & straining bolts shall be measured and paid separately. |
| 20 | M&L mild steel TMT bars 10mm dia as in tie for chainlink fencing cut to length, bend to shape required complete all as specified and directed by Engr-in-charge. |
| 21 | M&L for preparation of new surfaces of any description over 10cm in width or girth and applying one coat of black bituminous paint on steel surfaces over a coat of red oxide all as specified and directed by Engineer -in-charge |
| 22 | S&F Basket Ball Poles of mild steel black pipe with fiber glass board & rings (Portable & Moveable Wheels, height adjustable, jack type) Poles made of 6” pipe 2.2 mt projection with fiber glass acrylic boards rings & net and height as per international standards. |
| 23 | M&L for Synthetic flooring including surface preparation for outdoor Basketball court of (09 layers).Specification of Basket Ball Synthetic Court:1. Primer - 01 layer2. Resurfacer - 01 layer3. Acrylic fine Cushion - 04 layers4. Base coat - 01 layer5. Top coat paint - 01 layer6. Line marking - 01 layerNote:- (i) The Manufacturer/authorised dealer shall appoint a technically qualified representative during complete application.(ii) Surface preparation - Opening out visible hairline cracks and surface cleaning by water and brush and then filling cracks with crack fillers(iii) Application of fine layer cushioning is to be done at specified inerval as per manufacturer instructions.(iv) The application of paint to be done by the authorized applicator of anyy approved make and contractor shall produce guarantee for 02(two years) of any type of color fading, flaking, peeling, growth of fungus, seepage of water through the paint applied area or any other damage to the paint. |
| 24 | Taking down cement plaster of any description on brick or stone walls including racking ouit joint hacking for key, scrubbing down with water etc. |
| 25 | Rendering 5mm thick on ceiling in cement mortar 1:3 finished even and smooth without using extra cement. |
| 26 | Rendering 10 mm thick on wall in cement mortar 1:6 on stone/masnory surfaces finished even and smooth without using extra cement. |
| 27 | Rendering 15mm thick plaster in cement mortar 1:4 in two coats (10 mm thick backing coat + 5mm thick finishing coat) finished even and smooth without using extra cement including water proofing compound (Dr. fixit LW or equivalent 200ML per bag of cement) etc complete all as specified and directed. |
| 28 | M&L for taking down loose and damaged concrete cement plaster from soffit of ceiling floor/slab, vertical surfaces of column beams,slab etc incl exposing and removing rust from reinforcement by rubbing with wire brush and plenty of water so as to remove the loose particles,dust,laitance etc. and removal of debris to a distance n.exc 50m and deposited where directed. |
| 29 | M&L for preparation of surface by application of rust remover on exposed reinforcement using rust remover of approved make, apply passivator coat using zinc primer /anti corrossive paint of approved make on reinforcement Bars. Apply bond coat using \\"Epoxy bonding agent\\" on entire surface, when bond coat becomes tacky apply repair mortar (using universal polymerised repair mortars single pack like Pagel U40 or Microconcrete) in layers of 15mm and subsequently built up the required thickness (45mm) in subsequent layers of 15mm and finishing the final layer even and smooth as per manufacturers instruction and as directed. Make : M/s Pidilite Industrues Ltd or Eqult in/ asian paints/STP Ltd.Note: Application to be done by authorised applicators only. |
| 30 | Supply only welded steel wire fabric weight n exc 2 kg per sqm all as specified and as directed. |
| 31 | M&L TMT steel bars 6 to 8mm dia, cut to length, bent to shape reqd and welded to existing reinforcement of any description and any position of RCC structure after binding with mld steel wire annealed n less than 0.9 mm dia s an addl bar complete all directed. |
| 32 | M& L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 33 | M&L for 3mm thick wall care putty on wall surfaces |
| 34 | Preparing newly plastered surface of ceiling and applying two coats of oil bond distemper over a coat of alkali resistant primer. |
| 35 | Preparing newly plastered surfaces of wall and applying two coats of OBD over a coat of alkali resisant primer |
| 36 | M&L for complete removal of existing treatment and applying two coat of OBD over alkali resistant priming coat on ceiling |
| 37 | M&L for preparation of old painted surfaces of wall and applying one coat of synthetic enemal paint over plastered surfaces |
| 38 | Supply only Liquid water proofing compound all as specified. |
| 39 | M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint as per direction of engineer in charge. |
| 40 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (Ist quality) |
| 41 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide primer |
| 42 | M & L for applying two coats of Advanced Anti-algal weather/ Damp proof 100% acrylic smooth emulsion with silicon additive, over a coat of fiber reinforced elastomeric liquid water proofing membrane ( Anti fungal paint) on old plasterd surface wall/ ceiling and corners including preparation of surface by completly removing old paint/treatment from surfaces and making proper surface wherever required complete all as manufacturer instructions. ( Manufacture by Asians Paints Smart Care Damp proof + Apex Ultima or equivalent make)Note: The application of paint to be done by the authorized applicator of Asian paints or eqivalent make and contractor shall submit a written guarantee with the authorized dealer of 6 years of any type of colour fading, flaking, peeling, growth of fungus, seepage of water through the paint applied area or any other damged to the paint. Also the dealer shall appoint a person to inspect and validate the application of the system in sag wise manner. |
| 43 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 44 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.complete all as specified and as directed. |
| 45 | M&L sand filling under floors or in foundation including watering and consolidation including spreading levelling in layers n.exc 25 cm thick for Paver blocks complete all as specified and as directed. |
| 46 | M&L Machine pressed precast conctete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement no pigment complete all as specified and as directed. |
| 47 | M&L coloured chequered cement concrete tiles 20cm x 20cmx 25mm thick set, jointed and pointed in neat cement slurry with grey cement no pigment as in floors/pavings including screed bed 20mm thick CM 1:6 complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender