Tender For Comprehensive Maintenance And Misc Works Of Building At Dhq-11 And Trv Under Ge (I) (Cg) Goa
Tender Value
15 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
5 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance And Misc Works Of Building At Dhq-11 And Trv Under Ge (I) (Cg) Goa
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or PCC solid block masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 2 | Dismantling of Stone slabs and interlocking tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed. |
| 3 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 4 | Taking down cement plaster, any description on brick balls or on concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc and removing same from the sites complete all as specified and as directed. |
| 5 | Material and labour for precast cement concrete block masonry with solid blocks made out of PCC 1:3:6, type C-1 with using 20mm graded stone aggregate, exceeding 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed. |
| 6 | Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, plastered surfaces finishing fair and even including on walls complete all as specified and as directed. |
| 7 | Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces plastered surfaces finishing fair and even complete on walls surface with using of water proofing compound or chemical complete on walls surface complete all as specified and as directed. |
| 8 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including 1.5 mm wall care putty complete all as specified and as directed. |
| 9 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 square metre over and including priming coat of exterior primer applied @ 0.90 litre/ 10 square metre over new surfaces complete all as specified and as directed. |
| 10 | Material and labour for plain cement concrete 1:4:8, type D-2, using 40mm graded stone aggregate as in 100mm thick sub base complete all as specified and as directed. |
| 11 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and Pigment complete all as specified and as directed. |
| 12 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 13 | Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed |
| 14 | Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 square metre but not exceeding. 0.18 square metre as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. |
| 15 | Material and labour for glazed ceramic colour tiles (300x200) x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 16 | Material and labour for 20mm thick granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 17 | Material and labour for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to mortar faces of brick or stone surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | Taking up or down old 15mm tubing and connections, including cleaning for re fixing or removal to store (Walls, ceiling, floors, etc.) complete all as specified and as directed. |
| 19 | Supply and lay of 20 mm dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including all necessary fittings required for fixing complete all as specified and as directed. |
| 20 | CPVC 20 mm dia pipe |
| 21 | CPVC Brass Elbow 20 MM |
| 22 | CPVC Brass Tee 20 MM |
| 23 | CPVC Brass tank adaptor 20 MM |
| 24 | CPVC Brass union 20 MM |
| 25 | CPVC Brass ball valve 20 MM |
| 26 | Supply and fix ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed FLOAT VALVE 20 MM complete all as specified and as directed. |
| 27 | Supply and fix in repairs stop valves, cast copper alloy fancy type chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed. |
| 28 | Supply and fix in repairs bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15 mm bore complete all as specified and as directed. |
| 29 | Supply and fix in repairs Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe of 15 mm bore complete all as specified and as directed. |
| 30 | Supply and fix in repairs 15mm dia, 450 mm long PVC connection with brass ferrules on both ends complete all as specified and as directed. |
| 31 | Supply and fix in repairs 15mm dia, 600 mm long PVC connection with brass ferrules on both ends complete all as specified and as directed. |
| 32 | Supply and fix in repairs plastic water closet seat cover, black, closed pattern with flat bottom suitable for pedestal / semi pedestal pattern water closets and mild steel chromium plated or aluminized hinging device complete all as specified and as directed. |
| 33 | Supply and fix in repair health faucet (ABS Body) l chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 34 | Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 35 | Supply and fix in repairs door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 36 | Supply and fix in repairs PVC low level flushing cistern white 10 litres capacity and connections to pipes complete all as specified and as directed. |
| 37 | Supply and fix in repairs 125mm dia brass chromium plated shower rose with swivel joints fancy type suitable for 15mm bore GI pipe complete all as specified and as directed. |
| 38 | Material and labour for fixed in repair of 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 39 | Supply and fix soap dish, any type, fixed to plugs with chromium plated brass screwscted complete all as specified and as directed. |
| 40 | Supply and fix in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, urinals etc. complete all as specified and as directed. |
| 41 | Supply and fix in repairs MS chromium plated grating 125mm dia suitable for nahani trap complete all as specified and as directed. |
| 42 | Supply and fix in repairs 600 mm x 450 mm mirror of selected quality glass, mounted on 6mm thick. AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 43 | Supply and fix in repair wash basins vitreous china flat back size 550x400 mm white excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 44 | Supply and fix in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, ashers and wastes; including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 45 | Supply and fix in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 46 | Supply and fix in repairs brass chromium plated Brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 47 | Supply and fix in repairs brass chromium plated mixing valve suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and as directed. |
| 48 | Supply and fix in repair vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern including all necessary accessories like rag bolts/ gel gasket flush pipe complete all as specified and as directed. |
| 49 | Supply and fix in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including flushing cistern flush pipe and waste pipe complete all as specified and as directed. |
| 50 | Supply and fix in repair vitreous china suating pan, \\"Orissa pattern\\" size 580x440mm white with integral foot rest (excluding flushing cistern and flushing pipe) and connection with existing pipes etc complete all as specified and as directed. |
| 51 | Supply and fix in repair 15 mm dia gun-metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed in repair complete all as specified and as directed. |
| 52 | Supply and fix in repair 20 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed in repair complete all as specified and as directed. |
| 53 | Supply and fix in repair PVC (SWR) pipes rain water pipe single socketed, in any length , with rubber rings 110mm dia complete all as specified and as directed. |
| 54 | Supply and fix in repair PVC (SWR) pipes, rain water pipe double socketed, in any length, with rubber rings 110mm dia complete all as specified and as directed. |
| 55 | Supply and fix PVC rotational moulded polythene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I of size 500 litres capacity including taking down of existing tank complete all as specified and as directed. |
| 56 | Supply and fix PVC rotational moulded polythene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I of size 1000 litres capacity including taking down of existing tank complete all as specified and as directed. |
| 57 | Dismantling of wrought iron or mild steel work any description complete all as specified and as directed. |
| 58 | Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes framed guard bars; barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work complete all as specified and as directed. |
| 59 | Material and labour for steel tubes medium grade of 100mm Internal dia of 3.5 mm thick of galvanised with all fitting and fixed complete to post complete all as specified and as directed. |
| 60 | Supply and fix plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment FE -410W (Grade -E-250) Quality B complete all as specified and as directed. |
| 61 | Supply and fix rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe-290 (Grade E- 165) complete all as specified and as directed. |
| 62 | Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers an one hexagonal or square nut not exceeding 5cm long of 5 to 10mm diameter shank in mm complete all as specified and as directed. |
| 63 | Material and labour for applying two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer to new steel surface not otherwise described over 10cm width or girth including preparation of new surface complete all as specified and as directed. |
| 64 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 square metre each complete all as specified and as directed. |
| 65 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) above but exceeding 1.5 square metre but not exceeding 4 square metre each complete all as specified and as directed. |
| 66 | Supply and fix 2nd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 67 | Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Part-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed. |
| 68 | Supply and fix 35mm thick 2nd class hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain chamfered or rounded and mitred beads for securing glass etc the size of member of shutter as specified in SSR Part-I clause 8.24 (a) complete all as specified and as directed. |
| 69 | Supply and fix fibre glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fibre glass from all sides.M.S stay shall be provided at the bottom to steady the frame complete all as specified and as directed. |
| 70 | Supply and fix 30 mm thick glass fibre reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames, complete all as specified and as directed. |
| 71 | Supply and fix powder coated aluminium frame for doors, windows, ventilators (including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 72 | Supply and fix powder coated anodised aluminium glass louver /ventilators with blades of 10mm heavy duty with lever handle etc. complete all as specified and as directed.(Note- Glass shall be measured and paid separately) |
| 73 | Supply and fix in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed. |
| 74 | Supply and fix 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 square metre in each pane including hacking out old broken glass from metal frame complete all as specified and as directed. |
| 75 | Supply and fix 12mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape drilling holes required complete all as specified and as directed. |
| 76 | Supply and fix 4mm thick frosted glass ordinary quality glazing with oil putty in square not exceeding 0.5 square metre in each pane fixed to wooden frame complete all as specified and as directed. |
| 77 | Supply and fix only 50 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 78 | Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 79 | Supply and fix 75 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 80 | Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 81 | Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 82 | Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 83 | Supply and fix 150mm size extruded aluminium alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. |
| 84 | Supply and fix 100mm size extruded aluminium alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. |
| 85 | Supply and fix 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and as directed. |
| 86 | Material and labour for applying two coats of synthetic enamel paint over a coat of primer on wooden surface any description over 10cm width or girth including preparation of old surfaces complete all as specified and as directed. |
| 87 | Material and labour for one coat of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and as directed. |
| 88 | Supply and fix in repairs mortice locks brass vertical type size 100mm 4 levers brass chromium plated with keys in duplicate complete all as specified and as directed. |
| 89 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed. |
| 90 | Material and labour for pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as specified complete all as specified and as directed. |
| 91 | Material and labour for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed. |
| 92 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 93 | Supply and fix hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. |
| 94 | Material and labour for aluminium anodised snap grid frame work for false ceiling all as specified size of grid 605mmx605mm complete all as specified and as directed. |
| 95 | Material and labour for providing and fixing 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Note : Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender