Tender For Supply And Construction Of 01 X Helipad 75 M X 35 M At Ferozepur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Sep 2026
13 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Construction Of 01 X Helipad 75 M X 35 M At Ferozepur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: 113 ENGINEER REGIMENT Name of Work : Supply and Construction of 01 x Helipad 75 M x 35 M at Ferozepur Contract No: 4194/OT/Helipad/26-27 OF 2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SlNo Item Description Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Rough excavation n exc 1.50 m deep and getting out in soft/loose soil and removing the excess soil upto 150mtr away and spreade and leveled in low laying area or as directed. |
| 3 | Rolling and consolidating fmn surfaces in cutting with exc 8 to 12 tonne power roller to achieve compaction 95-98.5% of maximum dry density. |
| 4 | Supply and laying for 300 mm thick Granular Sub Base (GSB) compacted thickness (two layers of 150 mm thick) Grade V, spreading, rolling and levelling and rolling with 8 - 10 Tonne power roller complete all as specified directed. |
| 5 | Material and labour for Wet Mix Macadam (WMM) 150 mm thick compacted thickness spreading, rolling and levelling in two layers of 75 mm and rolling with 8 - 10 Tonne power roller. |
| 6 | Providing and laying Dry Lean Concrete (DLC) 150 mm thick having compresive strength. Minimum cement content must not be less than 140 Kg/Cum including spreding, levelling and rolling with 8 to 10 Tonne power roller. |
| 7 | Supply Sand Cushioning for laying of polythene sheet levelling, complete spreading, levelling 10 mm thick complete all as specified. |
| 8 | Supply & laying 400 micron thick HDPE sheet (Virgin Quality) having minium weight 390 Gm/Sqm over sand cuhioning for separation complete all as specified and directed |
| 9 | Material & laying 225 mm thick Pavement Quality Concrete (PQC) of minimum field flexural strength of 4.50 Mpa. As per IRC 44 only OPC grade cement must be used in PQC mixed with non - circular synthetic fibre (as per generic specification given by E-in-C's Br) by mechanical means at hte rate of 0.25% by weight of cement per Cum of PQC. Curing should be done by mechanical eqipment. Texturing - cum - curing machine (TCM) including finishing opf surface complete all as specified and directed. |
| 10 | Material and labour Marking lines, dashes, `H' symbols as required size and shape, arrows, letters etc. on concrete pavement and the like of any width with using thermoplastic compound white paint hot applied 2 mm thick including glass with thermostat machine confirming to BS3262 and according to the specification laid down in IRC and most (Ministry of Surface Transport) specifications - 2011 (14th revision) complete all as speecified and directed. |
| 11 | Material and labour for forming construction joints 10 mm wide and 30 mm deep for quality concrete slabs, cutting with diamond cutter to a depth of 30 mm and 10 mm wide to accommodate polythylene rod and sealant 10 mm wide, provision of closed cell polyrthylene rod of 10 mm dia sealed with (10 mm depth minimum above polyethylene rod) Poly urethane sealant complying with BS 5212 & BS 4254 and EN - 141875 - 2003 (for hydrolysis/water resistance test) priming the sides and minimum MAF + 30% (with Ten years performance guarantee) and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing the masking tape after the application of sealant all as specified and directed at site. |
| 12 | Material and labout for forming 20 mm wide epansion joints 210 mm deep for quality concrete slab filled with preformed bitumen joints filler with polyurethane joint sealant for 55 mm depth over provision of closed cell polythylene rod of 22 mm dia sealed with (29 mm depth minimum above polythylene rod) complying with BS 5212 & BS 4254 and EN - 141875 - 2003 (for hydrolysis/water resistance test) priming the sides and minimum MAF 30% (with TEN years performance guarantee) and applying marking tape on edges of joint to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing the masking tape after application of sealant all as specified and directed at site. |
| 13 | Material and labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate in KERB Stone subbase complete all as specified. |
| 14 | Material and labour for Pre Casted Concrete of size 450mmx300mmx125mm, 1:2:4 type B1 using 20mm graded stone aggregate in KERB Stone in cement mortar 1:4 complete all as specified |
| 15 | Preparation of new wall surface of any description over 10cm girth or width, not otherwise described and apply two coats of synthetic enamel paint over a coat of plaster priming complete all as specified and directed. Make : Asian / Berger / Nerolac |
| 16 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting ou in soft/loose soil |
| 17 | M&L Cement concrete in foundations filling and mass concrete type D-2 1:4:8 ( 40 mm graded aggregates ) |
| 18 | M&Lfor brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 |
| 19 | M&L cement conc (1:2:4) type B1 (using 20mm graded stone agg) as in coping etc. including use of form work. |
| 20 | M&L rendering 15mm thick on stone other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth w/o extra cement |
| 21 | M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in surface channels and drains all as specified |
| 22 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. |
| 23 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm soft / loose soil. |
| 24 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point |
| 25 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes: framed guard bars : barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 Gde E -165 |
| 26 | M&L preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome |
| 27 | Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender