Tender For Repair Renovation Of Cfc Building Near Busstand Thuroo Pyt Thuroo A1 Block Thuroo Distt Reasi Under Capex Budget Ddc For The Year 2026-27.
Tender Value
2.43 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
1 days left
EMD
4860
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Renovation Of Cfc Building Near Busstand Thuroo Pyt Thuroo A1 Block Thuroo Distt Reasi Under Capex Budget Ddc For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:1 meter from cutting edge (All kinds of soil) |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:4:8 or richer mix (i/c equivalent design mix) |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforcement for RCC work including straightening , cutting, placing in position and binding all complete with TMT bars |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for ; Suspended floors, roofs, landings, balconies and access platforms. |
| 8 | Edges of slabs and breaks in floors and walls |
| 9 | 12 mm cement plaster to ceiling of mix 1 : 6 (1 cement : 6 fine sand) |
| 10 | Providing and fixing PVC wall panelling over existing plastered surface with high quality PVC panel complete with all fittings like cleats nails screw etc. The rate inclusive wastage, labour and other necessary fitting complete in all respect. |
| 11 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 12 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws second class kail wood |
| 13 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 14 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides. |
| 15 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including all leads, lift and carriage complete |
| 17 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 18 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces including all leads, lift and carriage complete |
| 19 | Providing and placing on terrace (at all floor levels) polyethylene storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and verflow pipes including fittings and the base support for tank including all leads, lift and carriage complete |
| 20 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 21 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 2 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia. nominal bore |
| 23 | Providing and fixing on wall face un-plasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. Single socketed pipes 110mm diametre |
| 24 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board510x1040mm bowl depth 250mm |
| 25 | Providing and fixing of Geyser of approved brand like Usha, Cromptum, Luminous, etc. |
| 26 | Electrification to rooms along with verandah with wiring, including MCB, Main supplyboard, modular switches, modular socket, led light, modular switch board including supply wire from pole to supply point(complete job) as per instruction of engineer in charge. |
| 27 | Providing and fixing of ceiling fans of approved brand like Usha, Cromptum, Luminous, etc. |
| 28 | Supply and Installation of Custom glass panel/wooden/brass/Institutional Honour Board complete in all respects as directed by the Engineer in Charge. |
| 29 | Supply and Professionally installing premium grade, scratch-resistant Blackout/One-way Mirror privacy film on existing office glass partition mirrors/panels. |
| 30 | Construction of CIB (includes concrete pedestal/brick size 3'x2' plastering, painting all complete job as per direction of engineer in charge |
| 31 | Carriage of Cement from an avg. distance of 29 K.M by MT & 100 metres by AT |
| 32 | Carriage of sand from an avg. distance of 29 K.M by MT & 100 metres by AT |
| 33 | Carriage of Aggregate below 40mm from an avg.distance of 29 K.M by MT & 100 metres by AT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender