Tender For Development Of Workshop And Washing Station At Jammu Tawi Golf Course Sidhra, Jammu. (Under Capex Budge 2026-27).
Tender Value
7 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
4 days left
EMD
14000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Workshop And Washing Station At Jammu Tawi Golf Course Sidhra, Jammu. (Under Capex Budge 2026-27).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : |
| 6 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for: Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 8 | Foundations, footings, bases for columns |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 10 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 11 | Providing and fixing color coated profile sheet 0.50 mm TCT (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both top 8 at side of12ster) the1 (Rofing microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and also cutting to size and shapewherever required. |
| 12 | CPVC PIPES AND FITTINGS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 13 | 15mm nominal outer dia pipes. |
| 14 | 20mm nominal outer dia pipes. |
| 15 | External work including trenching, refilling etc. 32mm nominal outer dia pipes. |
| 16 | Providing and fixing brass stop cock of approved quality. |
| 17 | 15 mm nominal bore |
| 18 | 20 mm nominal bore |
| 19 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 20 | 20 mm nominal bore |
| 21 | 25 mm nominal bore |
| 22 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 23 | Carriage of material by Mechanical Transport including loading/unloading and stacking at site complete. |
| 24 | Sand average lead of 10.00 Kms |
| 25 | Stone aggregate Below 40 mm size for average lead of 10.00 Kms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender