Tender For Renovation And Upgradation Of Dsco Building At Karipora Budgam.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
1 days left
EMD
30000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Upgradation Of Dsco Building At Karipora Budgam.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 meters lead, for thickness of tiles 10 mm to 25 mm. |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge in 1:3:6 or richer mix (I/C equivalent design mix). |
| 3 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 50 mm thick with 20 mm nominal size stone aggregate finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. |
| 4 | Providing and laying Vitrified tiles, size of tile 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S:15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. |
| 5 | Providing and laying Vitrified tiles in floor, size of tile 600x600 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles of size conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Providing and fixing in wall lining of 18 mm thick HDHMR board (approved make such as Action TESA, Century, Greenpanel or equivalent) conforming to relevant IS standards with necessary fixing arrangement and screws etc. complete including fixing of diffrent type of decorative beedings and cornice to be fixed on profile work on HDHMR board in patern and design strictly as per direction of Engineer-in-Charge with arctlic putty wall matt finish with DEECO paint two or more coats to give an even shade including cost of all frame work, pvc pipes, conduits, etc. involved. |
| 8 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications; two or more coats applied @ 1.25 liter/10 sqm over and including one coat of special primer applied @ 0.75 liter /10 sqm. |
| 9 | Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi models etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. |
| 10 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 11 | Providing and fixing 12 mm thick plain panelling of Russian Wood (Rait Wood) including base work and cornice with necessary screws, priming coat etc., complete. |
| 12 | Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.50 sqm per liter per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. |
| 13 | 12 mm Cement plaster of mix 1 : 4 (1 cement : 4 coarse sand). |
| 14 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood including the cost of frame work, complete. |
| 15 | Providing and fixing 19 mm thick waterproof wooden almirah including necessary hinges, handles and 1 mm thick Teak/Mica for outer surface, two coat paint for inner surface as directed by Engineer-in-Charge. |
| 16 | French spirit polishing, two or more coats on new works including a coat of wood filler. |
| 17 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z-sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion; anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15). |
| 18 | Providing and fixing 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-Charge. |
| 19 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 20 | Providing Furniture and Furnishings for the office , complete in all respects , as per approved specifications and requirements including supply, transportation, installation, placement and all incidental charges as per directions of EIC. |
| 21 | Providing and fixing of PVC waste pipes including all fitting and fixture items viz. collar, bend, etc. complete job. |
| 22 | 75 mm |
| 23 | 110 mm |
| 24 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 25 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 26 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete. |
| 27 | Providing and fixing CP Brass toilet paper holder. |
| 28 | Providing and fixing PTMT Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms for Wash basin and sink. |
| 29 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of nthe same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 30 | Providing and fixing G.I. pipes 20 mm dia. Nominal bore complete with G.I. fittings and clamps, including cutting and making good the walls etc.; concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. |
| 31 | Providing & fixing White vitreous china water closet squatting pan (Indian type) Orissa pattern W.C Pan of size 580x440 mm along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material I/C malba, all complete as per the direction of Engineer-in charge. |
| 32 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 33 | Providing and fixing PTMT towel rail 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. |
| 34 | Manufacturing supplying and fixing retro reflective overhead informatory road signage boards made up of 2 mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC:67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300 mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 35 | Providing and fixing of Roller blnds over Heavy-Duty Aluminium Tube Smooth Corder Chain Multi-Layered Textured Linen or Polyester Material with Thermal Backing Non-Toxic, VOC Free Material. |
| 36 | For Window Size 2.25 m x 1.50 m |
| 37 | For Window Size 1.50 m x 1.50 m |
| 38 | For Window Size 1.00 m x 0.85 m |
| 39 | Carriage of materials from source to site of work including loading unloading complete by Mechanical Transport. |
| 40 | Stone aggregates from Lasjan for an average Lead of 20 kms. |
| 41 | Sand from Pampore for an average Lead of 25 kms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender