Housing Urban and Rular Development Local Bodies Closing in 5 days TDR #57198816

Tender For Fencing And Construction of Additional One Room At Sheep Centre Binner -A Scheme: Adp(Pri) 2026-2027 ,Block Nadihal

Issued by Local Bodies · Baramulla, Jammu and Kashmir
Tender Value
14.90 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
5 days left
EMD
29800
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Fencing And Construction of Additional One Room At Sheep Centre Binner -A Scheme: Adp(Pri) 2026-2027 ,Block Nadihal

BOQ

Name of Work:- Fencing and C/O Additional one Room at sheep centre Binner -A Scheme: ADP(PRI) 2026-2027 ,Block Nadihal
Sl. No. Item Description
1Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: including dewatering if any
2Providing and laying of stone soiling (hand packed )including dressing ramming ,watering and all leads lifts and carriage upto site of work complete (including dewatering if any)
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with (1: 4: 8)mix (1cement :4Coarse sand :8 graded stone aggregates 40mm nominial size )crushed stone aggregates inclding.dewatering if any and head load
4Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:3:6mix (1 Cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) crushed stone aggregates including dewatering if any and head load
5Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level in 1:1.5:3mix (1 Cement :1.5 coarse sand : 3graded stone aggregate 20mm nominal size) crushed stone aggregates including dewatering if any and head load
6Centering and shuttering including strutting, propping etc. and removal of form for;-Suspended floors, roofs, landings, balconies and access platforms
7Lintel, beams, plinth beams, girders, bressumers and cantilevers.
8Centering and shuttering including strutting, propping etc. and removal of form for;-Foundations, footings, bases of columns etc. for mass concrete.
9Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement in 1:1.5:3 mix (1 Cement :1.5 coarse sand : 3graded stone aggregate 20mm nominal size) crushed stone aggregates including Head load if any
10Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level Mild steel and medium tensile steel bars.
1112mm Cement plaster on the rough side of single or half brick wall ofmix1:6mix ( 1 cement : 6 fine sand )
12Supplying and filling of Khak bajri/GSB /nallah muck in under floor including ramming and watering with all carriages upto site of work
13Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)
14Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
15Painting with synthetic enamel paint of approved brand and manufacture one or more coats on new work
16Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on new work
17Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer
18Painting with waterproof excel of approved brand and manufacture of required colour two or more coats on walls to give an even shade.
19Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported KD WOOD
20Providing and fixing panelled or panelled and glazed shutters for doors, windows and celerestory windows including ISI mark black enamelled butt hinges with necessary screws incl panelling of door shutters and glazing of windows KD WOOD
21Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge of K.D wood
22Providing and fixing of 30 mm thick panelled or panelled and glazed shutters for door with M.S butt hinges and necessary screws including panells of 12mm thick laminated board of K.D wood
23P/F of glass pans 3.5mm thick including cost of beading and nails
24Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on cement bed in 1:4 mix including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 mm x 600 mm
25Chequered Tiles for steps rubber moulded for steps
26P/F of Aluminium Hardware fittings incluidng cost of necessary screws
27A) Handles 100 mm
28B ) T bolt 150 mm
29C ) Concieled locks
30Structural steel work weldded in built up sections,in trusses .purlins etc i/c cutting , hoisting , fixing in position and applying a priming coat of approved steel primer all complete.
31Providing high rib coloured sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.50 mm thick
32Providing ridges or hips of width 45cm overall width plain coloured sheetsfixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.0.50 mm thick
33Structural steel work weldded in built up fixing in position .In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc..and applying a priming coat of approved steel primer all complete.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc..
34Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size).
35P/F of lighting points as well as lighting circiut incl. point wiring through conduits with1.5 Sqmm Multi Standard copper wire of approved make for light, fan points etccomplete in all respects.
36P/F of heating points as well as heating circiut incl. point wiring through conduits with4 Sqmm Multi Standard copper wire of approved make for heating points etccomplete in all respects.
37P/f of 1200mm sweep ceiling fan of approved qulaity and make incl. cost of fandimmer and M.S hooks (if required) complete (USHA, Havells or eq.make)
38P/F of LED lights 9 Watt of Standard quality of approved make, phillips, syska or equivalent.
39Part B Fencing
40Demolishing stone rubble masonry/Brick masonary manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: a)stone masonary
41b)brick masonary
42Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil including dewatering if any
43Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand)
44Labour charge for available stone quantity
45Providing and laying of stone soiling (hand packed )including dressing plums in concrete
46Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:3:6mix (1 Cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) crushed stone aggregates including dewatering if any and head load
47Centering and shuttering including strutting, propping etc. and removal of form for;-Foundations, footings, bases of columns etc. for mass concrete.
4812mm Cement plaster of mix 1: 6 ( 1 cement : 6 coarse sand )
49Painting with synthetic enamel paint of approved brand and manufacture two or more coats on new work
50Structural steel work weldded in single sections i/c cutting , hoisting , fixing in position and welding framed work and applying a priming coat of approved steel primer
51Brick work with FPS brick of class designation 75 in superstructure in 1:6 mix with all carraiges
52Extra for brick work in superstructure above plinth level upto floor v level
53Labour charge for available brick quantity
54Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level Mild steel and medium tensile steel bars.
55Providing & laying coping 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
56Painting with waterproof excel of approved brand and manufacture of required colour two or more coats on walls to give an even shade.
57Carriage of material by mechanical transport Bricks from Budgam for avg lead 70 km upto site of work
58Sand agg lead (5Km)
59stone agg lead (10Km)
60Providing CIB and during execution & post execution photographs complete job Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57198816
AUTHORITY Local Bodies
TENDER VALUE 14.90 Lakhs
LAST DATE 08-09-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Fencing And Construction of Additional One Room At Sheep Centre Binner -A Scheme: Adp(Pri) 2026-2027 ,Block Nadihal
Basic Detail
Tender No 207/Xen/Rew/Bla/2026-27 Dated 25/08/2026
Bidding Type Tender
Location
City Baramulla
State Jammu and Kashmir
Key Dates
Publish Date 25 Aug 2026
Submission Date 08 Sep 2026
Open Date 09 Sep 2026
Finance
Tender Value 14.90 Lakhs
Tender Fee 600
EMD 29800
Exemption Not Available
Document List
8b4ed592-1bf2-4ca7-8e56-ff06713bb062.html
BOQ_1079924.xls
Tendernotice_1 (12).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 25, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Sep 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

8b4ed592-1bf2-4ca7-8e56-ff06713bb062.html

xls

BOQ_1079924.xls

pdf

Tendernotice_1 (12).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders