Bids Are invited for Operation Ot Table - Height Adjustment , Lateral Tilt , Trendelenburg & Reverse Trendelenburg , Flex & Reflex , Back Up/Down Movement , Longitudinal Shift , 0 Position , It Should Have Electro - Hydraulic Base Locking Feature. ,
Tender Overview
Project Description
Bids Are invited for Operation Ot Table - Height Adjustment , Lateral Tilt , Trendelenburg & Reverse Trendelenburg , Flex & Reflex , Back Up/Down Movement , Longitudinal Shift , 0 Position , It Should Have Electro - Hydraulic Base Locking Feature. , Base Cover Made Of Rugged Glass Fiber Reinforced Laminate/ Stainless Steel,Resistant To Impact, Breakage And Disinfectants,Dark Colored Dyed Throughout With Additional Scratch-Proof Enamel Finish. , Entire Table Top Frame And Column Cladding Should Be Made Of Stainless Steel To Avoid Rusting. , Special Double Layer Soft Padding With Latex Free Bi-Elastic Cover , Fixed With Velcro Straps On Plastic Carrier Plates, Radio Translucent. , Patient Orientation Should Be Possible On Both Sides Of The Table Top. , Minimum Loading Capacity Should Be 250Kg At Any Position. , The Table Top Is Fully Free Without Transverse Shadows On X-Ray Images And It Does Not Cast Shadows That Obstruct C-Arm Images. , The Clarity Of The C-Arm Image Should Not Be Compromised Due To Quality Of Table. , The Table Top Should Be Stable Throughout The Procedure To Ensure Patient Safety. , Special-Design, Maintenance-Free Rechargeable Batteries With Capacity For About A Weeks Use/Minimum 20 Operations On Single Charge,In The Operating Room. , Recharging Of The Batteries And Supply Of The Operating Table By Means Of Mains Cord. , Nominal Mains Voltage : 230-240V Ac Via A Mains Cord , Mains Frequency , 50/60Hz. , Electrical Safety Confirms To The Standards For Electrical Safety Iec 60601- 1 General Requirements And Iec 60601-2-46 For Particular Requirement For Ot Table.Shall Meet Internationally Recognized Iec 60601-1-2 For Electromagnetic Compatibility (Emc) And Electromagnetic Interference (Emi) , Height Without Padding : 650 - 950Mm Or Better , Trendelenburge / Reverse Trendelenburg: +25°/25° Or Better , Lateral Tilt , Both Directions : 15° Or Better , Back Plate Up/Down :75° / -35° Or Better , Flex / Reflex
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Height adjustment | Height adjustment |
| 2 | Lateral tilt | Lateral tilt |
| 3 | Trendelenburg & Reverse trendelenburg | Trendelenburg & Reverse trendelenburg |
| 4 | Flex & Reflex | Flex & Reflex |
| 5 | Back up/down movement | Back up/down movement |
| 6 | Longitudinal shift | Longitudinal shift |
| 7 | '0' Position | '0' Position |
| 8 | It should have electro - hydraulic base locking feature. | It should have electro - hydraulic base locking feature. |
| 9 | Base cover made of rugged glass fiber reinforced laminate/ stainless steel,resistant to impact, breakage and disinfectants,dark colored dyed throughout with additional scratch-proof enamel finish. | Base cover made of rugged glass fiber reinforced laminate/ stainless steel,resistant to impact, breakage and disinfectants,dark colored dyed throughout with additional scratch-proof enamel finish. |
| 10 | Entire table top frame and column cladding should be made of stainless steel to avoid rusting. | Entire table top frame and column cladding should be made of stainless steel to avoid rusting. |
| 11 | Special double layer soft padding with latex free bi-elastic cover , fixed with velcro straps on plastic carrier plates, radio translucent. | Special double layer soft padding with latex free bi-elastic cover , fixed with velcro straps on plastic carrier plates, radio translucent. |
| 12 | Patient orientation should be possible on both sides of the table top. | Patient orientation should be possible on both sides of the table top. |
| 13 | Minimum loading capacity should be 250Kg at any position. | Minimum loading capacity should be 250Kg at any position. |
| 14 | The table top is fully free without transverse shadows on X-ray images and it does not cast shadows that obstruct C-arm images. | The table top is fully free without transverse shadows on X-ray images and it does not cast shadows that obstruct C-arm images. |
| 15 | The clarity of the C-arm image should not be compromised due to quality of table. | The clarity of the C-arm image should not be compromised due to quality of table. |
| 16 | The table top should be stable throughout the procedure to ensure patient safety. | The table top should be stable throughout the procedure to ensure patient safety. |
| 17 | Special-design, maintenance-free rechargeable batteries with capacity for about a week's use/Minimum 20 Operations on single charge,in the operating room. | Special-design, maintenance-free rechargeable batteries with capacity for about a week's use/Minimum 20 Operations on single charge,in the operating room. |
| 18 | Recharging of the batteries and supply of the operating table by means of mains cord. | Recharging of the batteries and supply of the operating table by means of mains cord. |
| 19 | Nominal mains voltage : 230-240V AC via a mains cord | Nominal mains voltage : 230-240V AC via a mains cord |
| 20 | Mains frequency , 50/60HZ. | Mains frequency , 50/60HZ. |
| 21 | Electrical safety confirms to the standards for electrical safety IEC 60601- 1 General requirements and IEC 60601-2-46 for particular requirement for OT Table.Shall meet internationally recognized IEC 60601-1-2 for Electromagnetic Compatibility (EMC) and Electromagnetic Interference (EMI) | Electrical safety confirms to the standards for electrical safety IEC 60601- 1 General requirements and IEC 60601-2-46 for particular requirement for OT Table.Shall meet internationally recognized IEC 60601-1-2 for Electromagnetic Compatibility (EMC) and Electromagnetic Interference (EMI) |
| 22 | Height without padding : 650 - 950mm or better | Height without padding : 650 - 950mm or better |
| 23 | Trendelenburge / Reverse Trendelenburg: +25°/25° or better | Trendelenburge / Reverse Trendelenburg: +25°/25° or better |
| 24 | Lateral Tilt , both directions : 15° or better | Lateral Tilt , both directions : 15° or better |
| 25 | Back plate UP/Down :75° / -35° or better | Back plate UP/Down :75° / -35° or better |
| 26 | Flex / Reflex | Flex / Reflex |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender