Bids Are invited for Portable Ultrasound And Color Doppler System - Beam Former : Full Digital Beam Former , Imaging Modes , Composite Modes: B/M, B/Pw, B/Cw, B/Cfm/M, B/Cfm/Pw (Duplex/Triplex Mode) , Image Depth: System Should Have Depth Upto 30Cm O

Sharing tender

Bids Are invited for Portable Ultrasound And Color Doppler System - Beam Former : Full Digital Beam Former , Imaging Modes , Composite Modes: B/M, B/Pw, B/Cw, B/Cfm/M, B/Cfm/Pw (Duplex/Triplex Mode) , Image Depth: System Should Have Depth Upto 30Cm Or More , Transducer Characteristics , Applications , Monitor Type: Digital High Resolution , Monitor Size: Minimum 15 Inch Or More , Dynamic Range: System Should Have Minimum Dynamic Range Of Approx Upto 180Db Or More , Probe Connectors: , Battery: System Should Have Minimum 60 Min Inbuilt Battery Back Up , Weight : System Should Weight Maximum 15 Kgs , Cine Loop Frames: Upto 250 To 300 Frames Review , Memory Storage: The System Should Be Capable To Have Memroy Storage Of 256 Gb Internal Or External. , Zoom: The System Should Have Zoom On Real Time & Frozen Images. , General Measurement & Calculations For B, M & Doppler Modes , Tissue Harmonic Imaging- Thi: Must Be Available On All Probes To Improve Contrast Resolution & Reduces Image Artifacts In Obese Or Difficult Patients. , Speckle Reduction Imaging: Machine Must Have Facility Of Speckle Reduction (Noise & Artifacts) Imaging Technique As Standard. , Special Compound Imaging Technique With Linear Probes: Machine Must Have Facility Of Compound / Cross Beam Tecghnique To Reduce Artifacts, Shadow And Speeckle For Best Visualization Of Linear Probes Imaging. , Doppler Functions: User Selectable Parameters For Prf, Wall Filters, S Le Size, Velocity, Frequency, Angle Corrections, Dynamic Range , Real Time Doppler Measurements: Ri & Pi Real Time Measurement Must Be Possible. , Doppler Audio: Audio Output With Speakers , Color Flow Mapping: User Selectable Parameters For Prf,Color Filters, Velocity (Mean, Velocity / Variance, Variance & Intensity Etc. Maps) Variable Cfm Box, Color Processing. , Tissue Doppler Imaging : Should Be Provided , Simultaneous Mode: B + (B With Cfm In One Image), Both Must Be Lvie At A Time For Better Evaluation. , Archiving Facility , Measurement & Calculation Any Computer: Measurements Must Be Possible On Frozen Images During Live Study. , Very High Frequency Imaging Facility: Machine Must Have Capability To Support Very High Frequency Imaging 18 Mhz Or More. , Trolley: The Machine Should Be Supplied With Trolley Of Same Make. , Thermal Printer: The Machine Should Be Supplied With Thermal Printer , Probes To Be Supplied With Machine , System Should Be Upgradable For Tee Probe Compatibility , Please Specify For Additional Probes Supplied Along With The System (As Optional) , Should Perform Preventive Maintenance (2Nos) During Warranty,Amc,Cmc & If Entered Into Amc(Includes Unlimited Breakdown Calls) /Cmc (Which Will Include Spare Replacement, Breakdown Calls). Vendor To Submit Sops For Pms At The Time Of Installation/ Commissioning. This Is Mandatory Requirement. , Performance Certificates Of Iq,Oq,Pq Tests To Be Submitted At The Time Of Installation/Commissioning. , Vendor To Submit The Technical Data Sheet, Brochure Etc As A Tender Document With Reference To The Quoted Make & Model. Please Mention The Reference Page No., Quoted Model Name/Number Against Each Item Etc In These Documents Against Each Technical Specifications In The Compliance. , Vendor To Submit List & Cost Of Consumables/Consumable Spares( I.E.Spares Need To Be Replaced At Regular Intervals, Maybe Quarterly/Half Yearly/Yearly Etc.) If Any. , Please Submit Pre Installation Requirements [Electrical, Hvac, Compressed Air Along With Air Pressure Mentioned), Water Requirement (Ro/Di/Distilled Water With Its Pressure, Flow Rate Per Hour) ; If Any Of The Above Is Essential] , Vendor To Provide Ups With Adequate Capacity, If Required For The Quoted Equipment. If Not Required, Vendor To Mention The Same. , Vendor To Submit Details Of Footprint Size & Weight Of The Quoted Model. , Vendor To Submit Power Consumption. , Demo Of The Quoted Model , Will Be Required If So Desired By The User, After The Opening Of The Technical Bid And Prior To Opening Of Financial Bid. This Is For Technical Evaluation. All Technical Specifications Mentioned Above To Be Mandatorily Shown In The Demo Unit. , Users/Installation List: A List Of Installations Of The Quoted Model With The Address And Contact Numbers To Be Provided. , Predispatch Inspection At Factory Will Be Required If Desired By Authorities. , Should Be Ce/Us Fda/Bis/Icmed Approved. , Vendor Should Provide The User Manual And Service Manual Copy During The Installation Of The Equipment. At The Time Of Installation, Photographs Of The Equipment Must Be Taken To Record The Model Details, Serial Number, And Initial Condition (For Biomedical Use) , Unpacking And Shifting The Consignment To The Installation Site Is To Be Included In The Vendors Scope Of Supply. Bidder/Manufacturer/Authorized Service Provider Should Take Responsibility To Lift /Shift The Consignment From Unloading Site To The Installation Site. Unloading Site Shall Be Stores Department,Tmh If Needed ,Bidder Has To Arrange For The Labours At No Charge To Tmh (Before Submitting The Quotation,Bidders May Visit Tmh. To Know Unloading And Installation Site. , Training: , Local Service Support: Should Have Local Office And Service Support/Service Engineer For Attending The Breakdown Calls. Details To Be Submitted. , Response Time: Should Not Be More Than 06 Hrs From Lodging A Breakdown Complaint On Toll Free Or By Email. , Warranty- 2 Years , Cmc- Cost Per Annum Will Be Considered For All Bidders For 8 Years After Warranty , Penalty Clause: