Tender For special Repair To Road At Md Accn Of Jco/Or In Bhagat Enclave At Ge Babina
Tender Value
1.44 Crore
Estimated cost
Bid Submission
12 Oct 2026
9 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Road At Md Accn Of Jco/Or In Bhagat Enclave At Ge Babina
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Sep-2026 | date | Date | 12-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10 @ 5 kg per 10 sq metre complete all as specified and directed. |
| 2 | M&L for Premix bituminous macadam with using paving bitumen VG-30, as 4 % of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. |
| 3 | M&L for providing bituminous premix asphaltic semi dense concrete (design mix) 30 mm consolidated thickness with 5.5% binder content by weight of total mix, with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and as directed. |
| 4 | M&L for thermo plastic center or edge line marking (reflective type) of 2.0 mm thick of uniform finishing with machine conforming to the required to BS 3262 (Part-I) 1989 read with MoRTH specification of 803 clause 4.2.1 and 4.2.2 on bituminous surface in white / yellow / Red colour and super imposed with glass slam beats conforming to BS 6088 and MoRTH specification 803 clause 4.3.3 including cleaning of surface by removing all dust, dirt, oil grease etc including removing of existing marking with spirit / kerosene / gas burner or mechanically on bituminous surface complete all as specified and directed. |
| 5 | S & F in repairs CAT eye solar reflected type of metal body allow of size 100 x100x20 mm with PAMA striplens reflector of fixed with and including MS studs of suitable size as per manufactures instructions etc completed all as specified and directed. Make : Sinor / Dark Eye / 3M/ Road Knight / Avery Dennison road Sign / Greenlite)euivelent in other make |
| 6 | Supply and Fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx 125mm x25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4 V/ 0.3 watt NI-ed recharchable battary ( 1.2V/ 1600ma) consisting of super bright LED with 10000 to 18000mcd completed as per manufatures instruction etc completed all as specified and directed.Make : Sinor / Dark Eye / 3M/ Road Knight / Avery Dennison road Sign / Greenlite)euivelent in other make |
| 7 | S & F for Convex Mirror 1000mm dia made of PC material provided with suitable MS pipe post of 75mm dia medium grade with 3mtr long , duly powdered coated / painted as per site requirement, clear & definite mirror, image having 130 degree of viewing angle, unbreakable and stronger than glass, including excavation and PCC 1;2:4 using 20 mm graded aggregate (size of post holes = 450mm x 450mm x 600mm ) complete all as specified and directed. Make : Sinor / Dark Eye / 3M / Road Knight / Dension road Sighn / Greenlite |
| 8 | Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed. |
| 9 | Removing excavated soil to a distance not exc 50 m depositing where directed at a level n.exc 1.5m above the starting point. |
| 10 | M/L for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation, filling and mass concrete, levelling course etc.complete all as specified and direted, |
| 11 | Material and labour for providing and laying 80mm thick factory made ISI MARK chamfered edge cement concrete paver block of M-35 grade with aproved colour , design & Pattern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 12 | M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping on side of Path/Hard Standing including necessary form work etc complete all as specified and directed. |
| 13 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand), including making joints with or without grooves ( thickness of joints excet at sharp curve shall not more than 5 mm ), including making drainage opening wherever required complete all as specified and directed. |
| 14 | S & F for stainless steel boards of high intensity reflect i.e single side, sign boards made of hardened ACP sheet 2 mm thick POP riveted to stainless steel rectangular pipe of size 50 x 25 mm frame of size 900 x 1200 mm. frame supported with bolts over 60 mm round 3 mtr long stainless steel pipe of 16 guage with stainless bonded clamps. All stainless steel parts should be polished. Sign boards should be reflective on one side with wide HIP sheet and overlay film of any colour with computer cut letters, sign and border all as specified including excavation, PCC 1: 2:4 using 20mm graded aggregate (size of post hole shall be 450 x 450 x 600mm) and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender