Tender For Repairs To Wpt, Leakage, Seepage, Plinth Protection And Connected B/R Works In Offrs Md Accn At Gorkha Hill, Circle, Map, Gorkha C Under Age B/R-I At Ge Dssc Wellington
Tender Value
25 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
2 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Wpt, Leakage, Seepage, Plinth Protection And Connected B/R Works In Offrs Md Accn At Gorkha Hill, Circle, Map, Gorkha C Under Age B/R-I At Ge Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor & hearth wall tiling including cement motar bedding of any description laid bedded and pointed complete all as specified and as directed. |
| 2 | M&L for non-skid coloured ceramic tiles 7mm thick area of each tiles exeeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed neat cemet slury and pointed in coloured cement to match complete all as specified and as directed. (Notes : Screed bed measured and paid separately) |
| 3 | M&L glazed ceramic coloured tiles (450x350x 7mm) thick on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed neat cemet slury and pointed in coloured cement to match the colouring tile complete all as specified and as directed. (Notes : Plaster shall be measured and paid separately) |
| 4 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, on flooring,skirting all as specified and as directed. |
| 5 | M&L Rendering 10mm thick in cement mortar 1:4 on fair faces of brick/stone or concrete surfaces for backing of dado/skirting complete all as specified and directed |
| 6 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed |
| 7 | Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise spcifically provided etc. exc 15cm thickness (below or above ground level) and removing debris from site complete all as spcified and as directed. |
| 8 | M & L 20mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roofcslab/ floor complete all as specified and directed (liquid water proofing compound are measure seperately) |
| 9 | Material and Labour for cleaning the surface of sunken floor portion of WC, Bathroom etc., with wire brush, washing with hydrochloric acid to remove dust, dirt, oil, grease, loose particles etc., and providing water proofing treatment to sunken floor by applying first layer of slurry of cement @0.488 kg/Sqm mixed with Acrylic based polymer modified cementitious (PMC) composite compound @ 0.253kg/Sqm and second layer of slurry of cement 0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg /Sqm etc complete all as specified and directed. |
| 10 | M&L plain cement concrete type B1 1:2:4 (20mm graded agg) 40 mm thick as in sub base to floor complete all as specified and as directed. |
| 11 | M & L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 12 | M & L for cement concrete in Type B1 1:2:4 (20mm gradede aggregate) for floors,coping in chajja, balcony etc complete all as specified and directed . |
| 13 | Demolition of brick tiles or terracing tiles, single layer on roofs including removal of existing water proofing treatment of any description and removal of debris to out side MD land complete all as specified and as directed. |
| 14 | Material and labour for plain Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregare 40 mm average thickness as in padding concrete for roof treatment, floor/chejjas etc. finished even and fair complete all as specified and directed |
| 15 | M & L 10mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roof slab/ floor complete all as specified and directed (liquid water proofing compound are measure seperately) |
| 16 | M&L water proofing treatment by applying primer @ 0.20kg per sqm, providing and laying 3mm thick APP modified water proofing memebarane weighing not less than 3.6 kg per sqm reinforced with non woven polyester matt weighing not less than 100 gm per sqm having softeninbg point not less than 140º centigrade, longitudinal tensile strength not less than 300 N per sqm tearning strenght of 100n by torch on application including minimum over lapping 10cm on either side and 15cm on ends and applying a coat of bitumen primer @ of 0.20 Kg/Sqm and finishing with bituminious aluminium paint applied @ 0.10 Kg / Sqm and finished all as per manufacture's instruction complete all as specified and directed . Note: The work shall be carried out by authorised applicators of manufacturer. |
| 17 | Dismantling existing tanks exc. 250 lit & n. exc. 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 18 | Dismantling existing tanks exc. 500 lit & n. exc. 1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 19 | M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) plinth protection /pavings finished even and smooth without using extra cement , 75mm thick complete all as specified and as directed |
| 20 | Taking down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and directed . |
| 21 | Taking down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and directed . |
| 22 | Taking down steel tubing and connections, including cleaning for refixing or removal to store of 25 mm bore complete all as specified and directed . |
| 23 | Refixing of old GI steel tubes and connections of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 24 | Refixing of old GI steel tubes and connections of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 25 | S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 15mm bore complete all as specified and directed |
| 26 | S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 20mm bore complete all as specified and directed . |
| 27 | S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 25mm bore complete all as specified and directed . |
| 28 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall complete all as specified and as directed |
| 29 | S&F in repair 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 30 | S&F repair 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 31 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), colour white, closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including taking down complete all as specified and as directed. |
| 32 | S&F in repairs, vitreous china water closet squatting pan orissa pattern, 580 x 440 mm size with integral foot rests, colour white and P-trap including connections to drain (or outgoing pipe), lime concrete bedding complete all as specified and as directed. |
| 33 | S&F in repair PVC valveless, syphonic action type, 10 Ltr capacity, flushing cistern low/high level, white with inlet, ball valve, float and handle including brackets and connections and including taking down complete all as specified and as directed. |
| 34 | S&F in repair wash basins, vitreous china of size 550 x 400 including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, brass bottle trap, 15 mm bore fancy type chromium plated pillar tap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed. |
| 35 | S/F in repairs low density polyethelene pipes (LDFE) of pr. Rating 6 Kgs/Sqm fixed complete to walls 40mm bore complete all as specified and directed . |
| 36 | S/F in repairs seat cover for pedestal pan white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed . |
| 37 | S/F in repairs bib taps cast copper alloy fancy type screwed for iron pipes 15mm chromiuim plated complete all as specified and as directed. |
| 38 | S&F in repairs Bib cock (Two in one) complete all as specified and as directed . |
| 39 | S/F in repairs Pillar taps(long thread) cast copper alloy fancy type 15mm thick long thourght complete all as specified and as directed. |
| 40 | S&F in repairs 15mm bore Stop cock, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 41 | S & F in repairs Over Head Shower of size of approved make, with shower arm complete all as specified and as directed. |
| 42 | Supply and fix in repairs health faucet (hand shower) chromium plated with 1.0metre long easy flex tube 8mm dia with wall hook as per Cat No.ALD-565 of Jaquar or MAC-3050 of Marc or T9961A1 of Parryware or Cat No.BEA-41 of Prayag or equivalent of other specified makes, complete all as specified and as directed. |
| 43 | S&F in repair 15 mm dia bore angle cock chromium plated cast copper alloy fancy decorative type with flange plate including taking down complete all as specified and as directed. |
| 44 | S & F in repairs Basin Mixer without popup waste system with 450 mm long braided houses complete all as specified and directed . |
| 45 | S & F in repairs Wall mixer 3 in 1 system with provision for both hand shower complete with 115 mm long bend pipe, connection legs & wall glange (without hand & overhead shower) complete all as specified and directed . |
| 46 | S&F in repair stainless steel soap dish of size min 100 mm dia or square or rectangular complete complete all as specified and directed . |
| 47 | S & F in repair to chromium plated Toilet paper holder of vitreous china fixed to wall complete all as specified and directed. |
| 48 | S & F in repair 450 mm x 600 mm looking mirror 5.5 mm thick glass, beveled edge finishing includings studs and necessary fittings complete all as specified and directed . |
| 49 | S&F in repair 32mm bore dia of discharge pipe Waste coupling of PTMT (half or full threaded) Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed. |
| 50 | S&F in repairs PVC flexible waste pipe 32 mm dia complete all as specified and as directed. |
| 51 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 52 | S/F In repairs PVC floor multi trap with grating including jointing with solvent cement 75 mm outlet complete all as specified and as directed. |
| 53 | S/F In repairs for removal of old PVC/cast iron floor trap incl wall crossing pipe and fixed with new outlet 75mm pvc (swr) floor trap/ multi trap with stainless steel grating and new wall crossing and filling with pcc 1:2:4 with water proofing compound including matchng with existed tile and joining with outer pipe line with solvent complete all as specified and directed . |
| 54 | S/F In repairs PTMT Grating 100 mm dia outlet complete all as specified and as directed. |
| 55 | S/F In repairs PTMT Grating 125 mm dia with waste hole outlet complete all as specified and as directed. |
| 56 | Taking down CI pipe jointed in cement mortar taking out of wall in upto100 mm dia complete all as specified and directed . |
| 57 | S/F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling complete all as specified and as directed. |
| 58 | S/F(SWR) PVC pipe 75 mm single socketed in any length with ring joints to walls/ceiling complete all as specified and as directed . |
| 59 | S/F PVC (SWR) bends 110 mm bore with access door complete all as specified and as directed. |
| 60 | S/F PVC (SWR) single Y 110 mm bore with access door complete all as specified and as directed. |
| 61 | S/F PVC (SWR) double Y 110 mm bore with access door complete all as specified and as directed. |
| 62 | S/F PVC (SWR) single Y 75 mm bore complete all as specified and as directed. |
| 63 | S/F PVC (SWR) bends 75 mm bore with access door complete all as specified and as directed. |
| 64 | S/F PVC (SWR) double Y 75 mm bore with access door complete all as specified and as directed. |
| 65 | S/F (SWR) T Single socket equal or unequal (Junction Single) 75 mm with access door complete all as specified and as directed. |
| 66 | S/F (SWR) T Single socket equal or unequal (Junction Single) 110 mm complete all as specified and as directed. |
| 67 | S/F PVC(SWR) Vent cowl 110 mm complete all as specified and as directed. |
| 68 | S/F PVC(SWR) Vent cowl 75 mm complete all as specified and as directed |
| 69 | Demolition of brick work / pre cast concrete article / stone masonry built in cement mortar complete all as specified and as directed. |
| 70 | M&L for Precast cement concrete solid building blocks or slabs Type C1(1:3:6) using 20 mm graded aggregate, exc 10 cm thick set in CM 1:6 complete all as specified and as directed. |
| 71 | M&L for TMT bars,10mm dia and over cut to length,bent to shape required,including cranking, bending spirally for hooping for columns,hookingends and binding with mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 72 | M&L for formwork for fair finished flat surfaces of concrete formwork to soffits of suspended slab such as roof,floor slabs,landing and similar work not exceeding 200mm thick including scaffolding complete all as specified and as directed. |
| 73 | M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported in Beams and columns in floors roofs,landing,balconies,canopies,deck slab and in shelves and like complete as specified and as directed. |
| 74 | Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as directed. |
| 75 | M&L for 10 mm thick rendering in cement mortar 1:6 on PCC block masonry or fair faces of brick work surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed. |
| 76 | M&L for 15 mm thick rendering in cement mortar 1:6 on PCC Stone masonry surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed. |
| 77 | M&L for 20 mm thick rendering in cement mortar 1:4 on stone masonry surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly. |
| 78 | M&L for 15 mm thick rendering in cement mortar 1:4 on brick work surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly. |
| 79 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 80 | M&L for rendering to soffit of RCC slab& ceiling , etc. 5 mm thick in cement mortar 1:3 finished even & fair without using extra cement complete all as specified and as directed. |
| 81 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 82 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 83 | M&LPreparation of new surfaces of plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 84 | M&L Preparation of new surfaces of plastered surfaces and applying two coats of white wash on celling complete all as specified and as directed. |
| 85 | M&L for preparation of new surfaces of walls and applying with 3mm thick white putty and making the surface to an even &smooth finish,rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and complete all as specified and as directed and approved. |
| 86 | Taking down Chowkats or frames not exceeding 1.5 Sq.M each (Without taking off shutters from the frames). complete all as specified and directed . |
| 87 | Taking down shutters of any description not exceeding 1.50 Sq. M each complete all as specified and directed. |
| 88 | S&F Solid PVC Door Frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete all as specified and as directed. |
| 89 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm PVC Sheet on back face with wood free EPS complete all as specified and as directed. Make : Sintex or equivalent in Rajashri plastwood/Poly windows/Dura plast extruction |
| 90 | S&F 100mm size Stainless steel butt hinges, fixed with stainless steel hinge pin complete all as specified and as directed. |
| 91 | S&F 150 mm long, PVC Bow handle complete all as specified and as directed. |
| 92 | S&F 100mm long, PVC tower bolt complete all as specified and as directed. |
| 93 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 94 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 95 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 96 | S&F Joist, channel, angle ot tee sections, fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250) quality-A complete all as specified and as directed. |
| 97 | M&L for two coats of synthetic enamel paint over a coat of red oxide, zinc chrome new or previously untreated steel surfaces of any description, over 10 cm in width or girth,not other wise described complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender