Tender For Advertized Rate List /Bill Of Quantity For Construction Of 02Acr At Bms Darveshbagh , Zone Nehalpora Adv.Cost = Rs 25.11 Lacs
Tender Value
25.11 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
12 days left
EMD
50220
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List /Bill Of Quantity For Construction Of 02Acr At Bms Darveshbagh , Zone Nehalpora Adv.Cost = Rs 25.11 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed. |
| 2 | P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | P/L in position cement concrete of specified grade excl. the cost of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 6 | CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).. |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelnes, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor V level excluding cost of centering, shuttering, finishing and reinforcement with (M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.) |
| 8 | Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns etc for |
| 9 | Reinforcement for RCC works including straightening cutting bending placing in position and binding all complete (Thermomechanically Treated Bars) Incl. carraige and head load. |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand). |
| 11 | Formwork ,Centring and shuttering including strutting proping and removal of same for suspended floors, roofs, landings, balconies and acces. |
| 12 | Formwork ,Centring and shuttering including strutting proping and removal ofLintel, beams, plinth beams, girders, bressumers and cantilevers(Floor beam). |
| 13 | Wood work in frames of doors, windows, clerestory and other frames, wrought framed and fixed in position with M.S lugs or with dash fasteners of required dia and length (hold lugs or with dash fasteners shall be paid for separately) imported wood including all carriages(Imported KD wood) |
| 14 | Structural steel welded in built up sections, trusses and frame work, soffits & Eaves Boarding thick etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 15 | Providing and fixing of high rib Sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm dia with bitumen GI limpet washers with GI limpet washers filled with white lead and incl cost of approved steel primer and two coats of paint on overlapping of sheets complete .50 mm thick zinc coated not less than 27.5 gm/sqm . |
| 16 | Providing and fixing of 40x5 mm iron hold fast 40 mm long including embedding the same in cement concrete 1:2:4. |
| 17 | 12mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand). |
| 18 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade incl priming coat of wooden primer.( Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer ) . |
| 20 | P/F panelled or panelled and glazed shutters for doors using Imported KD Wood 30mm including 12 mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked with all leads lifts & carriages. |
| 21 | P/F panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Imported KD Wood 30mm including 3.5mm thick glass panes, hinges, screws etc. |
| 22 | P/f Panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excl. portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick (10-12mm thick non-polished teak)(Imported KD wood)Float glass panes : 4mm+-0.5mm thick glass pane (weighing not less than 10kg/sqm) |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 24 | Providing and fixing of hardware items of approved quality including loading ,unloading and all necessary fittings etc complete job as per directions of engineer incharge Handles 125mm |
| 25 | Handles 100 mm |
| 26 | T Bolt 100x 10mm |
| 27 | T Bolt 100x 10mm |
| 28 | AL drop(L Type rod lock 9\\") |
| 29 | P/F PVC 25mm conduits incl. joints like T,L in slab all complete for laying of electric conductor |
| 30 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 16 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including. rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 31 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 32 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm). |
| 33 | Providing/ installation and commissioning of electric points/ heating points with wire of required dia/thickness as per requirements including switches/LED Bulbs all inclusive with MCB Panel,Switches, sockets Boxes and Service line required wire and of approved quality and make (Philips, Havelles, Anchor) and other required allied necessary accesseries as per directions of Engineer Incharge at site with all carriages involved complete. Lightining Points |
| 34 | Fan Points |
| 35 | Taking of photographs of size 125mm x 100mm Pre Execution, During Execution, and Post Execution to be submitted with bill complete Job. (Geo tagged photographs showing Longitude and latitude) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender