Tender For 1. Construction Of Mini Community Sanitary Complex (Mini Community Sanitary Complex - Type 2) @ Kurubarapalli Near Phc H/O. Kurubarapalli. Estimate Amount: 483000/-
Tender Value
4.83 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
3 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Krishnagiri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 1. Construction Of Mini Community Sanitary Complex (Mini Community Sanitary Complex - Type 2) @ Kurubarapalli Near Phc H/O. Kurubarapalli. Estimate Amount: 483000/-
BOQ
| Sl. No. | Item Description |
| 1 | 1. Construction of Mini CSC (Mini CSC - Type 2) @ Kurubarapalli near PHC H/o. Kurubarapalli. Estimate Amount: 483000/- |
| 2 | Earth work excavation and depositing on bank with in initial lead lift in hard gravelly soil for foundation etc. complete. |
| 3 | Plain Cement concrete 1:4:8 mix using 40mm ISS metal including all cost and conveyance of all materials to site and all labour charges etc complete. |
| 4 | Refilling in foundation and basement with excavated earth in layer of not more than 15cm thick |
| 5 | Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 6 | Supplying and filling with brick jelly 40mm complete complying with standard specification and as directed by the departmental officers |
| 7 | Random Rubble masonry in CM 1:5 foundation and basement including simultaneously flush |
| 8 | Brick work CM 1:5 mix using good country bricks including cost and conveyance of all materials to site and all labour charges etc complete. |
| 9 | Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center |
| 10 | Plinth Beam |
| 11 | Roof Slab |
| 12 | Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 13 | Supplying and Fabrication of steel for RCC works including all cost of cutting bending and tying of steels and kept ready for concrete in position etc., |
| 14 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete] |
| 15 | Plastering with cement 1:5-12mm thick including cost and conveyance of al materials to site and all labour charges etc complete. |
| 16 | Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 17 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressedAnti skid tiles (20mm thick) in CM 1:3, 20mm thick |
| 18 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 19 | Plastering with cement mortar 1:4mix to 20 mm thick includingcost and conveyance of all materials to site and all labour |
| 20 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. |
| 21 | Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc., complete as per standard specification. |
| 22 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 23 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with crushed stone M.Sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone M.Sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 24 | Europeon Water Closet with all fittings and 10lit capacity flusing tank |
| 25 | Cost and supply of Wood plastic Composit door &Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. |
| 26 | Wood plastic composit door rate as per model communicated, Door D1 0.75 m x 2.10 m |
| 27 | Door SD 1.20 m x 2.10 m |
| 28 | Sanitary arrangements |
| 29 | 110 mm dia pvc pipe |
| 30 | 110mm PVC Door Bend |
| 31 | 110 mm dia pvc pipe |
| 32 | 110mm PVC TEE |
| 33 | Water Supply arrangements |
| 34 | 2000 lit HDPE tank |
| 35 | 32mm PVC Pipe |
| 36 | 32mm PVC Bend |
| 37 | 32mm PVC Tee |
| 38 | Brass Chromium Plated Screw Down Tap 15 / 12mmdia (Heavy Type) |
| 39 | Steel Ventilator (0.60x0.45) |
| 40 | Hand rail for EWC |
| 41 | Supplying and fixing in position of G.I. Pipe Hand Rails 40mm Hand rail |
| 42 | ELECTRICAL ARRANGEMENTS |
| 43 | concealed Light point SD 25 |
| 44 | concealed plug poin SD 12 |
| 45 | CFL SD80 |
| 46 | Service Connection SD 68 |
| 47 | Service Pipe SD 73 |
| 48 | Provision for RWHS including pipes & specials etc., all complete |
| 49 | Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. |
| 50 | Collection and supply of sand filling into the basement including cost and conveyance to the site and all labour charges. |
| 51 | Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. |
| 52 | Collection and supply of filling the stones in soak pit including cost and conveyance of materials to the work site and all labour charges. 40 mm Metal |
| 53 | 20 mm Metal |
| 54 | Plastering with CM 1:5, 12mm thick. in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 55 | Provisions for supply and fixing of precast RCC cover slab including cost and conveyance of materials and all labour charges |
| 56 | Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends,& clamps etc., |
| 57 | Towards Photographic charges |
| 58 | Towards Name board charges |
| 59 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender