Tender For Supply Installation Testing and Commissioning of Architectural Column Light Pole, Cable Laying And Other Related Work At Different Roads Such As Najafgarh Road, Lala Ganesh Das Khatri Marg, Vedic Marg, Road 235 Ext., Guru Virjanand Marg Et
Tender Value
89.41 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
3 days left
EMD
1.78 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Architectural Column Light Pole, Cable Laying And Other Related Work At Different Roads Such As Najafgarh Road, Lala Ganesh Das Khatri Marg, Vedic Marg, Road 235 Ext., Guru Virjanand Marg Etc. In Tilak Nagar Constituency Ac-29.
BOQ
| Sl. No. | Item Description |
| 1 | SITC of Square cross section light column made of M.S including laser cut design (~ min 2.4 m height M.S Laser cut including name/logo provided by Engineer in charge) cladded with opal acrylic diffuser and additional post top head,Total minimum height of Pole should be 3600mm, Black in colour,must be coated for high corrosion resistance, silicon gasket, SS fastener, integral driver prefrebly Philips or Fulham, GI pedestal mounting assembly, IP‐66, Ik ≥07 for complete light fixture. 270‐degree light distribution in the column part provided with ~6W/m Vertical liner LED unit with 1X40W LED (4Nos.) min. 100 lm/W with type‐II luminaire and low glare indirect line of vision, efficiency >85%, THD< 10%, CRI >70, PF >0.9, LED burning life 50000 h, CCT 3000K (warm white). The vertical laser cut design to ~2.4m in height above ground level, minimum cross‐section ~ 150X150mm, MS sheet thickness ≥3mm, Pre‐wired with earth connection integral junction chambers for cable termination with four‐way 32Amp heavy duty connector‐1 No. SPMCB, drivers, fastener & all accessories etc. complete as required.. ( Make: Twinkle, Hi Lite or eqvivalent make ) |
| 2 | Providing and laying in position M-20 (1:1.5:3) reinforced cement concrete foundation of size 400 mm.(L) X 400 mm wide and 1200 mm. , providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 1400 mm long (approx) - 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia - 1800mm (approx) (with 140 mm spacing) as required with positioning of foundation bolts (as per item below) and providing 63 mm. (O.D) DWC, HDPE Pipe for cable entry & exit as required including base plate, J Hooks, nut Bolts, Washer, Anchor Plate all as per OEM, with welding of it as suitable for the pole. |
| 3 | Supplying of following size XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade in RCC/DWC Pipe/ by excavation of all type of soil having minimum depth 2 feet/Open Channel etc as required. |
| 4 | 4 x 16 Sqmm |
| 5 | 4 x 25 Sqmm |
| 6 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 7 | Upto 35 sq. mm |
| 8 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 9 | A) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 10 | Supplying and laying of following size GI pipe as per IS/1239 ISI MARKED C Class (heavy) along with all accessories like socket, bend, couplers etc. complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 11 | 50mm dia G.I. Pipe |
| 12 | Supplying & Fixing of following size Aluminium thimble with proper connection and PVC Tape etc as required. |
| 13 | 16/25 Sqmm |
| 14 | Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.A) bituminous portion |
| 15 | Disposal of building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 16 | SITC of (Factory fabricated, floor mounted out door type high quality SMC/FRP Hot pressed molded, Feeder Pillar with Canopy and G.I stand, pillar size: 1200mm x 800mm x 600mm IP 54 (in accordance with applicable IEC) should be Halogen free, slow burning and self-extinguishing in nature in accordance with IEC 60695. The system should be in accordance with IEC 60695, IEC 60439 and IEC 60208, Glow wire test, Degree of protection against mechanical load IK 10(20Joule) in accordance with IEC 62262. The Entire system should have hinged doors with an opening angle of 95 degree which can be only opened with special lock and key tool. It will be dustproof, rust proof, termite proof, shock proof, vermin proof, anti-corrosive, anti-acid, durable, strong, heavy duty, safe for operating lineman, Maintenance free, ultra violet stabilized, FVO-UL94, weather proof, flame retardant, environment friendly, zero resale value, pilferage proof SMC door having danger logo on its cover with stain less steel heavy-duty handle, 1 number name plate of property of PWD, fitted with mentioned switchgear. The color code should be off white and all metal parts use are made of non-corrosive material. Rated insulation voltage should be 1000 V AC/1500 V DC.(Make :- Boxxman or equivalent) Electrical parameters as under: - Type of Panel – SMC / FRP Feeder Panel Feeder Panel Size - 1200 x 800 x 600mm Degree of protection -IP54 Bus bar : 100 A 3 phase Aluminum Busbars Operating Window for MCB knob operation System Voltage - 415V , 50HZ=z, 4 Wire +E Cable Entry - Incoming /Outgoing from Bottom Installation- Outdoor /Wall Mounting INCOMER :- 63A 4 pole 10KA MCB with connectors -1 No. METERING:- Digital Voltmeter: 1 No. Digital Ammeter: 1 No. RYB LED Indicating lamp: 1 No Each Current Transformer: 100/ 5A -3 Nos OUTGOING :- 32A 4 pole 10kA MCB with connectors -4 Nos. |
| 17 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 18 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 19 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender