Tender For Repairing And Refurbishing Of 5000 Lpd Solar Water Heating System At Hotel The Ashok, New Delhi.
Tender Value
4.95 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
7 days left
EMD
9950
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Refurbishing Of 5000 Lpd Solar Water Heating System At Hotel The Ashok, New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Repair, Installation, Testing & Commissioning of following Solar water heating system of capacity of 5000LPD Solar Water Heater at roof top as per the following- |
| 2 | Servicing & De-Scaling of Solar Collectors & complete system piping with special de-scaling chemical circulated through a descaling pump as required. |
| 3 | Supply & Installation of Auto Air Vents (AAVs) in Collector Line as required. |
| 4 | Supply & Installation of Air Release Valve (ARVs) in Collector Line with accessories as required. |
| 5 | Supply & Installation of FPC based Solar Flat Plate Collector as required. |
| 6 | Supply & Installation of FPC based Solar Flat Plate Collector’s Glass as required at site. |
| 7 | Repairing of FPC based Solar Flat Plate Collector - Copper Collar required for connecting two collectors with each other. |
| 8 | Replacement of Hose Pipe with adjustable Screw bolt clamp ties for interconnection between Collectors and GI Pipe complete as required. |
| 9 | SITC of Re-Circulation Pumps with duplex inline mono-block type with SS Body and SS Impellers mounted on a stainless steel shaft running on sleeve/ball /roller bearings with Suitable high temperature lubrication to withstand 110 Degree of temperature, capacity of 3.4KLPH, 12Mtr Head with 26 SWG Aluminium Sheet Covering (1W+1S) complete as required. |
| 10 | SITC of Timer based Control Panel (IP 65) for Circulation Pump. Including connection and termination up to recirculation Pumps. |
| 11 | Supplying and Drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. |
| 12 | 3Cx2.5 sq.mm FRLS Cu Cable |
| 13 | 1Cx2.5 sq.mm FRLS Cu Cable |
| 14 | Providing & Fixing of 40mm dia Ball Valves Bronze (Screwed Ends) as required at site. |
| 15 | Providing & Fixing of Ball Valves (brass) of approved quality, High or low pressure, with plastic floats complete- |
| 16 | 25 mm nominal bore |
| 17 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps including cutting and making good the walls etc internal work-exposed on wall |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer In Charge. Internal work-Exposed on wall |
| 19 | 40 mm nominal bore |
| 20 | 25 mm nominal bore |
| 21 | 20 mm nominal bore |
| 22 | Providing and fixing of Insulation on GI Pipes with the help of Neoprene Insulation and cladding of the insulation by 24SWG Aluminium complete as required. |
| 23 | Replacement of interconnecting EPDM Gaskets between Collectors |
| 24 | Replacement of interconnecting Brass Flanges between Collectors. |
| 25 | Replacement of M6 SS304 Nuts and bolts of Collectors |
| 26 | Replacement of Front and Back Legs of Collectors (made out of MS Painted after Red oxide Primer) |
| 27 | Providing & Fixing of Temperature Gauge - Dial Type (0-200ºC) |
| 28 | Providing & Fixing of Safety Valve - 40mm Bronze, Spring Loaded complete as required. |
| 29 | Providing and fixing of gun metal Non Return Valve of approved quality (screwed end). (vertical) |
| 30 | 40 mm nominal bore |
| 31 | Providing and laying PCC 1:2:4 in foundation for blocks and module mounting structure, including mixing, laying, compacting, finishing, curing etc. complete as per requirement and direction of Engineer-in-Charge. |
| 32 | Painting of Solar water Tank with Epoxy Paint to withstand temperature of 120 degree Celsius after derusting the tank from inside complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender