Tender For Construction Including Testing And Commissioning Of Pre-Settling Tank (Pst) Along With Carrying Of Minor Electro-Mechanical Works For W.S.Scheme Checkpora Nowpora Under Jkidfc (Now Ut Capex) 2026-2027.
Tender Value
22.09 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
15 days left
EMD
44180
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Including Testing And Commissioning Of Pre-Settling Tank (Pst) Along With Carrying Of Minor Electro-Mechanical Works For W.S.Scheme Checkpora Nowpora Under Jkidfc (Now Ut Capex) 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 2 | Providing and laying hand packed stone soling (Quarry) 75mm nominal size including ramming and dressing including all leads lifts and all carriages complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Crushed. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level .1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level. Thermo-Mechanically Treated bars |
| 12 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand) |
| 13 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 14 | Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers: |
| 15 | Providing and incorporating during concreting G.P strip water seal 0.63mm nominal thick at construction joint as per proper specification and instruction of engineer incharge complete job |
| 16 | Providing and fixing of 200mm dia M.S flange bend/tail pieces, specials etc of size 0.90-1.50m as per directions of site Engineer incharge complete job |
| 17 | Providing, installation, testing and successful commissioning of approved make C.I sluice valve non rising spindle type incld. Tail pieces and directions of site Engineer incharge. 200mm dia |
| 18 | Mechanical Work:Supply, installation, testing and commissioning of type Open Well Pumping Unit PUMP:Type of pump: open-well Submersible PumpQuality of Water to be handled: Raw water Discharge: 10000 GPH (UK Gallon) Head: 20 m Pump Casing : Cast IronImpeller : SS/BronzePump Shaft : Stainless Steel 410Motor Body : Cast Iron/SSThe bowl plate shall be provided with name plate giving complete specifications MOTOR: -Method of starting: Star - Delta/DOL (as specified).Frequency : 5OHz + 3%Voltage: 415+6%,-15% 3 phaseSpeed: 2900 RPMCapacity: Corresponding to head and discharge and availability in marketClass of insulation: Suitable for above rating.Sealing: Dual mech. seal. Provided with thermal and overload protectionThe motor shall be made of corrosion resisting materials to resist corrosion under normal conditions and the motor shall have a name plate giving complete specificationsNote: Test certificate having the Serial No. of the Pumping Unit along with the performance curve in duplicate from the Manufacturer must be produced before delivery of the item and pumping unit is to be approved from the concerned Sub Divisional office before procuringThe job includes providing and fitting of suitable increaser / reducer / offsets/flanged bends on the delivery manifold side), steel clamps, nipple and other allied works to connect with existing manifold as per the site requirement. Necessary adjustments, if required, shall be carried out as per the size and dimensions of the pumping unit.The scope of work also comprises Installation of the pumping unit in the present opening, after dismantling of the old damaged pumping unit. |
| 19 | Carriage of materials by mechanical transport from source to actula site of work including loading, unloading and stacking of material: cement/steel for avg. lead 4 kms |
| 20 | Carriage of materials by mechanical transport from source to actula site of work including loading, unloading and stacking of material: Sand for avg. lead 17 kms |
| 21 | Carriage of materials by mechanical transport from source to actula site of work including loading, unloading and stacking of material: Stone Agg. 40 mm Nominal Size for avg. lead 13 kms. |
| 22 | Carriage of materials by mechanical transport from source to actula site of work including loading, unloading and stacking of material: Stone Agg.20 mm Nominal Size for avg. lead 17 kms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender