Tender For Special Repair To False Ceiling And Tiling In Building No P-12, P-13 And Basket Ball Ground At Grn Bn Under Ge (West) Colaba, Mumbai
Tender Value
29.20 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
18 days left
EMD
58400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To False Ceiling And Tiling In Building No P-12, P-13 And Basket Ball Ground At Grn Bn Under Ge (West) Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced, complete all as specified and directed. |
| 3 | Material and labour for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments, complete all as specified and directed. |
| 4 | M&L for Virified Ceramic tiles (light shade) 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing shade, complete all as specified and directed. |
| 5 | All as per item No. 01 above but on vertical surfaces like skirting/dados etc. |
| 6 | M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc, complete all as specified and directed. |
| 7 | M&L rendering 10 mm thick plaster on fair faces of brick work in CM (1:4), complete all as specified and directed. |
| 8 | Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work, complete all as specified and directed. |
| 9 | M&L for GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.45-0.55 mm thickness having kurled web of 40-50mm and flange of 22-26mm each with lips of 9-10mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed. |
| 10 | M&L for 7-8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605x605 mm grids, complete all as specified and directed.Note:- Frame work for ceiling shall be measured and paid separately.) |
| 11 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 12 | M & L for 10-12 mm Thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (external surface) and finished even & smooth without using extra cement, complete all as specified and directed.Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/ M/s Ultratech Cement Ltd. |
| 13 | M&L for the prepration of wall including complete removal of existing treatment and applying 2 mm thick (average) wall care putty, rubbing with sand paper for making the wall surface to receive two coats of distemper oil emulsion over a coat of alkali resistant priming paint, complete all as specified and directed. |
| 14 | M&L for the prepration of newly plastered surface of wall and applying 2.00 mm thick (average) wall care putty, rubbing with sand paper for making the wall surface to receive two coats of distemper oil emulsion over a coat of alkali resistant priming paint, complete all as specified and directed. |
| 15 | S&F for joist, channel, angle or tee sections or MS Flats fixed independantly without connecting plates, etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas, including dismantling old wrought iron, complete all as specified and directed. |
| 16 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site, complete all as specified and directed. |
| 17 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes, complete all as specified and directed. |
| 18 | All as per Item No. 17 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed over rendering 10 mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed. |
| 19 | M & L for Cement concrete in foundations, filling and mass concrete type B-2 1:2:4 (40mm greded stone aggregate), complete all as specified and directed. |
| 20 | Demolition of brick masonary built in cement mortar, complete all as specified and directed. |
| 21 | Pre-cast cement concrete block masonry set in cement mortar 1:6, Type C-1 1:3:6 (20mm graded aggregates) with solid blocks, exc.10 cm in width and setting in mortar, complete all as specified and directed. |
| 22 | M&L for preparation of old steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 23 | Painting lines, dashes, arrows, letters etc on roads, pavements and the like n.exc 10 cm wide with road marking paint White or Golden Yellow, complete all as specified and directed. |
| 24 | M & L For Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, complete all as specified and directed. |
| 25 | Taking down carefully copper/aluminium point wiring including sunken M S Boxes (Light, Fan, socket or power) complete. (fitting such as switches, ceiling roses,call bell pendants,regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls floors etc, complete all as specified and directed. |
| 26 | M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in PVC casing & caping heavy duty surface wiring, MS sheet metal switch/Terminal box 1.2 mm thick and modular white cover with frame and modular metel box flush box, brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface, complete all as specified and directed. |
| 27 | All as per item No. 26 above but for Same board 5 Amps switch socket out let using P 1.5 Sq mm wire with 1.5 Sqmm wire for earth continuity conductor and modular white cover with frame and modular metel box flush box. |
| 28 | All as per item No. 26 above but for independent 5 Amps switch socket out let using 1.5 Sqmm wire with 1.5 Sqmm wire for earth continuity conductor with modular white cover with frame and modular metel box flush box. |
| 29 | All as per item No. 26 above but for 5/15 Amps switch point socket out let using 4 Sqmm wire with 4 Sqmm wire for earth continuity conductor on independent board with modular white cover with frame and modular metel box flush box, complete all as specified and directed. |
| 30 | Supply and fixing including connection of Modular switch 1 way 6A, 1 module one way, complete all as specified and directed. |
| 31 | Supply and fixing including connection of Modular Socket outlet 3 pin, 6A, flush type, complete all as specified and directed. |
| 32 | Supply and fixing including connection of Modular Switch socket outlet 3 pin 6 amp' flush type, complete all as specified and directed. |
| 33 | Supply and fixing including connection of Switch socket outlet multi purpose 3 pin, 16 amp and one pin, 6 amp controlled by one switch, complete all as specified and directed. |
| 34 | Supply and fixing of ceilings rose of PVC polycarbonate isolated body three terminals, complete all as specified and directed. |
| 35 | Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement, complete all as specified and directed. |
| 36 | M&L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable of size 2 x 4 Sqmm and earth continuity conductor of size 1 x4 Sqmm to be drawnin PVC casing caping, complete all as specified and directed. |
| 37 | Supply and fixing in repair LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 38 | Supply and fixing in repair LED Building security light fitting of capacity 30 watt new compact designed for the most effective thermal management IP 66 with highly effective and efficient lighting solution high power LED Building Security light including provn of necessary connection complete including taking down off building security light. |
| 39 | Taking down serviceable / unserviceable switch fuse unit/MCB DB with MCB etc for necessary repair/replacement and reuse, complete all as specified and directed. |
| 40 | Supply and fixing of MCB DB double door, made of sheet steel phosphates, powder painted with bus bar, neutral link, earth bar and din rail SPN 8 way with 200 Amps rated bus bar 240 Volts, complete all as specified and directed. |
| 41 | Taking down serviceable / unserviceable MCB etc for necessary repair/replacement and reuse, complete all as specified and directed. |
| 42 | S & F miniature circuit breaker (MCB) SPN of 40 amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 43 | S & F miniature circuit breaker (MCB) SP of 10 amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 44 | Supply and fixing in repair of Gl pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers, complete all as specified and directed. |
| 45 | M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground (earth pit not less than 2.25m below normal ground level) connected to galvanized earth lead 4 mm dia by means of bolts, nuts. check nuts and washers of galvanized iron or steel including 40 mm dia medium grade Gl tubing for protection of earth lead. MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type C-1, 50 mm thick precast RCC (1:2:4) type B-1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including galvanised strip of size 25 mm x 3 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a disance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 of SSR Pt-I including taking down old one, complete all as specified and directed. |
| 46 | M&L and fixed in repair for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drwan in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire mm dia galvanised iron strip, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender