Tender For Special Repairs Of Bathrooms And Toilet Blocks For Bldg No. P-02, P-03 Of 15 Jakli Under Age B/R (West) Of Ge (West) Colaba Mumbai
Tender Value
49.49 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
16 days left
EMD
98980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Bathrooms And Toilet Blocks For Bldg No. P-02, P-03 Of 15 Jakli Under Age B/R (West) Of Ge (West) Colaba Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar, removeing and rubbish off the premises, complete all as specified and directed. |
| 2 | Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) & removing rubbish out side MD land, complete all as specified and directed. |
| 3 | M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in sub base of flooring, complete all as specified and directed. |
| 4 | M&L for 75mm thick PCC 1:4:8 type D-1 using 40mm graded stone aggregates as in sub base of flooring, complete all as specified and directed. |
| 5 | M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and directed. |
| 6 | M&L for Glazed ceramic tiles light shade in vertical surface 450x300x7mm thick, jointless tile set and jointed in neat cement slurry and pointed in white or coloured cement, set in 10mm thick backing coat in CM 1:3, complete all as specified and directed. |
| 7 | M&L coloured digital glossy/Matt outdoor elevation ceramic tiles in vertical surface 450x350x7mm/600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 8 | M&L for any coloured vitrified heavy duty outdoor anti skid tiles 12 mm thick (Square/rectangular) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20 mm thick in cement plaster in CM (1:4) for fixing tiles, complete all as specified and directed. |
| 9 | M&L for PCC 75mm thick type B-1 1:2:4 (20 mm graded stone aggregate) laid in alternative as in plinth protection including finished the surface even & fair without using extra cement, complete all as specified and directed. |
| 10 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc, complete all as specified and directed. |
| 11 | M & L for 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement, complete all as specified and directed. |
| 12 | M & L for rendring 15mm thick in cemet mortar 1:6 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement, complete all as specified and directed. |
| 13 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth with out using extra cement, complete all as specified and directed.Note : WPC will be measured and paid separately. |
| 14 | Supply only integral liquid water proofing compound, complete all as specified and directed. |
| 15 | M&L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 16 | M&L for preparation of new plastered surfaces of surfaces of wall, cornices by brooming down or steel wire brushing, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on wall, complete all as specified and directed. |
| 17 | M&L for preparation of new plastered or unplastered surface of wall incl washing/ rubbing down and stopping of old painted surfaces of ncluding cornices etc and making good of holes by filling holes in plastered surfaces with POP and applying one coat of synthetic enamel exterior emulsion paint, complete all as specified and directed. |
| 18 | M&L for preparation of old plastered or unplastered surface of wall incl washing/ rubbing down and stopping of old painted surfaces of ncluding cornices etc and making good of holes by filling holes in plastered surfaces with pop and applying one coat of synthetic enamel exterior emulsion paint, complete all as specified and directed. |
| 19 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame, complete all as specified and directed. |
| 20 | S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR, complete all as specified and directed as approved by Accepting Officer |
| 21 | S/F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, uppling & fixing in the frame at site as per specification & drawing etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 22 | S/F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, uppling & fixing in the frame at site as per specification & drawing etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender