Tender For Construction Of Gate And Repair Of The Kitchen At Double Bedroom Hut At Manasbal Under maintenance and repair Grants (Non Plan)2026-27
Tender Value
9.87 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
19740
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Gate And Repair Of The Kitchen At Double Bedroom Hut At Manasbal Under maintenance and repair Grants (Non Plan)2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) all complete. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :50 meter beyond 1m from cutting edge: |
| 3 | P/L, of dry stone soling duly hand packed for foundation and backfilling with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. carraige all Complete. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete. |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.including all carriage involved complete. |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) all complete. |
| 8 | Providing & laying Chisel dressed stone masonry with ( baramula cut Stones) in 1:6 cement mortar with moulded or moulded and sunk masonry including making horizontal and vertical grooves complete as per architectural drawings as desired by EIC incl. all carriages of material involved incl head load complete. |
| 9 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded complete. |
| 10 | Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse Sand) incl. carriage all complete. |
| 11 | Engagement of labours for clearance of site b.w.o removing of unhygenic materials, vegetation, roots, bushes, other unwanted materials, grass etc and its disposal outside the site permises as directed by EIC all complete. F |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work incl.Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 13 | P/F of 12 mm thick Nordic pine wall paneling (T&G) fully finished & four sides planned,fungus and termite proof (seasoned moisture content 8% to 15% imported type ISO :14001 approved including fixing with head less nails and inclusive all carriages, all taxes of allied material involved (including Budloo wood frame) work by 50 x 50 mm battens not more than 600mm c/c both ways, 12mm thick ply wood and touch wood polishing two or more coats complete in all respects. |
| 14 | Providing and fixing of wooden Pergo flooring of shade and pattern as per EIC of 8-10mm thick incl. 6mm thick foam sheating underneath and 25mm thick cornice and including all the necessary fittings/fixtures/adhesives/nails etc design and pattaern as per directions of EIC all complete. |
| 15 | P/F of ornamental cornice of 50x50 mm of approved design incl. fixing with stainless steel screws , nails, varnishing etc all complete (1st Class Kail wood). |
| 16 | Providing and fixing of 15\\" to 24\\" deep wardrobe/ Almirah/ fixed counters of approved design and make incl. shutters, partations with 19mm thick water proof ply board and back covering with 6mm thick ply wood and finishing with mica incl. all fixtures/hardware and locking arrangements all complete. Pattern and desin as per aproved by EIC. |
| 17 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown all complete. |
| 18 | P/F of 3.5mm thick glass panes in windows, clerestory windows etc incl. all necessary abeading, nails, screws etc all complete. |
| 19 | Engagements of JCB for execution of works including driver, fuel & lubricants as required all as per the direction of EIC. |
| 20 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 21 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm incl. priming and painting coat as directed by EIC all complete. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns etc complete. |
| 23 | Carraige of Material:- Stone Agg. For an avg. lead of 10 Kms |
| 24 | Sand for an avg. lead of 15 Kms |
| 25 | Lighting point (One lighting point) includes wiring of lighting point in 1.5 sqmm PVC insulated copper wire and 2.5 Sq.mm PVC insulated multistandard copper wire , 6 Amp one way switch , 6 Amp S pole MCB, 10 amp DP MCB, 2 way DB MCB and hylem sheet with 16/15 Watt LED surface lights including cost of channels as per requirement< One Point controlled by One 6 Amp switch (upto 10 meters) including placing and fixing in position 25mm PVC Conduit pipes with necessary bends and other fittings in RCC works including Cost of Service line as directed by Engineer Incharge. |
| 26 | Heating point ( One heating point ) including wiring of lighting pointin 2.5Sq.mm PVC insulated copper wire and 4.00 Sq.mm PVC insulated Multistrand copper wire, 16 Amp one way switch, 10 Amp S pole MCB, Two way DB MCB and hylem sheet including placing and fixing in position deep junction of cast iron with network . Conduit pipes with necessary fittings in RCC work complete as per the directions of Incharge Engineer. |
| 27 | Providing and fixing of one fan point including wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5Sq.mm PVC in multistrand copper wire 1200mm ceiling fan Electronic fan dimmer, 6 Amp S pole MCB, 10 Amp DP MCB, 2 Way DB for Housing MCB or Lighting Circuits and hylem sheets including placing and fixing in position fan clamp boxes with MS Fan clamps connected with network conduit pipes with necessary fittings in RCC work complete as per the directions of Incharge Engineer. |
| 28 | Providing and fixing of Exhaust Fan, incl. wiring, fixtures and other accessories as required all complete (Khaitan/Havels or equivalent brand) all complete. |
| 29 | Supply/fixing of main service line (7/16) from LT line incl. all necessary wire fittings/fixtures etc all complete. |
| 30 | P/F of 5 mm thick glass panes in windows, clerestory windows etc incl. all necessary abeading, nails, screws etc all complete. |
| 31 | Providing and fixing of ceramic wash basin with padestal of required size and standard quality cera, parrayware, hindware with white viterous china pedestal as required incl. all necessary fittings all complete. |
| 32 | Providing and Fixing of C.P wall mixer for wash basin of approved brand and make including cutting and making good of walls wherever required . Design as per the directions of Incharge Engineer. |
| 33 | Floor Trap Stainless Steel |
| 34 | Tower Bolts 100mm |
| 35 | Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gram/m2 |
| 36 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc |
| 37 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:3 (1 cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (18mm thick) (Granite of any colour or shade as approved by Engineer-incharge). Area of Slab over 0.5 sqm. |
| 38 | P/L in position reinforced cement concrete in 1 : 2 : 4 (1 cement:2 course sand: 4 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete. ( all works upto plinth level) all complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender