Tender For Providing High Jhulla And Gym In Parks Of R-1, R-2 In Ward No 7
Tender Value
8.18 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
5 days left
EMD
15000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaithal → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing High Jhulla And Gym In Parks Of R-1, R-2 In Ward No 7
BOQ
| Sl. No. | Item Description |
| 1 | providing, designing and fixing of OUTDOOR MULTI PLAY STATION FOR KIDS including one straight slide, one spiral slide ,one wave slide, two bridges . Three main post platforms having Designed colorful roof and minimum two stairs. The size should be minimum 6000mm*4500mm*3700mm, fabricated with MS hollow main post of 150mm dia and 3mm thick and other pipe of 50mm dia 3mm dia made up of hot rolled tubular steel and dipped galvanized ,and powder coated 80-120 micron thick using AKZO Nobel or equivalent in desired shade and colour. all joint of pipe should be welded properly and dressed of removing sharp edges and burrs. Zinc primer paint to be applied to be all welding points prior to finishing . High quality plastic fiber /LLDPE plastic to be used with minimum 4mm thickness UV resistant As per designed and colour approved by Engineer in-charge. All material should be anti UV ,Anti heat, safe and Eco friendly . should be fixed in ground strength M25 . complete as per direction of Engineer-in-charge regarding material, shape and equipment, colour of metal and fixing of same to the satisfaction of Engineer-in -charge. |
| 2 | Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 3 | Horse Rider Station: Providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
| 4 | Outdoor Furniture in Open gym and playing equipments in various parks |
| 5 | Outdoor Furniture in Open gym and playing equipments in various parks Providing and fixing of Park Equipments Chair Swing |
| 6 | Outdoor Furniture in Open gym and playing equipments in various parks Providing and fixing of Park Equipments Double See-Saw |
| 7 | All HSR ITEM (SEE IN DNIT) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender