Tender For Camouflage Painting To Compound Wall/ Security Wall & Certain Building At Af Stn Bhuj
Tender Value
45 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
9 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Camouflage Painting To Compound Wall/ Security Wall & Certain Building At Af Stn Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick, PCC block or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, etc. and removing rubbish outside MD land complete all as specified and as directed. |
| 2 | M&L for rendering 15mm thick in cement sand mortar 1:4 on fair faces of brick work, PCC block masonry or concrete surfaces, mixed with water proofing compound and finished even and smooth without using extra cement as per manufacturer's instructions. Note:- Supply only Integral water proofing compound will be measured and paid seperately |
| 3 | Supply only integral water proofing compound. |
| 4 | M&L for crack repairing in walls & similar surfaces for cracks n exc 5mm wide using crack filling material of with average coverage of 25-30 Rm per kg for a depth of 5mm & width of 5mm. |
| 5 | M&L for preparation of new or previously untreated concrete or PCC block masonry plastered external surfaces and applying two coats of exterior emulsion paint (in camouflage pattern as approved by the GE) over a coat of primer all as specified and directed by EIC |
| 6 | M&L for complete removal of existing treatment & preparation of plastered or unplastered old decorated external surfaces of walls by Vaccum Based sanding machine and applying two coats of exterior emulsion paint over one coat of primer in camouflage pattern as approved by the GE, all as specified and directed |
| 7 | M&L for preparation of plastered or unplastered old decorated external surfaces of walls by Vaccum Based sanding machine and applying one coat of exterior emulsion paint in camouflage pattern as approved by the GE, all as specified and directed |
| 8 | M&L for preparation of old painted sufaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on steel and iron surfaces on roof coverings, angle iron of fencing and steel surface in camouflage pattern (as approved by GE), complete all as specified and as directed. |
| 9 | M&L for for complete removal of existing treatment & preparation of old sufaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of primer on steel and iron surfaces on angle iron of fencing ,roof coverings and steel surface in camouflage pattern (as approved by GE) , complete all as specified and as directed. |
| 10 | Demolition of PCC block masonry built in any cement mortar |
| 11 | M&L Pre-cast cement concrete block masonry with solid blocks of mix (1:3:6) type C1 exc.10 CM in width and setting in cement mortar (1:6) Complete complete all as specified and directed. |
| 12 | M&L Pre-cast cement concrete block masonry using old blocks obtained from demolition exc.10 CM in width and setting in cement mortar (1:6) Complete complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 14 | S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured. |
| 15 | Fixing only (existing barbed wire) Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured. |
| 16 | Dismantling existing galvanised steel punchedtype concertina coil 1050 mm dia placed on top of the wall inside the angle iron horns/GI barbed wire, tying with necessary GI wire complete all as specified and directed. |
| 17 | Supply and fixing galvanised steel punched type concertina coil 1050 mm dia when stretched (stretched to 8 mtr length) placing on top of the wall inside the Angle iron horns/GI barbed wire, tying with necessary GI wire complete all as specified and directed. |
| 18 | Fixing only (existing concertina coil) galvanised steel punched type concertina coil 1050 mm dia when stretched (stretched to 8 mtr length) placing on top of the wall inside the Angle iron horns/GI barbed wire, tying with necessary GI wire complete all as specified and directed. |
| 19 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking outembedded portion and making good disturbed ground embedded in concrete |
| 20 | Dismantling fencing wire mesh, any type |
| 21 | S&F chain link fencing plastic coated MS wire made out of 3.5mm outer dia, of size 75 mm x 75 mm, including straining bolts etc. including provn of binding wire or with nuts/bolts complete all as specified and as directed by the EIC. |
| 22 | M & L for 10 mm dia and over round bars cut to length bent to shape reqd incl cranking bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe 290 Gde E-165. |
| 23 | Excavating in post holes (or similar holes) each n exc 0.5 Cum & getting out in soft/loose soil |
| 24 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 25 | Material & labour for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling, and mass concrete complete all as specified and directed by Engineer-in-Charge. . |
| 26 | M&L for preparation of new or previously untreated surfaces of any description, not otherwise described, exc 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces al as specified. |
| 27 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 28 | M&L running welding in repairs exc 6mm not exc 9mm in any description and any position |
| 29 | Dismantling Stone slabs and tiles laid dry of any description or thickness in floors, aprons etc. |
| 30 | M&L for 20mm thick Granite (Z Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm thick screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.NOTE : Cost of Screed Bed shall deemed to be included in QUOTED UNIT RATE. |
| 31 | Demolition of cement concrete of any description and in any position complete |
| 32 | M&L cement concrete type Bo 1:2:4 (using 12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender