Tender For Improvement To Windows And Flooring Of Certain Smqs At Af Station Bhuj
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
16 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Windows And Flooring Of Certain Smqs At Af Station Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying two coat of white wash, complete all as specified and as directed. |
| 2 | M&L forPreparation of old treated surfaces of Ceilings including brooming down, scrapping down smoke soots etc. and appying two coat of white wash, complete all as specified and as directed. |
| 3 | M&L for Complete removal of existing treatment on wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and as directed. |
| 4 | M&L applying 1-2mm thick wall care putty on wall surfaces all as directed by Engr-in-Charge. |
| 5 | M&L for Preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 6 | Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description |
| 7 | M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces. |
| 8 | M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified.Note : WPC will be paid separately. |
| 9 | M&L for rendering on concrete surfaces 15mm thick in two layers first layer 10mm thick and 2nd layer 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair.Note : WPC will be paid separately. |
| 10 | Supply only water proofing compound |
| 11 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete. |
| 12 | M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by EIC. |
| 14 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 15 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land. |
| 16 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in sub base of floors etc. |
| 17 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 18 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 19 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 20 | M&L glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:4 all as specified and directed. |
| 21 | M&L for 20mm tjick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 22 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm |
| 23 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm |
| 24 | M&L 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 25 | M&L Pressed steel frames for doors size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 26 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides), Fe-410- W(Gde-E-250) quality- B and hanging; also fastening and fixing complete |
| 27 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete. |
| 28 | S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 29 | M&L for preparation of new wooden painted surfaces of any description exc 10 cm width or girth and appying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 30 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 31 | S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed. |
| 32 | S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed. |
| 33 | S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed. |
| 34 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 35 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing. |
| 36 | M&L for aluminium window with double/Single side hung shutter for glazing and gauging and frame with one or more rebates made out of anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separatelySize of Section for Fram 100x45mm and 1.20mm ThickSize of Section for shutter 85x45mm and 1.20mm thickSize of Section for wiremess shutter 40x20mm and 1.00mm thick . |
| 37 | Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm |
| 38 | Taking down shutter of any description and refixing in same opening exc 1 sq. M and n exc 2 sq. M each all as specified and directed. |
| 39 | Taking down shutter of any description exc 1 sq. M and n exc 2 sq. M each all as specified and directed. |
| 40 | S&F in repairs two way angle cock 15mm chromium plate screw down screwed for iron pipe of brass ferrule etc complete all as specified and directed by EIC |
| 41 | S&F in repairs Vitreous China wash basin white flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, all as spd. |
| 42 | S&F in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe . |
| 43 | S&F in repairs 600x 450 mm beveled edge mirror of selected quality of glass, mounted on 6 mm thick AC bldg board or commercial ply wood and fixed to wooded plug with chromium plated brass screw and cup washer. all as specified and directed. |
| 44 | S&F in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 x 460 mm, bowl size 410 x 330 x 180 mm complete all as specified and directed. |
| 45 | S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE . |
| 46 | S&F PVC shelf wall corner size 230 mm with all fittings/brackets complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S&Fin repairs for Vitrious china squalting pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) |
| 48 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete, including supply and fixing of seat cover all as directed by Engr-in-Charge. |
| 49 | S&F grating square 150 mm size of but with waste hole of PTMT. (Minimum weight 100gms) |
| 50 | S&F in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, flaot and handle including brackets of 10 Ltr capacity. |
| 51 | S&F in repairs for bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore. |
| 52 | S&Fin repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed. |
| 53 | S&F in repair aluminium anodised plated Tubular towel rail 20mm dia, D type, 60cm long between flanges all as specified and directed. |
| 54 | S&F in repairs for brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed. |
| 55 | M&L in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 56 | S&F in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 750 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) |
| 57 | Taking up or down 15mm bore of steel tubing and connections including removal to store for reuse or credit to contractor Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing,where required. |
| 58 | Taking up or down 20mm bore of steel tubing and connections including removal to store for reuse or credit to contractor Note : (a) The rates apply to pipes above or below ground only in repairs and alterations.(b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required. |
| 59 | Taking up or down 25mm bore of steel tubing and connections including removal to store for reuse or credit to contractor Note : (a) The rates apply to pipes above or below ground only in repairs and alterations.(b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required. |
| 60 | S&F CPVC pipes 20mm bore ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors Etc: (SDR-13.5) |
| 61 | S&F CPVC pipes 25mm bore ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors Etc: (SDR-13.5) |
| 62 | Dismantling of 100/110mm dia of pipes cast iron,PVC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of trenches if required all as directed by Engr-in-charge |
| 63 | Dismantling of 75mm dia of pipes cast iron,PVC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of trenches if required all as directed by Engr-in-charge |
| 64 | S&F 100/110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all asspecified and directed by Engr-in-Charge. |
| 65 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all asspecified and directed by Engr-in-Charge. |
| 66 | S&F 110mm dia of PVC (SWR) junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement. |
| 67 | S&F 75mm dia of PVC (SWR) junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement. |
| 68 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia. |
| 69 | M&L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement |
| 70 | S&F of PVC (SWR) bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes. |
| 71 | S&F of PVC (SWR) bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender