Tender For Reverse Osmosis Plant Set And Its Accessories Along With Solar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Sep 2026
13 days left
EMD
3 Lakhs
Bank guarantee accepted
Document Fee
30000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reverse Osmosis Plant Set And Its Accessories Along With Solar
BOQ
| Sl. No. | Item Description |
| 1 | RO plant and accessroies |
| 2 | 12LPH water purifier as per annexture A |
| 3 | 25LPH water purifier as per annexture A |
| 4 | 50LPH water purifier as per annexture A |
| 5 | 50LPH water cooler +RO+UV + dispenser as per annexture A |
| 6 | 120LPH water dispenser-Storage water cooler 120LPH cooling capacity and storage capacity with SS304 body (approx dim - 790mmX 589mmX1235mm |
| 7 | 100LPH industrial Plant as per annexture A specification |
| 8 | Design ,Providing,Installation ,and Commissioning of Reverse Osmosis Base ( Capacity 250LPH ) water purification Plant including Comprehensive operation and Maintenance for a period of one year on TURN KEY BASIS as per annexture A specification |
| 9 | Design ,Providing,Installation ,and Commissioning of Reverse Osmosis Base ( Capacity 500LPH ) water purification Plant including Comprehensive operation and Maintenance for a period of one year on TURN KEY BASIS as per annexture A specification |
| 10 | Design ,Providing,Installation ,and Commissioning of Reverse Osmosis Base ( Capacity 1000LPH ) water purification Plant including Comprehensive operation and Maintenance for a period of one year on TURN KEY BASIS as per annexture A specification |
| 11 | Design ,Providing,Installation ,and Commissioning of Reverse Osmosis Base ( Capacity 2000LPH ) water purification Plant including Comprehensive operation and Maintenance for a period of one year on TURN KEY BASIS as per annexture A specification |
| 12 | Chiller Of 1 Tonn Capacity , Chilling Range Minimum Water Temp 12C Discharge of Water 200 to 250 Ltrs/Hour (Compressor Make - Emerson / Kirloskar) |
| 13 | Chiller Of 2 Tonn Capacity , Chilling Range Minimum Water Temp 12C Discharge of Water 450 to 500 Ltrs/Hour (Compressor Make - Emerson / Kirloskar) |
| 14 | Chiller Of 3 Tonn Capacity , Chilling Range Minimum Water Temp 12C Discharge of Water 750 to 800 Ltrs/Hour (Compressor Make - Emerson / Kirloskar) |
| 15 | Chiller Of 5 Tonn Capacity , Chilling Range Minimum Water Temp 12C Discharge of Water 1000 to 1250 Ltrs/Hour (Compressor Make - Emerson / Kirloskar) |
| 16 | Supply and installation of Plastic food grade drinking water tank 2/3 layers |
| 17 | design ,supply , installation at site of stainless steel 304 grade water tank of 0.6mm thickness with stand etc |
| 18 | WATER ATM CARD /multi COIN :- MS POWER COTAED BODY FOR LONGER LIFE LCD display of make like Water Pay/Proton/Aster/initiative |
| 19 | Raw water Pump :- 1.5M3/Hr.@30 METER HEAD,CENTRIFUGAL , MONOBLOCK,0.5 HP- SINGLE PHASE,KIRLOSKAR/CRI/CROMPTON/ALGO EQUIVALENT/Grundfose |
| 20 | Raw water Pump :-2.2 M3/Hr.@30 METER HEAD HEAD,CENTRIFUGAL , MONOBLOCK,1 HP- SINGLE PHASE,KIRLOSKAR/CRI/CROMPTON/ALGO EQUIVALENT/Grundfose |
| 21 | Water Softner :- 25mm suitable water softner -Supply voltage -110-240V , Power consumption -5 to 25 watt,application voltage -12V DC |
| 22 | RO membrane element :-4040 element ,SPIRAL ROUND,TFC -POLYAMIDE/ EQUIVALENT,HYDRANAUTICS,DUPONT,HYDRAMEN/DUKENEQUIVALENT,2500 GALLONS PER DAY, |
| 23 | RO membrane element : 8040 ELEMENTS,SPIRAL ROUND,TFC -POLYAMIDE/ EQUIVALENT,HYDRANAUTICS, DOW,HYDRAMEN/EQUIVALENT,2500 GALLONS PER DAY |
| 24 | PRESSURE Vessel 254 MM Dia X 1350mm HEIGHT , flow 3.5M3, Stainless steel 202. |
| 25 | PRESSURE Vessel FILTER 330 MM Dia X 1350mm HEIGHT , flow 3.5M3, Stainless steel 202. |
| 26 | PRESSURE vessel 254 MM Dia X 1350mm HEIGHT , flow 3.5M3, FRP composite. |
| 27 | PRESSURE SAND FILTER 330 MM Dia X 1350mm HEIGHT , flow 3.5M3, FRP composite |
| 28 | HIGH PRESSURE PUMP- 1.5HP |
| 29 | HIGH PRESSURE PUMP- 2HP |
| 30 | UV LAMP SYSTEM SS 304 I ( PICKLED , PASSIVATED AND ELECTROPOLISHED ) ,FLOW RATE @ 98% UVT EOL 1000LPH |
| 31 | Auto MPV (auto flush) 25NB |
| 32 | Lithium Iron Phosphate (LiFePO4) 12.8V and 72AH battery with five year warranty |
| 33 | Lithium Iron Phosphate (LiFePO4) 12.8V and 100 AH battery with five year warranty |
| 34 | supply installation testing and commisioing of solar panel comprising high efficiency poly/mono/multi crystalline photovoltaic cell 250Wp, 24V with five year cmc |
| 35 | Remote acess and monitoring system Flow indicator -function to measure flow rate (set of 3 ) at RO Feed, RO Product, Reject as per ann A |
| 36 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre.PWD SSR 2022-23 Sr.No 1119,item no 38.34 pg no.291 |
| 37 | For structure Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc. as per detailed design and drawing or as directed by engineer in charge including cutting fabricating hoisting erecting and fixing in position making riveted bolted welded connections and one coat of anti corrosive paint and over it two coats of oil painting etc. complete (MJP DSR 2023-24 Section F, Item No.6 page no. 46 ) |
| 38 | Providing & laying in situ Cement concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation & Footing of RCC columns & steel stanchions including normal dewatering, form work, compaction, finishing & curing, etc, complete. ( By weigh batching & mix design for M-250 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashri, etc. cement is permitted. ( Excluding M.. or Tor reinforcement ). MJP DSR 2023-2024 Section G SR No2 a) In RCC M - 250 |
| 39 | Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detaile. as per detailed designs,drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. FE500 (MJP SSR 2023-24 ,section G item no 8 ,page no 50 |
| 40 | Filling in plinth & floors murum bedding in trenches with approved murum from excavated materials from foundation. 15 cm to 20 cm layers including watering & compaction complete. ( 8.75-2.823= 5.927 Cum)(MJP DSR 2023-24 Sect. E Sr no.16 page no.45) Bd A10/263 |
| 41 | Providing ISI mark HDPE pipe of following class and dia including all local and central taxes, octroi, inspection charges, transportaion to stores, etc complete.HDPE Pipe 6Kg per Sq.cm (PWD Electrical DSR 2023-24 Item No. 16-5-16 page no -241) .With 5% rate hike as per point no 12 of PWD CSR 2022-23 (57+2.85)= 59.85 Dia.- 32 mm |
| 42 | Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, tees, reducers, clamps, etc. includingnecessaryexcavation, trench fillingetc.complete. Includingremoving existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete PWD CSR 2022-23 it.no.42.33 pg no. 345 |
| 43 | Supplying, installing and testing earthing with galvanised iron earth plate size 60 x 60 x 0.6 cm complete with all accessories of GI materials & recording the results as per specification No. EA-EP .PWD electrical DSR 2022-23 item no 9-1-1.pg no. 160 (4714+235.7)=4949 |
| 44 | PCC inside the Fencing - Providing & laying in situ following M150 C.C. of trap / granite/ gneiss metal for foundation & bedding including dewatering , form work , compacting & curing finishing etc. Complete inside solar tracker fencing ( MJP DSR 2023-24 Sect. G Item no 1b) |
| 45 | A) In soil Excavation for foundation in earth including excavated material up to distance of 50 m. and lift as below stacking spreading as directed dewatering showing and structing preparing the bed for foundation lift 0to1.5 m.(MJP DSR 2023-24 Sect. E page no.37)(Bd-A-1/259) |
| 46 | B) In Hard murum -Excavation for foundation in earth including excavated material up to distance of 50 m. and lift as below stacking spreading as directed dewatering showing and structing preparing the bed for foundation lift 0to1.5 m.(MJP DSR 2023-24 Sect. E page no.42)(Bd-A-1/259) |
| 47 | C) In hard murum & Bolder -Excavation for foundation in earth including excavated material up to distance of 50 m. and lift as below stacking spreading as directed dewatering showing and structing preparing the bed for foundation lift 0to1.5 m.(MJP DSR 2023-24 Sect. E page no.42)(Bd-A-1/259) |
| 48 | Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB .PWD electrical dsr 2022-23 , item no -5-3-6 .rate -(535+ (5% hike) = 561.75 |
| 49 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU.PWD electrical dsr 2022-23 , item no -7-2-8 .rate - 144+ 7.2(5% hike) =151.20 |
| 50 | Supplying and erecting fully automatic line Voltage stabilizer buck and boost type for operation on input voltage 160 to 270 V and output voltage 230 V + 1% rated for 5 kVA maximum load and with voltmeter, selector switch, 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16 A plug top complete with overload & short circuit protection.PWD electrical SSR 2022-23 item no 3-9-5 .Add 5% extra as per general note clause no -12. basic rate 10459+522 =10981 |
| 51 | Providing & Laying ISI mark G.I. pipe of following class and dia including all local and center taxes octroi, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. (MJP CSR 2023-24 Item NoI(III) Page.No. 93 ) ( 206+ 46 = 252) Dia.-25 mm |
| 52 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.PWD SSR 2022-23 item no 33.24 sr.no 1016 |
| 53 | Providing first class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints pointing in C.M. 1:3 and watering in pillars of rectangular or square shape as shown on the drawing or as directed etc.complete.PWD SSR 2022-23 ,sr no 900 ,item no 27.08 |
| 54 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.PWD SSR 2022-23 ,sr no 960 ,item no 32.02 |
| 55 | Providing & fixing board displaying information, such as Name of work, Tendercost, Name of Contractor, Work completion & liability period etc having rectangular shape of 1.20m × 0.90m size made out 18 gauge ( 1.25mm) thick mild steel sheet painted with one coat of Zinc chromat estoving primer and two coats of enamel paint on frontside and grey stove enamel on backside and border / messages / symbbols etc. with approved colours shade paint complete, on M.S. angle of size 35 × 35 × 3 mm frame with properly crossbraced M.S. angles of size 35 × 35 × 3 mm duly painted including Two M.S. angle iron posts of size 65mm × 65mm × 6mm,3.65 m long painted with alternate black and white band so 25cm width including all fixtures set c and fixing the board 1 : 4: 8 concrete block of size 60cm × 60cm × 75cm including, excavation, refilling, transportation and labour etc complete. Spec. No. As directed by Engineer in charge ( PWD DSR 2022-23,SSR Item no. 6.36, sr no. 289 Page No 71 ) |
| 56 | Supplying, installing, testing and commissioning of 3 kWp ON-GRID Solar PV System / Plant consisting solar PV poly crystalline panel (335 Wp X 09 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate,canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB ,MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net chargesfor RMS system, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per specification no. ESD-RT-ONG.item 4-5-1.Total 176159/-+ 8807(5%)=184966.PWD electrical 2022-23 |
| 57 | Supplying, installing, testing and commissioning of 5 kWp ON-GRID Solar PV System / Plant consisting solar PV poly crystalline panel (335 Wp X 15 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate,canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB ,MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net chargesfor RMS system, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per specification no. ESD-RT-ONG.item 4-5-2.Total 289867+5% (14493) =3043360.PWD electrical 2022-23 |
| 58 | Supplying, installing, testing and commissioning of 10 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 30 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net chargesfor RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG.item no 4-5-3.Total 544669+5%(27233)=571902.PWD electrical 2022-23 |
| 59 | Supplying, installing, testing and commissioning of 15 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 45 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with nterconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB ,MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG .item no 4-5-4.Total782473 +5%(39123)= 821596. Other than above mentioned capacity, for installation of on-grid solarPV plant, add Rs. 58720/- per kWp.PWD electrical 2022-23 |
| 60 | Puff Insulation 35-40 Kg/Cumt. Density.PWD DSR 2022-23 |
| 61 | Providing and fixing 15mmdiameter concussion push button type brass/gunmetal self- closing tap including necessary socket complete. PWD SSR 2022-23 item no 41.52 |
| 62 | Providing and fixing stainless steel sink of size 600 x 510 x 200mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.PWD SSR 2022-23 item no 42.78 |
| 63 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU.PWD electrical DSR 2022-23 item no 7-2-11 .Rate 365+5%=383.25 |
| 64 | System Erection with crane,MJP SSR 2021-22 Section B labor machinery. page no 15 serial no.12 |
| 65 | Providing,aupplying,fabricatingandfixing panel of aluminium composite panel cladding inapproved shape madeoutof 4mm thick ACP sheet material consisting of 3mmthickFRgrademineralcorefollowingNBCpart IVFireandlifesafety(having2hoursfireresistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between twoaluminiumsheets (each0.5mmthickofAA5005/AA3105grade)Thealuminiumcompositepanel claddingsheet shall becoil coatedwithkynar500basedPVDF/Lumiflonbased fluropolymer resin (having70:30 ratioof PVDFand acrylic)coatingof approvedcolour andsg=hadeon topfaceandpolymer (service)coatingofbottomface as specifiedusing stainless steel screws,nuts,bolts,washers,cleats,weathersilicon sealent,backer rods etc .overallweight of theACPshall not be less than7.5Kilogram/ One Square Metre PWD SSR 2022-23 , item no 51.1 |
| 66 | Acrylic Plain Sheet 3 mm .PWD SSR 2022-23 ,item 59 ,page no 674 |
| 67 | Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW .PWD electrical 2022-23.item no 1-7-3.Rate 494 +5% =518 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender