Tender For Repair/Maint & Painting Of Furniture (Wooden/Steel) And Charpoy At Af Stn Barnala Under Ge (Af) Halwara
Tender Value
25 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint & Painting Of Furniture (Wooden/Steel) And Charpoy At Af Stn Barnala Under Ge (Af) Halwara
BOQ
| Sl. No. | Item Description |
| 1 | boq47 |
| 2 | M & L for painting frame of chair verandah with white synthetic enamel paint after preparation of surface. (after removing the old cane) complete all as specified and as directed. |
| 3 | M & L for Gas welding to frame of chair verandah including preparation of surface and removing the unwanted welding spot all complete all as specified and as directed. |
| 4 | Supply and fixing in replacement of unserviceable portions of frame of Chair Verandah with 20mm conduit pipe of wall thickness 1.6mm duly gas welding complete all as specified and as directed. |
| 5 | CHAIR DINNING WOODEN BOTTOM (FD-225/228) :- M & L for removing old unserviceable seat of chair wooden bottom and supply and fixing new seat made out of ply wood commercial 6 mm thick with perforated holes and size as per drg and complete all as specified and as directed. |
| 6 | Supply and fixing in replacement rear leg of 1st class hard wood to Chair dining wooden bottom made to shape and complete including polishing to match all as specified and shown in drg and complete all as specified and as directed. |
| 7 | All as per Srl item No 2.01 here in before but front leg |
| 8 | All as per Srl item No 2.01 here in before but front rail, side rail, back rail |
| 9 | All as per Srl item No 2 .01 here in before but bottom stiffener |
| 10 | CHAIR DINNING CUSHIONED (FD/E6/MAP-II/04) :-Supply and fixing in replacement of rear leg of 1st class hard wood to Chair dining cushioned made to shape and complete including polishing to match complete all as specified and as directed. |
| 11 | M & L for removing of existing faded off tapestry cloth and cushion of seat of chair dining cushioned and Supply and fixing of new seat and cushion 75 mm thick , 32 density duly stiched with tapestry cloth of rate not less than Rs. 300/- per meter complete all as specified and as directed. |
| 12 | CHAIR DINNING (FD-279) :Supply and fixing in replacement of rear leg of 1st class hard wood to Chair dining made to shape and complete including polishing to match all as specified and shown in drg complete all as specified and as directed. |
| 13 | All as per Srl item No 4 .00 here in before but front leg |
| 14 | All as per Srl item No 4 .00 here in before but front rail, side rail, back rail |
| 15 | All as per Srl item No 4 .00 here in before but bottom stiffener |
| 16 | All as per Srl item No 4 .00 here in before but back rest |
| 17 | All as per Srl item No 4.00 here in before but cane stiffeners rest |
| 18 | CHAIR DINNING JCO/ORS (FD/MAP-II/05) - :Removing old unsv /broken PVC seat and Supply and fixing with new seat made of 6 mm thick ply wood with cushion 75 mm thick ,32 density duly stiched with tapestry cloth of rate not less than Rs 300 /- per mtr as approved the ply wood shall be fixed to wooden corner bracket of size (100 x 100 mm ) x 25 mm qty +04 Nos fixed on all inner corners of the seat complete all as specified and as directed. |
| 19 | All as per Srl item No 5 .00 here in before but rear leg |
| 20 | All as per Srl item No 5 .00 here in before but front |
| 21 | All as per Srl item No 5 .00 here in before but bottom/side/centre stiffner |
| 22 | CHAIR WRITING (FD-250 & 280) :-Supply and fixing in replacement of rear leg of 1st class hard wood to chair writing made to shape and complete including polishing to match all as specified and shown in drg complete all as specified and as directed. |
| 23 | All as per Srl item No 6.00 here-in-before but front legs. |
| 24 | All as per Srl item No 6.00 here-in-before but arm rest. |
| 25 | All as per Srl item No 6.00 here-in-before but side, front & back rail rest. |
| 26 | All as per Srl item No 6.00 here-in-before but back rest. |
| 27 | All as per Srl item No 6.00 here-in-before but stiffner (Side & central one). |
| 28 | CHAIR EASY (FD-201 & 229) :- Supply and fixing in replacement of rear leg to chair easy of 1st class hard wood made to shape and size complete including polishing to match all as specified and shown in drg and complete all as specified and as directed. |
| 29 | All as per Srl item No 7.00 here-in-before but front leg. |
| 30 | All as per Srl item No 7.00 here-in-before but front batten. |
| 31 | All as per Srl item No 7.00 here-in-before but back batten. |
| 32 | All as per Srl item No 7.00 here-in-before but arm rest. |
| 33 | All as per Srl item No 7.00 here-in-before but front & back rail of seat/back. |
| 34 | CHAIR REVOLVING /CHAIR COMPUTER (TP) :- Supply and fixing in replacement of seat of chair visitor 75mm thick foam 32 density with new tapestry cloth in dark colour as approved. Cost of tapestry cloth not less than Rs. 300/- per meter complete all as specified and as directed. |
| 35 | All as per Srl item 8.00 here in before but back of chair revolving |
| 36 | Supply and stitching in replacement tapestry cloth of seat & back of chair revolving with new tapestry cloth in dark colour not less than Rs 300/- per meter as approved all as per sample complete all as specified and as directed. |
| 37 | Supply and fixing in replacement of arms of chair revolving all as per sample complete all as specified and as directed.. |
| 38 | supply and fixing in replacement base of chair with all wheels complete all as specified and as directed. |
| 39 | Supply and fixing in replacement hydraulic system of chair revolving complete all as specified and as directed. |
| 40 | Supply and fixing in replacement wheels of chair revolving complete all as specified and as directed. |
| 41 | CHAIR WRITING STEEL OFFICER (TP) :-Supply and fixing in replacement seat & Back of chair writing 75mm thick foam 32 density with new tapestry cloth in dark colour as approved . Cost of tapestry cloth not less than Rs. 300/- per meter complete all as specified and as directed.. |
| 42 | All as per Srl item 9.00 here in before but back of chair writing. |
| 43 | Supply and stitching in replacement chair writing tapestry cloth in dark colour not less than Rs 300/- per meter as approved all as per sample complete all as specified and as directed. |
| 44 | Supply and fixing in replacement of arms of chair writing all as per sample complete all as specified and as directed. |
| 45 | M & L for Gas welding to frame of chair writing including preparation of surface and removing the unwanted welding spot complete all as specified and as directed. |
| 46 | M & L for painting to frame of chair writing with black synthetic enamel paint including preparation of surface complete all as specified and as directed. |
| 47 | CHAIR TUBULAR STEEL WITH ARMS (FD-75) :-Materail and labour for modification of seat of chair Tubular steel with arms by providing seat made of 75 mm thick cushion, 32 density duly covered with rexine of approved shade to be fixed over 6mm thick plywood commercial as per sample and complete all as specified and as directed. |
| 48 | All as per Srl item 10.00 here in before but back of chair tubular steel without arms |
| 49 | All as per Srl item 10.00 here in before but back of chair tubular steel with arm to be made out of 50 mm thick cushion of 32 density fixed on commercial ply 6 mm thick. |
| 50 | All as per Srl item 10.00 here in before but back of chair tubular steel with out arm to be made out of 50 mm thick cushion of 32 density fixed on commercial ply 6 mm thick. |
| 51 | M & L for Gas welding to frame of chair tubular steel including preparation of surface and removing the unwanted welding spotcomplete all as specified and as directed. |
| 52 | M & L for painting to frame of chair tubular steel with/ with out Arms with black synthetic enamel paint including preparation of surface complete all as specified and as directed. |
| 53 | CANNING:- Material and labour in repair re-canning of chairs or other articles of Chair dinning, chair easy, chair writting ,stool dressing, binsolid linen etc with best quality plastic cane 2mm wide including removal of old cane complete all as specified and as directed. |
| 54 | BED HARD WOODEN PLY TOP (FD-246) :-Supply and fixing in replacement head board of bed plytop complete all as specified and as directed. |
| 55 | Supply and fixing in replacement foot board of bed plytop complete all as specified and as directed. |
| 56 | Supply and fixing in replacement teak wood long rail 35x90mm of bed ply top complete all as specified and as directed. |
| 57 | Supply and fixing in replacement teak wood short rails 60x60mm joining the long rails complete all as specified and as directed. |
| 58 | Supply and fixing in replacement teak wood stiffener 40x60mm joining long rails of bed ply topcomplete all as specified and as directed. |
| 59 | Supply and fixing in replacement 35x5 mm flat iron MS bent to right angle at the corner of bed plywood complete all as specified and as directed. |
| 60 | Material and labour in replacement plywood 12mm thick commercial ply 6'x3' complete all as specified and as directed. |
| 61 | BED HARD IP STEEL (FD/E6/MAP-05) :-Supplu & Fixing in replacement12mm thick, Phenol commercial ply 6.5' x 3' on top fitted with screws of suitable size complete all as specified and as directed. |
| 62 | Supply and fixing in replacemnt 18 mm thick prelaminated board with PVC edging 6mm thick fixed with screws of suitable size complete all as specified and as directed. |
| 63 | M & L for welding of joints of iron components i.e 1.2 mm thick, 38mm square conduit pipe of Bed hard steel |
| 64 | TABLE DINNING 6/8 PERSONS (FD-273) :-Supply and fixing in replacement leg of table dinning 6/8 persons complete all as specified and as directed. |
| 65 | Supply and fixing in replacemnt long rails of table dining 6/8 pers complete all as specified and as directed. |
| 66 | Supply and fixing in replacemnt short rails of tabled dinning 6/8 pers complete all as specified and as directed. |
| 67 | Supply and fixing in replacemnt of top of table dining 6/8 pers complete all as specified and as directed. |
| 68 | TABLE WRITING 3'x2' with /with out drawer (FD-275/249) -Supply and fixing in replacement teak wood legs in of table writing complete all as specified and as directed. |
| 69 | Supply and fixing in replacement teak wood long rails complete all as specified and as directed. |
| 70 | Supply and fixing in replacement teak wood short rails complete all as specified and as directed. |
| 71 | Supply and fixing in replacement teak wood bottom stiffeners complete all as specified and as directed. |
| 72 | Supply and fixing in replacement 18 mm thick Top of prelaminated particle board with PVC edging 6 mm thick complete all as specified and as directed. |
| 73 | Supply and fixing in replacement box including drawers . The box shall be made of 12 mm thick ply board at the back which shall be 6mm thick commercial plywood complete all as specified and as directed. |
| 74 | TABLE DRESSING LADIES WITH MIRROR (FD-E6/MAP-II/07) :-Removing the existing damage mirror and plywood back of table dressing Ladies and S&F new electro copper plated mirror of polished sheet glass of size 1200x 390 mm not less than 5.5 mm thick including fixing to existing wooden frame and replacing the damaged plywood with 8 mm thick BWR grade plywood complete all a specofied and directed. |
| 75 | Supply and fixing in replacement drawers made out of 12mm thick plywood duly covered with teak veneered sunmica sheet 1mm thick from front. Side of the drawer shall be 12mm thick commercial plywood. The bottom and back of the drawer shall be 6mm thick commercial ply. |
| 76 | Removing the existing faded off tapstry cloth from cushion of dressing stool of table dressing ladies and S&F new trapstry cloth of cost not less then Rs 300/- per meter of approved quality all as shown on drg and complete all as specified and as directed. |
| 77 | Supply and fixing in replacement of knob as per sample approved by GE complete all as specified and as directed. |
| 78 | TABLE COMPUTER (FD-E6/MAP/03) :-Material and labour in replacement top of table computer made out of 18mm thick prelaminated MDF Board with PVC edging 6mm thick fixed with screws of suitable size complete all as specified and as directed. |
| 79 | Supply and fixing in replacement of MS telescopic channels for drawers and sliding trays of table computer complete all as specified and as directed. |
| 80 | S&F in replacement Foam cushion 32 density for seat and back of sofa set of size 22’’ x 21’’ x 4\\" thick duly stitched with new tapestry cloth not less than Rs 300/- meter as approved complete all as specified and as directed. |
| 81 | TABLE CENTRE (FD-235/274) :-Material and labour in replacement leg of table centre made of sheesham of size as shown on drg complete all as specified and as directed.. |
| 82 | Material and labour in replacement stiffener of table centre made of sheesham of size as shown on drg complete all as specified and as directed. |
| 83 | Material and labour in replacement top of Table Centre made out of 18mm thick prelaminated Particle Board withTW edging 6mm thick complete all as specified and as directed. |
| 84 | TABLE PEG (FD-236/277) :-Material and labour in replacement leg of table peg made of sheesham of size as shown on drg complete all as specified and as directed.. |
| 85 | Material and labour in replacement stiffener of table peg made of sheesham of size as shown on drg complete all as specified and as directed.. |
| 86 | Material and labour in replacement rail of table peg made of sheesham of size as shown on drg complete all as specified and as directed. |
| 87 | Material and labour in replacement top of Table Peg and made out of 18mm thick prelaminated Particle Board withTW edging 6mm thick complete all as specified and as directed. |
| 88 | TEA POY WOODEN (FD-232/278) :-Material and labour in replacement leg of teapoy wooden made of sheesham of size as shown on drg complete all as specified and as directed.. |
| 89 | Material and labour in replacement stiffener of teapoy wooden made of sheesham of size as shown on drg complete all as specified and as directed. |
| 90 | Material and labour in replacement rail of teapoy wooden made of sheesham of size as shown on drg complete all as specified and as directed. |
| 91 | Material and labour in replacement top of Teapoy wooden made out of 18mm thick prelaminated Particle Board withTW edging 6mm thick complete all as specified and as directed. |
| 92 | ALMIRAH LARGE STEEL WITH SHELVES (FD-1031): Supply and fixing in replacement MS clamps with nut bolts or welding as per the drawing complete all as specified and as directed. |
| 93 | All as per Srl item No. 22.00 here-in-before but lock of 6 lever Make: Link/Godrej/Standard/Aligarh. |
| 94 | All as per Srl item No 22.00 here in before but CP handle 100mm with bolts |
| 95 | All as per Srl item No 22.00 here in before but 3 way Locking device with MS rods and cover box |
| 96 | All as per Srl item No 22.00 here-in-before but MS shelf made to shape out of 1mm thick MS sheet as shown on drawing. |
| 97 | All as per Srl item No 22.00 here-in-before but base channel of size 485 x 80 x 100 mm to be welded at 50mm from each end of length |
| 98 | All as per Srl item No 22.00 here in before but MS shutter made to shape as per the drg, complete all as specified and directed. |
| 99 | All as per Srl item No 22.00 here in before but MS Butt hinges 75mm |
| 100 | ALMIRAH MEDIUM STEEL WITH SLEVES (FD-243/1032): Supply and fixing in replacement MS clamps with nut bolts or welding as per the drawing complete all as specified and as directed. |
| 101 | All as per Srl item No. 23.00 here-in-before but lock of 6 lever |
| 102 | All as per Srl item No 23.00 here in before but CP handle 100mm with bolts |
| 103 | All as per Srl item No 23.00 here in before but 3 way Locking device with MS rods and cover box |
| 104 | All as per Srl item No 23.00 here-in-before but MS shelf made to shape out of 1mm thick MS sheet as shown on drawing. |
| 105 | All as per Srl item No 23.00 here-in-before but base channel of size 485 x 80 x 100 mm to be welded at 50mm from each end of length |
| 106 | All as per Srl item No 23.00 here in before but MS shutter made to shape as per the drg. |
| 107 | All as per Srl item No 23.00 here in before but MS Butt hinges 75mm |
| 108 | LOCKER BED SIDE STEEL (FD-257/1029): Supply and fixing in replacement CP Hasp and staple 75 mm long as approved by GE with nut bolts as per the drawing complete all as specified and as directed. |
| 109 | All as per Srl item No 24.00 here in before but Handle CP 100mm long with bolts |
| 110 | All as per srl item No 24.00 here in before but MS shelf made out of 1 mm thick sheet |
| 111 | All as per Srl item No 24.00 here in before but leg of size 600 x 80x 100mm made out of 1mm thick MS sheet |
| 112 | All as per Srl item No 24.00 in before but shutter made out of 1mm thick MS sheet |
| 113 | Table Bed Side (FD/E6/MAP/15® ) :- S&F in repairs ,top of size 450x450mm made out of 18 mm thick Plywood with 1 mm sunmica fixed over it, the beading 6 mm thick shall be fixed on all open edges complete all as specified and as directed. |
| 114 | S&F in repair side made out of 18 mm Plywood covered with 1 mm thick sunmica sheet and Ist Class hard wood 6 mm thick beading as per drawing complete all as specified and directed . |
| 115 | Supply and fixing in replacement of MS telescopic channels for slidding drawers of table Bed side complete all as specified and as directed. |
| 116 | Material and labour for repainting of below mentioned steel furniture as per the following steps:- Almirah Larze Steel (FD-1031) (i) denting of bent surfaces with the help of hammer in best workmanship manner. (ii) removing old paint by scrubbing with sand paper 150 No thoroughly. (iii) applying one coat of metal primer (iv) Applying metal putty to even the surface. wait period of 2 - 3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No sand paper and spraying little amount of water simultaneously. (v) wipe the surface with soft dry cloth and apply one coat of synthetic enamel paint of light shade as approved by GE complete all as specified and as directed. |
| 117 | All as per ser Item No.26.00 but Almirah medium steel with shelves(FD-1032) |
| 118 | All as per ser Item No. 26.00 but Locker Bed Side Steel (FD-1029) |
| 119 | All as per ser Item No. 26.00 but Table Office Clk Steel (FD-1004) |
| 120 | All as per ser Item No. 26.00 but Table Office officer Steel (FD-1004) |
| 121 | All as per ser Item No. 26.00 but Bed IP Steel (FD/E6/MAP/08) |
| 122 | All as per ser Item No.26.00but Table bedside steel Portion (FD/E6/MAP/15) |
| 123 | All as per ser Item No.26.00 but Table computer Steel Portion (FD/E6/MAP/03) |
| 124 | Material and labour for polishing of below mentioned wooden furnitures as per the following steps:- Chair Easy (i) Preparing the surface by sanding with sand paper of 120 - 220 grit along the grains to get smooth surface. (ii) wiping the wood with soft cloth to remove any dust and prepairing for staining. (iii) Applying the stain along the grains with the help of a brush/ clean rag. apply the stain evenly and 2 - 3 times allowing the wood to dry in between each staining. (iv) Lightly sand down the wood surface with sand paper of 320 grit finally apply the laquer to get a smooth and glossy finish. |
| 125 | All as per ser Item No.27.00 but Chair writing (FD-280) |
| 126 | All as per ser Item No.27.00 but Table Peg (FD-236/277) |
| 127 | All as per ser Item No.27.00 but Teapoy wooden (FD-232/278) |
| 128 | All as per ser Item No.27.00 but Table writing (FD-249/275) |
| 129 | All as per ser Item No.27.00 but Sofa set 5 seater (FD-258/281) |
| 130 | All as per ser Item No.27.00 but Bed hard wooden (FD-246) |
| 131 | REPAIR TO CHARPOY GI PIPE FD-220) :-Taking down unserviceable broken long rail and S&F new long rail of charpoy made out of GI Pipe 32mm bore medium grade including threading complete all as specified. |
| 132 | Taking down unserviceable broken short rail of charpoy GI pipe, making threading & fixing the short rail complete all as specified. Note:- Short rail shall be made from long rail obtaion from serial items No.28.00 above. |
| 133 | Taking down unserviceable broken leg of charpoy GI pipe making threading and fixing the leg. The bottom of legs shall be provided with GI cap of 32mm (Plug) complete all as specified.Note:- (leg shall be made from long/short rail obtained from serial items No .28.00 & 28.01 above) |
| 134 | Taking out unserviceable elbow 3way 32mm bore of charpoy GI pipe and S & F new elbow 3 way 32mm medium weight complete all as specified. |
| 135 | Taking out unserviceable/ broken check nut of charpoy GI pipe and S & F new GI check nut 6mm thick suitable for charpoy GI Pipe 32mm bore complete alll as specified. |
| 136 | Welding in repairs with continuous running welding joints complete all round of GI pipe 32mm bore long/ short rail of legs welded in proper position all as specified and directed. |
| 137 | REPAIR TO CHARPOY PLY TOP :- S&F in replacement of plywood commercial 12mm thick of size 1980x900mm, grade BWR, type BB and fixed to frame of Charpoy GI pipe with 08 Nos GI nut bolt 6mm dia, 62 to 65mm long with washer at both ends and nuts 02 Nos on each rail and square tube including tightning of all joints of charpoy complete all as specified and directed. |
| 138 | CHARPOY IP STEEL (FD/E6/MAP-II/01) :- S&F in replacement of plywood commercial 9mm thick of size 1940x850mm, grade BWR, type BB and fixed to frame of Charpoy IP steel with 08 Nos GI nut bolt 6mm dia 62 to 65mm long with washer at both ends and nuts 02 Nos on each rail and square tube including tightning of all joints of charpoy complete all as specified and directed. |
| 139 | CHARPOY FOLDING IP WITH HARD TOP FD-385) :- S & F in replacement of plywood commercial 9mm thick of size 990x830mmx02Nos, grade BWR, type BB and Fixed to frame of Charpoy IP Folding with 07 Nos GI nut, bolt 6mm dia 62 to 65mm long with washer at both ends and nuts 02 Nos on each rail and tube complete all as specified. All as per Srl item No 24.00 in before but shutter made out of 1mm thick MS sheet Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender