Short Dated Tender - Tender For Repairing And Maintenance Works At Dav School For Dav Sports Meet 2026 27 At Bishrampur Colony Of Bishrampur Area
Tender Value
5.20 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
1 days left
EMD
6600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surajpur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short Dated Tender - Tender For Repairing And Maintenance Works At Dav School For Dav Sports Meet 2026 27 At Bishrampur Colony Of Bishrampur Area
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of grass and removal of rubbish upto a distance 50 mtr outside the periphery of the area cleared as per istruction of engineer in charge. |
| 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC ) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with o ne step C PVC solvet cement and testing of joints com plete as per direction of Engineer in Charge. (Internal work Exposed on wall)20 mm nominal outer dia .Pipes. |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC ) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with o ne step C PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)25 mm nominal outer dia .Pipes. |
| 4 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 5 | Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98mm long, Weighing not less than 75 gms. |
| 6 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. |
| 7 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 8 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 40mm dia |
| 9 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length. 15 mm nominal bore. |
| 10 | Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 11 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592, Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. (i) Single socketed pipes :75 mm diameter |
| 12 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes confirming to IS: 13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Bend 87.5°. 75mm bend. |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592, Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. (i) Single socketed pipes :110 mm diameter |
| 14 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes confirming to IS: 13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Bend 87.5°. 110 mm bend. |
| 15 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 16 | Dismantling and disposal of WC Pan and its rubbish of any size and lead of 50 metre all complete as per instruction of as per Instruction of Engineer In Charge. |
| 17 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 18 | Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth up to 30 cm measured at a height of 1 m aboveground level and removal of rubbish up to a distance of 50 m outside theperiphery of the area cleared |
| 19 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275gm/sqm |
| 20 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet |
| 21 | Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth Cement Mortar 1:4 ( 1 cement : 4 coarse sand) |
| 22 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine/coarse sand). |
| 23 | White washing with lime to give an even shade :Old work (two or more coats) |
| 24 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 25 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. |
| 26 | Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required,to achieve even shade and colour.Two coats |
| 27 | Transportation and disposal of garbage, building rubbish, domestic waste matterial and vegitation etc by tractor including loading and unloading etc upto a lead of 5.00 km and dumped at suitable place instructed by engineer in charge. |
| 28 | Cleaning /clearing chowked sewer line, and chambar including removal of slab and refixing the same,disposal of night soil up to a lead of 200 .00 Mtr all complete ,as per insruction of Engineer -in-charge. |
| 29 | Cleaning of septic tank including disposal of garbage manually / Machnically as per instruction of Enggr incharge.( 20 to 50 user) |
| 30 | Cleaning of surface drain including disposal of muck/ sludge through trolly or other arrangements to as specified place within a lead of 100.00 mtr complete with all tools, tackles as per istruction of engineer in charge. Above 250 mm and upto 500mm wide. |
| 31 | Cleaning of roof water tank including drain out water, cleaning, disinfecting the tank by bleaching powder etc and washing the tank with fresh water, writing the date of cleaning by paint on the outer face of tank all complete with tools and tackels and consumable as per Instruction of Engineer in Charge. |
| 32 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender