Tender For Upgradation Of Bunglow No. Mq-6 At M.A Road Srinagar.
Tender Value
9 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
14 days left
EMD
18000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Bunglow No. Mq-6 At M.A Road Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area of 3 sqm. and below |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area beyond 3 sqm. |
| 3 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm |
| 4 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood. |
| 5 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 6 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood |
| 7 | Providing and fixing of imported wooden panelling lining on walls, ceilings tongued and grooved planks including cost of ground work of 12mm to 10mm (as per requirement) thick ply 50mm wide 600mm*600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost of nails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete (12mm thick) |
| 8 | Polishing on wood work with touch wood polish (One or more coats) including preparing of surface by cleaning and sand papering |
| 9 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 11 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 12 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead |
| 13 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles (Digital Series) conforming to IS: 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of size 1200x600 mm as approved by Engineer-in-Charge, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete |
| 15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 16 | Providing and fixing Chromium plated (CP) sanitary fittings of approved quality (Cera, Jaquar, Parko Make or equivalent) complete job |
| 17 | Angle Valve |
| 18 | Angle Valve (2 in 1) |
| 19 | Wash Basin mixer . |
| 20 | Wall mixer (3 in 1) |
| 21 | Towel Ring 20 mm dia |
| 22 | Towel Rail single 600 mm long |
| 23 | Health Faucet with required Chain Tube |
| 24 | Grating 100 mm dia |
| 25 | Grating 75 mm dia |
| 26 | Providing and fixing toilet paper holder C.P. brass |
| 27 | Tumbler Holder |
| 28 | Soap Case |
| 29 | Over Head Shower arm 305 mm |
| 30 | Jet Pin for W.C with Chain Tube |
| 31 | Wall Soap Dispensers Manual |
| 32 | Corner Shelves |
| 33 | Bib Cock |
| 34 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:-W.C. pan with ISI marked white solid plastic seat and lid. |
| 35 | P/F PVC connections for gysers all complete job. |
| 36 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 37 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete : 2 mm thick |
| 38 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 39 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of :G.S. Sheet |
| 40 | Providing High Rib Profiled sheet of green colour roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diamater with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram /m2 |
| 41 | Providing and fixing of HDF (AC4 type) wooden flooring. cladding approved brand and quality sample to be got approved by in charge engineer at site over 4 to 6 mm thick PVC thermo coal foam base Including Providing and fixing of matching imported wooden Cornice Beading for edges with all necessary fittings and fixtures etc. including all carriages complete as per the directions of in charge engineer at site. |
| 42 | Providing and Fixing of glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 3.5 to 4.00 mm (weight not less than 10kg/sqm).wherever required as per the directions of E.I.C |
| 43 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm |
| 44 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 150x58x1.90 mm |
| 45 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 150x10 mm |
| 46 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 100x10 mm |
| 47 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm |
| 48 | Providing and fixing bright finished brass hard drawn hooks and eyes .150 mm |
| 49 | Carriage for different material from source upto site of work. |
| 50 | Sand for an average lead of 20 Kms |
| 51 | Engagment of TATA MOBILE for disposal of dismantled material out of the MuncipleLimts along with loading and un loading of material . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender