Tender For Construction Of Toilet Blocks For Disable And Transgender M And F At Jmfc Court Complex, Sinapali_Building
Tender Value
8.65 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
9 days left
EMD
8659
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nuapada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet Blocks For Disable And Transgender M And F At Jmfc Court Complex, Sinapali_Building
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil with all lead & lift including dressing & levelling the bed of the foundation to the required width & depth & stacking the excavated materials away from the working areas as per the direction of E.I.C. |
| 2 | Supplying, filling in foundation and plinth with sand in layers not exceeding 23cum (9\\") thick including watering and ramming with the cost, conveyance, royality, taxes of all materials, labour, T & P required for the Work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 3 | Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2\\") size clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\\") thick to the required level ramming watering and curring etc. complete including cost and conveyance of all materials with all taxes and royalities and all labour with T & P required for the work etc. complete including dewatering if required as per specification and direction of the Engineer-in-Charge. |
| 4 | Brick work with Fly Ash Bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance +/- 8 percent in cement mortar (1:6) in Foundation & Plinth etc. complete as per specification and direction of the Engineer-in-Charge. |
| 5 | Brick work with Fly Ash Bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance +/- 8 percent in cement mortar (1:6) in Superstructure etc. complete as per specification and direction of the Engineer-in-Charge. |
| 6 | Cement concrete (1:2:4) using 12mm hard granite crusher broken metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge. |
| 7 | Providing and laying RCC M-20 grade using 20 mm and downgraded size hard black broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concerete and compacting by using vibrators watering and curring for 4 weeks centering and shuttering and finishing the exposed surface smooth providing grooves of beads where necessary including cost, conveyance, royalities and taxes of all material and labour required for the work etc. complete excluding cost and conveyance of M.S. Rod or steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting etc of the M.S. rods or tor steel and tying grills and placing in proper position as per specification and direction of the Engineer-in-charge. work with minimum compressivee strength in work test of 150kg/cm2 in 15cm cum cubes at 28 days cost and conveyance of M.S. Rod or steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting etc of the M.S. rods or tor steel and tying grills and placing in proper position as per specification and direction of the Engineer-in-charge. 7.10-Column Base & Footing |
| 8 | Column up to Plinth beam level |
| 9 | Plinth Band |
| 10 | Column & Beam |
| 11 | Roof Beam |
| 12 | Lintel Beam |
| 13 | Chajja |
| 14 | Roof Slab |
| 15 | Straightening bent up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and tying the grills hoisting lowering and placing in proper position as required for RCC works with cost, conveyance and taxes of M.S. Rods or Tor steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. (Weight of binding wires will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only). |
| 16 | Supplying, fitting and fixing of M.S. windows and door shutters and collapsible gate with top and bottom rails in proper position including cost, conveyane, royalty and taxes of all materials, T & P articles requried for the work etc complete as per specification and direction of the Engineer-in-Charge. |
| 17 | Labour for fitting and fixing of M.S. windows and door shutters and collapsible gate with top and bottom rails in proper position including making holes in walls in proper position including making holes in walls RCC structure and wood work etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with RCC (1:2:4) with hard black broken granite stone chips of 12mm to 20mm (1/2\\" to 3/4\\") (20mm not to exceed 25% ) with cost, conveyane, royalty and taxes of all materials, labour, T & P articles requried for the work etc complete as per specification and direction of the Engineer-in-Charge. |
| 18 | Supplying, fitting & fixing of WPC type door for toilet with laminate as per specification including cost of all materials and labour charges. |
| 19 | Providing 16 mm thick cement plaster (1:6) finished smooth to inside surface of brick walls after racking out the joints including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 20 | Providing 12mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curring with cost and conveyancec of all materials and labour with T & P required for the work with all taxes and royalities etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 21 | Fixing vetrieied tiles in floors of size 600 mm x 600 mm on 25 mm thick bed of cement morter (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete. |
| 22 | Fixing vetrieied tiles in Dados on 12 mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete. |
| 23 | Finishing surface of walls with one coat of cement based wall putty (water based ) ,cement primer & plastic emulsion paint of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials , taxes , labour with T & P etc. complete as per E.I.C. |
| 24 | Priming one coat with any approved primer over plastered surface as per direction of the Engineer-in-charge. |
| 25 | Wall painting 2 coats with plastic emulsion paint over a coat of primer of approved shade on new work to give an even shade. |
| 26 | Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of paint. |
| 27 | Painting two coats of enamel paint to new wood work and iron work including cost of paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 28 | Fixing marble tiles (above 0.4 sqm to 1.0 sqm) in treads & steps on 25 mm thick bed of cement morter (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete. |
| 29 | Fixing chequered tiles in floors on 25 mm thick bed of cement morter (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete. |
| 30 | ElectricalRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Havels /HPL/ V Guard ) A) -do- Group A |
| 31 | -do- Group B |
| 32 | -do- Group C |
| 33 | Recessed wiring to Exhaust Fan Point in -do- Group B |
| 34 | S/F of Angle holder replacing Ceilling Rose (1.29-1.28) |
| 35 | Switch BoardsS/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 36 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 37 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 38 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 39 | 2 Modular box with base & cover |
| 40 | 12 Modular box with base & cover |
| 41 | Sub-Main2x1.5+1x1.5 (1.8.1) |
| 42 | 2x2.5+1x1.5 (1.8.2) |
| 43 | 2x4+1x1.5 (1.8.3) |
| 44 | 2x6+1x2.5 (1.8.4) |
| 45 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 46 | Circuit Breakers & BDBS/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 47 | S/F of \\"C\\" Series 2 pole MCB of 63 A amp rating (As per direction of engineer in charge) 240 volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection,Testing and commissioning etc as required without MCB box |
| 48 | S/F of MCB 8 way Single door (2.3.2) |
| 49 | Main switchesS/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 50 | EarthingEarthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 51 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 52 | FittingsS/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton Trans Air12 reversible Havells Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient Power Flow DBB) |
| 53 | S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories and connection (make Havels/HPL/Crompton/Polycab/PAC) |
| 54 | S/F of 20-25 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 55 | S/F of 12w Watt LED Bulb |
| 56 | PH WORKSSupplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia.U-PVC SWR pipes |
| 57 | (k)75mm dia.PVC SWR door bend |
| 58 | (b)110mm dia.U-PVC P-trap |
| 59 | (c)110mm dia.U-PVC SWR Double junction door |
| 60 | (d)110mm dia.U-PVC SWR Single junction door |
| 61 | (e)110mm dia PVC SWR Nahani trap without Jally |
| 62 | (f)110mm dia.U-PVC SWR plain bend |
| 63 | (g)110mm dia.U-PVC SWR vent cowl |
| 64 | (h)125mm dia CP greatings |
| 65 | (i)75mm dia.U-PVC SWR pipes |
| 66 | (j)75mm dia.PVC SWR plain bend |
| 67 | (l) 5mm dia.PVC SWR Plain Tee |
| 68 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.(b)250mm thick wall |
| 69 | Supplying all materials,labour,T&P and fixing water closet,squatting pan (Indian type W.C pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification and direction of the E.I.C.(a)580mm size Orissa pan(Nycer/Cera/Hindware/Parryware) |
| 70 | Supplying all materials,labour,T&P and fixing wash down water closet(E.W.C)with integral S or P trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(a)EWC with P & S trap plain (Nycer/Cera/Hindware/Parryware) |
| 71 | Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 72 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHB(Neycer/Parrywear/Cerra/Hindware) |
| 73 | Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10 lit PVC L/L Cistern(Parry ware) |
| 74 | Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete |
| 75 | Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete |
| 76 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(b)25mm dia U-PVC Pipe(External) |
| 77 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.(a)In Ground Floor |
| 78 | Supplying all materials,labour,T&P and cutting holes in RCC,floors,roof,etc.upto 19cm thick for passing GI/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.(a)In Ground Floor |
| 79 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.(a)In Ground Floor |
| 80 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(a)15mm dia CP SB Bib cock |
| 81 | (b)15mm dia CP Two way Bib cock |
| 82 | (c)15mm dia CP Angle stop cock |
| 83 | (d)15mm dia CP Pillar stop cock |
| 84 | (e)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 85 | (f)25mm dia PVC F.W.V. |
| 86 | (g)15mm dia CP Flange Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender