Tender For E-Tender For (A) Essential Repair Of Holding Area, Installation Of Baffle With Allied Works And Electrical Repairing Work And (B) Reconstruction Of Collapsed Section Of The Left-Side Wall,Repair Of Floor, Cleaning/Removal Of Debris At Shoo
Tender Value
3.14 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
6500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E-Tender For (A) Essential Repair Of Holding Area, Installation Of Baffle With Allied Works And Electrical Repairing Work And (B) Reconstruction Of Collapsed Section Of The Left-Side Wall,Repair Of Floor, Cleaning/Removal Of Debris At Shooting Range- C Within The Compound Of Pts, 247, A.J.C. Bose Road, Kol-700027.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Sep-2026 | Date corrigendum | Date | 08-Sep-2026 |
| 2 | 09-Sep-2026 | Revised Date Extension Corrigendum | Date | 18-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | (a) Essential repair of Holding area, Installation of baffle with allied works and electrical repairing work. (b) Reconstruction of collapsed section of the left-side wall,repair of floor, cleaning/removal of debris at Shooting Range- C within the compound of PTS, 247, A.J.C. Bose Road, Kol-700027. |
| 2 | M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc.(length of straight not less than 230 mm) |
| 3 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. |
| 4 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 5 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials . |
| 6 | Rough dressed timber planks fitted and fixed with nut bolts excluding framework complete :In ground floor (iii) 50mm thick planks (b) Sal Local |
| 7 | (B) Dressed wood work in post , plate , battens . etc. fitted & fixed complte (excluding the cost of bolts only, but including the cost of nails, scrw etc.) (ii) Sal : Local. |
| 8 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping].In Ground Floor (vi) 19mm |
| 9 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. |
| 10 | Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). |
| 11 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 20 mm. thick |
| 12 | Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor @ 1st floor |
| 13 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including round off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 20 mm thick plaster |
| 14 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer |
| 15 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality |
| 16 | (a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 17 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.(a) On timber or plastered surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 19 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (b) On steel or other metal surface(iv) Two coats (with any shade except white) |
| 20 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties@ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. a) Height 3.90 m |
| 21 | Mazdoor (Male) |
| 22 | Uprooting and removing plants from the surface of walls parapet etc. and making good damages. Repairing of damages to be paid separately. (a) Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr. |
| 23 | (b) Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr. |
| 24 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 25 | Supply and fixing 220volt outdoor type flood light set as required |
| 26 | (a) Distribution wiring in 2x2.5 sqmm single core PVC insulated stranded Copper wire in 19 mm EI conduit/GI conduit from separate way of BDB to 3 Pin 15 A plug point with 1x14 SWG GI ECC (wiring only). EI Conduit |
| 27 | (b) Distribution wiring in 2x4 sqmm single core PVC insulated stranded Copper wire in 19 mm EI conduit/GI conduit from separate way of BDB to 3 Pin 15 A plug point with 1x14 SWG GI earth continuity wire (wiring only). (EI Conduit) |
| 28 | Sub Total |
| 29 | GST 18% |
| 30 | LWC 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 18, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender