Tender for e-rate quotation of non dsr items for preparation of estimate for improvement to nashik - niphad-yeola - vaijapur-aurangabad road msh-2 km 179/00 to 235/00 tal-yeola. dist. nashik (under epc-59)

Sharing tender

e-rate quotation of non dsr items for preparation of estimate for improvement to nashik - niphad-yeola - vaijapur-aurangabad road msh-2 km 179/00 to 235/00 tal-yeola. dist. nashik (under epc-59) , supply plants (bouganvilla) height up to 3-4 feet having minimum 3 inch feet girth, well developed, healty condition, free from pest & diseases, well settled in appropriate size of polybag, uniform in size and root system are undamaged , supply plants height up to 8-10 feet having minimum 3 feet girth & having minimum 5 to 6 branches with maximum number of leaves, clear trunk, well developed canopy, healty condition, free from pest & diseases, well settled in appropriate size of polybag, uniform in size and root system are undamaged. name of plants as below. a) bahonia , b) kari scariya , c) rita , d) spithodia , e) tabeebiya , fountain works at vinchur rotary a) water nozzle , b) plumbing , c) submersible pumps 5/10 hp , d) electrical system , supplying and erecting dc led street light fitting of 12v 100w including first 12 hr./15 hr. full intensity light output with lumen 3750 colour temp 5500k - 6500k colour redering index 70 pwm charge controller efficiency 90 % led driver efficiency 90% duty cycle externnal optics 145x90 degree street light lens class lp 66 charge controlller methodology - three stage battery charge monitoring algorithm maximum charging current 10 amps short circuit protection battery over charge protections battery deep discharge protection solar panel dusk to dawn operation nttv- 4v dttv- 6v battery low load disconnect voltage 2 1.2v battery full load disconnect voltage 13v battery constant voltage set point 25.6v led lndication- green off battery not charging pv low green on battery charging green flashing battery full red off battery not discharge ged on battery discharge load disconnect overall dimension- 255mm x 90mm x 60mm overall weight- 1kg. and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete. , supplying installing testing and commissioning of solar panel comprising high efficiency mono -crystalline photovoltaic cell 160wp 12v with necessary clamps and module frame on existing structure complete. module volt(v)=12 no. of cells in series=36 cell size(mm)=156.75 cell size tolerancetl% module size (lxwxh) in pp=(1012x982x35) voc19=23.15 lsc(a;=6.36 pmax(w)=160 vpm(v)=18.44 lpmln;=3.47 efficiency(%)=16.05 electrical tolerance(t%)=2 temperature coefficient of open circuitvoltage(beta) l c=o.28o/o temperature coefficient of short circuit current(alpha)/c=0.005% temperature coefficient of power(gamma)/c=0.38% nominal operating cell temperature=4lc rzc operating temperature range from -40c to +85c junction box conneclor lp68 waterproof ppo and mc4 compatible. module weight (kg) =11.20(5 yrs warrantee) , supplying installing testing and commissioning of solar panel comprising high efficiency poly -crystalline photovoltaic cell 160wp 12v with necessary clamps and module frame on existing structure complete. module volt(v)=12 no. of cells in series=36 cell size(mm)=156.75 cell size tolerancetl% module size (lxwxh) in pp=(1012x982x35) voc19 23.15 lsc(a;=6.36 pmax(w)=160 vpm(v)=18.44 lpmln;=3.47 efficiency(%)=16.05 electrical tolerance(t%)=2 temperature coefficient of open circuit voltage(beta) l c=o.28o/o temperature coefficient of short circuit current(alpha)/c=0.005% temperature coefficient of power(gamma)/c=0.38% nominal operating cell temperature=4lc rzc operating temperature range from -40c to +85c junction box conneclor lp68 waterproof ppo and mc4 compatible. module weight (kg) =11.20 (5 yrs warrantee) , supply, installation, testing & commissioning of 6.0 mtr pole made of hot dip galvanized iron, 6.0 metre high decorative gi pole complete with single arm bracket, solar panel mounting frame, battery support frame, base plate and anchor bolts etc. mild steel mounting plate (300 mm square x 16 mm thick steel of grade e 250 to 15 2062 2011) with 4 elongated holes 38 x 19 to suit m 24 x 800 mm bolts of grade 8.8 at cc180, minimum embedment depth of 750 to 800mm with hot dip galvanized nuts & washers. this mounting steel plate along with foundation bolt of suitable size to be used for an ensuring firm grouting into the provided foundation. decorative base casting fitted to base plate (300 mm base dia) fitted on galvanized iron base(base casting height 700mm, decorative design with intermediate ring casting, if necessary access door provided with locking arrangement )with luminiare mounting height 6000 mm from pole base, decorative main structure gl pipe with height of 5750 mm height (outside dia of 114 mm, thickness of 5 mm and material of 15 2062 e250 grade). decorative galvanized iron embellishment with die-cast aluminium for mounting double arm bracket. pole section welded by certified welders using high end mig welding processes. the pole is coated with with antique copper/yellowish shade/as per user requirment colour shade finishing with zince rich primer & pure polyster powder coating or epoxy zink phosphate primer & finished using envirnmentally stable polyurethene based paint, uv resistant outdoor grade coating (coating thickness 80 microns minimum), with decorative signage of damroo & trishul/ahilyadevi holkar symbol/as per user requirment. all diamensions within +/-5% tolerance. total weight of pole 90 kg, with street light double arm bracket for erection of double fitting. the double arm pelican mini orna eva bracket is a split constructed type bracket stem, decorative ms fabricated double arm embellishment upto a height of 1000 mm suitable for mounting 2 x 50 w led street lights. the artistically curved double arm. made of ms pipe 38.1 mm dia x 2 mm thick spruced up with ms scroll with gravity die cast iron floral and leaf embellishment is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at one end and other end facilitates the fitment of luminaire. at 6000 mm height from base of pole with same colour as pole.with 2 nos dc led street light fitting of 12v 50w including first 5 hr. full intensity light output and following 7 hr. with half intensity light output with min. efficacy 170 lumen/watt (total system lumens output not less than =6800 lumen @ full intensity) colour temp 5700k.colour redering index70.output pf0.95. m. pt charge controller parameters are lights, solar pannel and battery observe server efficiency90% led drive efficiency 90% duty cycle first five hours 100%. res 50% light led external optics 145x90 degree street light lens class ip66 & 1k08 class, charge controller methodology-thre stage battery charge monitoring algorithm maximum charging current 20amps short circuit protection battery over charge protections, battery deep discharge protection, solar panel dusk to dawn operationnttv-4v dttv-6v battery low load disconnect voltage 11.2v battery full load disconnect voltage 13v battery constant , supplying installing testing and commissioning of solar panel comprising high efficiency mono -crystalline photovoltaic cell 100wp 25.6v with necessary clamps and module frame on existing structure complete. module volt(v)=12 no. of cells in series=36 cell size(mm)=156.75 cell size tolerancetl% module size (lxwxh) in pp=(1012x982x35) voc19=23.15 lsc(a;=6.36 pmax(w)=160 vpm(v)=18.44 lpmln;=3.47 efficiency(%)=16.05 electrical tolerance(t%)=2 temperature coefficient of open circuit voltage(beta) l c=o.28o/o temperature coefficient of short circuit current(alpha)/c=0.005% temperature coefficient of power(gamma)/c=0.38% nominal operating cell temperature=4lc rzc operating temperature range from -40c to +85c junction box conneclor lp68 waterproof ppo and mc4 compatible. module weight (kg) =11.20(5 yrs warrantee) , supply, installation, testing & commissioning of 9.0 mtr pole made of hot dip galvanized iron, 9.0 metre high decorative gi pole complete with double arm bracket, solar panel mounting frame, battery support frame, base plate and anchor bolts etc. mild steel mounting plate (300 mm square x 16 mm thick steel of grade e 250 to 15 2062 2011) with 4 elongated holes 38 x 19 to suit m 24 x 800 mm bolts of grade 8.8 at cc180, minimum embedment depth of 750 to 800mm with hot dip galvanized nuts & washers. this mounting steel plate along with foundation bolt of suitable size to be used for an ensuring firm grouting into the provided foundation. decorative base casting fitted to base plate (300 mm base dia) fitted on galvanized iron base(base casting height 700mm, decorative design with intermediate ring casting, if necessary access door provided with locking arrangement )with luminiare mounting height 6000 mm from pole base, decorative main structure gl pipe with height of 5750 mm height (outside dia of 114 mm, thickness of 5 mm and material of 15 2062 e250 grade). decorative galvanized iron embellishment with die-cast aluminium for mounting double arm bracket. pole section welded by certified welders using high end mig welding processes. the pole is coated with with antique copper/yellowish shade/as per user requirment colour shade finishing with zince rich primer & pure polyster powder coating or epoxy zink phosphate primer & finished using envirnmentally stable polyurethene based paint, uv resistant outdoor grade coating (coating thickness 80 microns minimum), with decorative signage of damroo & trishul/ahilyadevi holkar symbol/as per user requirment. all diamensions within +/-5% tolerance. total weight of pole 90 kg, with street light double arm bracket for erection of double fitting. the double arm pelican mini orna eva bracket is a split constructed type bracket stem, decorative ms fabricated double arm embellishment upto a height of 1000 mm suitable for mounting 2 x 50 w led street lights. the artistically curved double arm. made of ms pipe 38.1 mm dia x 2 mm thick spruced up with ms scroll with gravity die cast iron floral and leaf embellishment is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at one end and other end facilitates the fitment of luminaire. at 9000 mm height from base of pole with same colour as pole.with 2 nos dc led street light fitting of 12v 50w including first 5 hr. full intensity light output and following 7 hr. with half intensity light output with min. efficacy 170 lumen/watt (total system lumens output not less than =6800 lumen @ full intensity) colour temp 5700k.colour redering index70.output pf0.95. m. pt charge controller parameters are lights, solar pannel and battery observe server efficiency90% led drive efficiency 90% duty cycle first five hours 100%. res 50% light led external optics 145x90 degree street light lens class ip66 & 1k08 class, charge controller methodology-thre stage battery charge monitoring algorithm maximum charging current 20amps short circuit protection battery over charge protections, battery deep discharge protection, solar panel dusk to dawn operationnttv-4v dttv-6v battery low load disconnect voltage 11.2v battery full load disconnect voltage 13v battery constant