Tender For Construction Of Additional 5Th 6Th And 7Th Floors Phase-2 For Sahakar Bhavan Building At Sakhar Sankul Premises Shivaji Nagar Pune - 411005
Tender Value
26.93 Crore
Estimated cost
Bid Submission
08 Sep 2026
9 days left
EMD
13.47 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Additional 5Th 6Th And 7Th Floors Phase-2 For Sahakar Bhavan Building At Sakhar Sankul Premises Shivaji Nagar Pune - 411005
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 5th Floor |
| 2 | 6th Floor |
| 3 | 7th Floor |
| 4 | Terrace Floor |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Terrace Floor |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Ground Floor |
| 7 | 5th Floor |
| 8 | Terrace Floor |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Ground Floor |
| 10 | 5th Floor |
| 11 | 6th Floor |
| 12 | 7th Floor |
| 13 | Terrace Floor |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Ground Floor |
| 15 | 5th Floor |
| 16 | 6th Floor |
| 17 | 7th Floor |
| 18 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)5th Floor |
| 19 | 6th Floor |
| 20 | 7th Floor |
| 21 | Terrace Floor |
| 22 | Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)5th Floor |
| 23 | 6th Floor |
| 24 | 7th Floor |
| 25 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Ground Floor |
| 26 | 5th Floor |
| 27 | 6th Floor |
| 28 | 7th Floor |
| 29 | Terrace Floor |
| 30 | Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)5th Floor |
| 31 | 6th Floor |
| 32 | 7th Floor |
| 33 | Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)5th Floor |
| 34 | 6th Floor |
| 35 | 7th Floor |
| 36 | Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)5th Floor |
| 37 | 6th Floor |
| 38 | 7th Floor |
| 39 | Terrace Floor |
| 40 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)5th Floor |
| 41 | 6th Floor |
| 42 | 7th Floor |
| 43 | Terrace Floor |
| 44 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Ground Floor |
| 45 | Terrace Floor |
| 46 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Ground Floor |
| 47 | 5th Floor |
| 48 | Metric Tonne |
| 49 | 7th Floor |
| 50 | Terrace Floor |
| 51 | Providing and fixing in position to the exact profile and prestressing the high tensile strands to specified ultimate strength, standard end anchorages, cable ducts, grouting ducts after prestressing and bearing plates with wedges as per detailed drawings including necessary plant and machinery for prestressing etc. complete.5th Floor |
| 52 | 6th Floor |
| 53 | 7th Floor |
| 54 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteGround Floor |
| 55 | 5th Floor |
| 56 | 6th Floor |
| 57 | 7th Floor |
| 58 | Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)Ground Floor |
| 59 | 5th Floor |
| 60 | 6th Floor |
| 61 | 7th Floor |
| 62 | Terrace Floor |
| 63 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.Ground Floor |
| 64 | 5th Floor |
| 65 | 6th Floor |
| 66 | 7th Floor |
| 67 | Terrace Floor |
| 68 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.Ground Floor |
| 69 | 5th Floor |
| 70 | 6th Floor |
| 71 | 7th Floor |
| 72 | Terrace Floor |
| 73 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.5th Floor |
| 74 | 6th Floor |
| 75 | 7th Floor |
| 76 | Terrace Floor |
| 77 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.5th Floor |
| 78 | 6th Floor |
| 79 | 7th Floor |
| 80 | Terrace Floor |
| 81 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.Ground Floor |
| 82 | 5th Floor |
| 83 | 6th Floor |
| 84 | 7th Floor |
| 85 | Terrace Floor |
| 86 | Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.5th Floor |
| 87 | 6th Floor |
| 88 | 7th Floor |
| 89 | Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.Ground Floor |
| 90 | 5th Floor |
| 91 | 6th Floor |
| 92 | 7th Floor |
| 93 | Terrace Floor |
| 94 | Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.5th Floor |
| 95 | 6th Floor |
| 96 | 7th Floor |
| 97 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. Complete.Ground Floor |
| 98 | Terrace Floor |
| 99 | Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 with fine cement finish 1.5 mm thick without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Complete.Terrace Floor |
| 100 | Providing and applying a base coat comprising of 1Kilogram Polydee-MC and 1Kilogram fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 500/- etc. complete.Terrace Floor |
| 101 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.5th Floor |
| 102 | 6th Floor |
| 103 | 7th Floor |
| 104 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete5th Floor |
| 105 | 6th Floor |
| 106 | 7th Floor |
| 107 | Providing and laying Vitrified tlles (Matt and Antiskid finish) In floor in 800milimeter x 1200milimeter sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S: 15622, of approved brand and manufacturer, in all colours and shade, lald on 20 millmeter thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slury @3.3 kg/sgm including grouting the joints with white cement and matching pigments excetra The tiles must be cut with the zero chipping diametermond cutter only Laying of tiles will be done with the notch trowel, plier, wedge clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.as directed by engineer-in- Charge.5th Floor |
| 108 | 6th Floor |
| 109 | 7th Floor |
| 110 | Terrace Floor |
| 111 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.5th Floor |
| 112 | 6th Floor |
| 113 | 7th Floor |
| 114 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.5th Floor |
| 115 | 6th Floor |
| 116 | 7th Floor |
| 117 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.5th Floor |
| 118 | 6th Floor |
| 119 | 7th Floor |
| 120 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite5th Floor |
| 121 | 6th Floor |
| 122 | 7th Floor |
| 123 | Terrace Floor |
| 124 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.5th Floor |
| 125 | 6th Floor |
| 126 | 7th Floor |
| 127 | Terrace Floor |
| 128 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.5th Floor |
| 129 | 6th Floor |
| 130 | 7th Floor |
| 131 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.5th Floor |
| 132 | 6th Floor |
| 133 | 7th Floor |
| 134 | Terrace Floor |
| 135 | Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.5th Floor |
| 136 | 6th Floor |
| 137 | 7th Floor |
| 138 | Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.5th Floor |
| 139 | 6th Floor |
| 140 | 7th Floor |
| 141 | Terrace Floor |
| 142 | Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.5th Floor |
| 143 | 6th Floor |
| 144 | 7th Floor |
| 145 | Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)5th Floor |
| 146 | 6th Floor |
| 147 | 7th Floor |
| 148 | Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.5th Floor |
| 149 | 6th Floor |
| 150 | 7th Floor |
| 151 | Terrace Floor |
| 152 | Providing and applying 2 Coats of 100% Pure acrylic low VOC water based paint with to withstand for period of atleast 5 years of approved make. Paint should provide durable long lasting silk finish with high resistance to UV and resistance to spreading of flame. Paint should protect against concrete carbonation with R value of minimum 600 and ability to built cracks upto min 0.7mm. The paint has to be applied on High quality water based acrylic copolymer primer with good alkali resistance properties. With all leads and lifts at all levels etc. complete, as directed by Engineer in charge.5th Floor |
| 153 | 6th Floor |
| 154 | 7th Floor |
| 155 | Terrace Floor |
| 156 | Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint).Ground Floor |
| 157 | 5th Floor |
| 158 | 6th Floor |
| 159 | 7th Floor |
| 160 | Terrace Floor |
| 161 | Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete.5th Floor |
| 162 | 6th Floor |
| 163 | 7th Floor |
| 164 | Terrace Floor |
| 165 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.5th Floor |
| 166 | 6th Floor |
| 167 | 7th Floor |
| 168 | Terrace Floor |
| 169 | Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge.Terrace Floor |
| 170 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete5th Floor |
| 171 | 6th Floor |
| 172 | 7th Floor |
| 173 | Solid Core Flush door Single leafProviding and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face Laminates on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame). (Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutterGround Floor |
| 174 | 5th Floor |
| 175 | 6th Floor |
| 176 | 7th Floor |
| 177 | Providing & Flxing 44-MM thick both side LAMINATED DOOR (WITHOUT GLASS) made up of 18mm thick COMMERTIOL ( 1S1-303) plywood frame covered with 12mm thick COMMERTIOL ( 1SI-303) plywood both side of the frame to get required thickness as per architectural design & drawing with both side Cover with 1.00mm thick LAMINATE confirming to (1S1 2046) Premium quality with grove, edges finish with 50 X 10mm BTC lipping as per drawing is fitted by BTC 22 X 10mm moulding [including all materials brass screw, brass hinges (125 X 12mm,) mortice lock, door stopper, antitermite treatment to plywood, two coats melamine pollish to moulding and lipping, labour charges as directed by engineer Incharge etc Complete.5th Floor |
| 178 | 6th Floor |
| 179 | 7th Floor |
| 180 | Providing and fixing factory made door/Window frames of required colour made with wood Polymer composite (WPC) extuded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two nos. of 10 x 8 mm & 40 mm long PVC dovetail keys including hard wood piece support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to be paid separately) etc. complete as per the direction of Engineer in charge,with prior approval of concerned Superitending Engineer.b) 1.2 For Profile size of 100 x 50 mm with 32 x 12 mm rebateGround Floor |
| 181 | 5th Floor |
| 182 | 6th Floor |
| 183 | 7th Floor |
| 184 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete5th Floor |
| 185 | 6th Floor |
| 186 | 7th Floor |
| 187 | Duct Door - Providing x & Luxalon SL4 84R plain panel sun louvers OF approved color consisting of panel 84mm wide 16mm deep X 6mm thick with round edges panel length up to 6 Mt ccil coated on continues paint line double baked & roll from enameled corrosion resistance. Aliminium Alloy AA 3005 (AI.Mg. ) for higher strength & good rool forming characteristics Panel shall be clipped to baked enameled aliminium SL-4 panel stringer of 33 mm wide & 68mm deep X 0.95 mm thick is a standard length of 5 Mt made of double baked anameled Aliminium alloy AA5050 (Al.Mg.) black with cut-out to hold the pannel in a module of 86mm center to center at a distance of 1 Mt. The carrier shall be fixed to suitable structure by means of rigid fxing details includes Paint Finish : Aluminium panels shall be cromotised for maximum bond between metal & paint enameled twice under high temperature one side with full primer & luxacoat finish. The other side (Inner side) with a primer coat & skin coat on a continuous paint line etc.complete as directed by Engineer-in-charge.5th Floor |
| 188 | 6th Floor |
| 189 | 7th Floor |
| 190 | Terrace Floor |
| 191 | 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. with prior approval of concerned Superitending EngineerProviding of 120 min Fire rated lead lined doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology (\\"Non Combustible by Nature\\"). Lead lined to check radiation. Code No; 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2.a) Door Frame: Providing Frames for Lead Lined Fire resistant door shutters 1st class Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 140 X 70 mm with 45mm thick two layered 3mm Lead Line Sheets with 10mm overlap from either side & spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed in the groove of the Frame for fire and hot and cold smoke sealing, etc. complete as per direction of Engineer in Charge5th Floor |
| 192 | 6th Floor |
| 193 | 7th Floor |
| 194 | Terrace Floor |
| 195 | b) Shutter: Providing of 57mm thick asbestos free composite, 'TUFWUD' brand - 3 criteria - fire, heat and smoke check Lead Lined Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2x9mm Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x30 mm with 30mm thick infill of ceramic fibre (density 128 Kilograms/CMT) vermiculite mix, 3mm thick Lead Sheet on one side faced & 3mm Fire retardant High Density Fibreboard, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Intumescent paint of minimum 300 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping.5th Floor |
| 196 | 6th Floor |
| 197 | 7th Floor |
| 198 | Terrace Floor |
| 199 | c) Vision Panel:2 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside the shutter structure with 10 mm inside the shutter on all sides with U- glazing. An additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints.5th Floor |
| 200 | 6th Floor |
| 201 | 7th Floor |
| 202 | Terrace Floor |
| 203 | Panic Bar: (For 2 Hr fire Rated single Panic bar) Supplying, fitting & fixing Surface mounted Crash Bar/ panic Bar of touch pad style ,made of heavy duty cast iron/ steel body & latches with SS ,BHMA certified & conforming to ANSI A 156.3 for grade-1 ( 3 hours fire rated ) and suitable for surface mounting to wooden/hollow metal/ Al framed door,with maximum operating force 8Kilogram for unlocking easily & outwardly during emergency,complete in all respect as per direction & satisfaction of Engineer-in charge including all taxes & incidental charges. (Note: To be installed at \\"FIRE EXIT\\"only under location specific instruction of Eingineer-in -Charge.) 5th Floor |
| 204 | 6th Floor |
| 205 | 7th Floor |
| 206 | Terrace Floor |
| 207 | Door Closure: (For 2 Hr fire Rated EN-3 Door Closure) Supplying, fitting & fixing Surface mounted overhead Door Closer for 2 hour fire rated doors of different size (e.g size -EN-3 for leaf width upto 900mm) CE certified, marked & conforming to EN - 1154 of approved quality (Internationally reputed brand like Dorma, Geze, Hafele, Assabloy & Magnum etc.) fitted and fixed Complete as per direction & satisfaction of Engineer -in Charge including all taxes & incidental charges.5th Floor |
| 208 | 6th Floor |
| 209 | 7th Floor |
| 210 | Terrace Floor |
| 211 | 12\\"SS Handle: (For 2 Hr fire Rated 12\\"SS Handle) Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154 of approved quality (Internationally reputed brand like Dorma, Geze, Hafele, Assabloy & Magnum etc.)as per direction of Eingineer -in Charge fitted and fixed complete including all taxes & incidental charges.5th Floor |
| 212 | 6th Floor |
| 213 | 7th Floor |
| 214 | Terrace Floor |
| 215 | Aluminium System Color Anodized Partly Fixed/ partly openable system Window :- Providing and fixing aluminium system color anodized partly fixed/ partly openable window various sizes. Casement will be made from Geeta/ Malwin/Lexi/Brandson, 40mm series or equivalent system. Windows will be of specially extruded aluminium section Joints will be of 45 degrre joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 wood screws. Fixed glass casement will be made from specially extruded aluminium section, glass considered is 5mm clear toughned glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits from uniform hairline. All fixing screws will be SS 202. Window will be sealed with weather sealant from outer periphery. Etc complete as per architecture drawing and the direction of the engineer-in-charge.5th Floor |
| 216 | 6th Floor |
| 217 | 7th Floor |
| 218 | Terrace Floor |
| 219 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating , fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete5th Floor |
| 220 | 6th Floor |
| 221 | 7th Floor |
| 222 | Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete5th Floor |
| 223 | 6th Floor |
| 224 | 7th Floor |
| 225 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. metre5th Floor |
| 226 | 6th Floor |
| 227 | 7th Floor |
| 228 | Terrace Floor |
| 229 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.Ground Floor |
| 230 | 5th Floor |
| 231 | 6th Floor |
| 232 | 7th Floor |
| 233 | Terrace Floor |
| 234 | Providing and fixing of SS 304 - Polycarbonate Base Bird Spike with necessary fittings and scaffolding at any height, Including cleaning the existing Surface if necessary or as directed by Engineer In charge etc. complete.5th Floor |
| 235 | 6th Floor |
| 236 | 7th Floor |
| 237 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge.Ground Floor |
| 238 | 5th Floor |
| 239 | 6th Floor |
| 240 | 7th Floor |
| 241 | Terrace Floor |
| 242 | Supply and installation of ZMS (Nylon) cubicles of width and depth as per specifications/ site drawings. Cubicle height will be 2003 mm. ZMS Series Cubicles: Std Sizes (W x D x H): 900 mm x 1550 mm x 2003 mm, (Height is including 150 mm gap from bottom) Door Width- 600 mmITEM DESCRIPTION Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C. All doors will be of single colour and made of 12 mm thick HPL compact panel. All pilasters will be made of 12 mm thick HPL compact panel. All intermediate partitions or dividers will be made of 12 mm thick HPL compact laminate panels. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are Semi-spherical (Top) head frame structure for surface protection. Size to be 50x32x1.6T. Corner joinery section, Size to be 40x16.5x1.8T.U-Channel Wall joinery section, Size to be 22x16x1.6T.Door stopper section, Size to be 21x12.5x1.6T. Stainless steel grade 304 screws, Anti-rotation Nylon polyamide grade-6 expandable wall plugs, The Work shall complete as per drawing , under supervision of engineer in charge, etc complete.5th Floor |
| 243 | 6th Floor |
| 244 | 7th Floor |
| 245 | Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs.Terrace Floor |
| 246 | Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.5th Floor |
| 247 | 6th Floor |
| 248 | 7th Floor |
| 249 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.5th Floor |
| 250 | 6th Floor |
| 251 | 7th Floor |
| 252 | Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)5th Floor |
| 253 | 6th Floor |
| 254 | 7th Floor |
| 255 | Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as per5th Floor |
| 256 | 6th Floor |
| 257 | 7th Floor |
| 258 | Aluminum laser cut Jali :- Providing and fixing aluminium laser cut jali of 2mm thickness with pure polyester Matt finish exterior grade UV resistant powder coating / anodizing. The jali to be fixed to the sub framing using self drilling screws which shall not be visible in the elevation. The sub framing to be anchored to the main building using Anchor fasteners. Test report to be submitted for structural stability of the system for its self weight and wind load of 120kmpl. Required detailed shop drawing and sample is needs to get approved from the project Architect before execution on site. Work shall be carried our including all lead and lift etc. As directed by Engineer-in-charge.5th Floor |
| 259 | 6th Floor |
| 260 | 7th Floor |
| 261 | Terrace Floor |
| 262 | Nylon net Supply of Nylon net - Net: Garware make Mesh Size 2 Inch x 2 inch, 2.5mm Thick Tying Rope Size-30mm Color Green \\"UV Resistant Including Transportation & installation5th Floor |
| 263 | 6th Floor |
| 264 | 7th Floor |
| 265 | Terrace Floor |
| 266 | Providing and fixing in position anodised (as per IS 1868/1982) Aluminium fixed staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kilogram/One Running Metre, Aluminium angle of size 15 mm x 15 mm x 1 mm,aluminium channel of 9 mm sizes, S.S.mosquito net of 304 Grade,4 mm thick float glass per detailed drawing and as directed by Engineer in charge etc.complete.5th Floor |
| 267 | 6th Floor |
| 268 | 7th Floor |
| 269 | Providing and fixing aluminium anodised logo of required size name including all fittings and fixing as per selecting of project Architect. Logo image must be approved and verified by project Architect. etc complete as per direction of the Engineer-in-Charge7th Floor |
| 270 | Providing and fixing of SS 304 - Still Name including material, cutting, bending, welding, finishing, fixing, scaffolding, complete as per selecting of project Architect. name size must be approved and verified by project Architect. etc complete as directed by Engineer In charge etc. complete.7th Floor |
| 271 | Providing and fixing Ivory european type wall-hung, Size 360mm x 360mm x 575 mm with flush valve having flow rate up to 6.0 Litr/Full Flush, 3Litr/Half Flush of Jaquar/Cera/Hindware /Perryware or equivalent make including PVC soil pipe, vent pipe upto outside face of wall, 100mm dia PVC plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.5th Floor |
| 272 | 6th Floor |
| 273 | 7th Floor |
| 274 | Providing and fixing C.P. 2 Way BIB cock (6LMP) with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge5th Floor |
| 275 | 6th Floor |
| 276 | 7th Floor |
| 277 | C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No ALD 563 )5th Floor |
| 278 | 6th Floor |
| 279 | 7th Floor |
| 280 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete5th Floor |
| 281 | 6th Floor |
| 282 | 7th Floor |
| 283 | Providing and fixing sink cock (6LPM) with regular swinging spout (Wall / floor Mounted Model) with wall flange having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make incluidng other necessary fitting, etc. complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)5th Floor |
| 284 | 6th Floor |
| 285 | 7th Floor |
| 286 | Providing and fixing Autoclosing pillar cock (6LPM) of pressmatic tap of approved make or equivalent including all fixtures, fittings etc. complete5th Floor |
| 287 | 6th Floor |
| 288 | 7th Floor |
| 289 | Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling Bottle-Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m X 0.60 m )5th Floor |
| 290 | 6th Floor |
| 291 | 7th Floor |
| 292 | Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.5th Floor |
| 293 | 6th Floor |
| 294 | 7th Floor |
| 295 | Providing and fixing Ivory glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Flush of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)5th Floor |
| 296 | 6th Floor |
| 297 | 7th Floor |
| 298 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.5th Floor |
| 299 | 6th Floor |
| 300 | 7th Floor |
| 301 | Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One No ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.5th Floor |
| 302 | 6th Floor |
| 303 | 7th Floor |
| 304 | Terrace Floor |
| 305 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete 5th Floor |
| 306 | 6th Floor |
| 307 | 7th Floor |
| 308 | Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete5th Floor |
| 309 | 6th Floor |
| 310 | 7th Floor |
| 311 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete5th Floor |
| 312 | 6th Floor |
| 313 | 7th Floor |
| 314 | Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete5th Floor |
| 315 | 6th Floor |
| 316 | 7th Floor |
| 317 | Providing and fixing on walls/ceiling/floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 318 | 6th Floor |
| 319 | 7th Floor |
| 320 | Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 321 | 6th Floor |
| 322 | 7th Floor |
| 323 | Providing and fixing on walls/ceiling/floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 324 | 6th Floor |
| 325 | 7th Floor |
| 326 | Providing and fixing on walls/ceiling/floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 327 | 6th Floor |
| 328 | 7th Floor |
| 329 | Providing and fixing on walls/ceiling/floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 330 | 6th Floor |
| 331 | 7th Floor |
| 332 | Providing and fixing on walls/ceiling/floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 333 | 6th Floor |
| 334 | 7th Floor |
| 335 | Providing and laying in trenches 50 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 12.43 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anticorrosive oil paint , 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 336 | 6th Floor |
| 337 | 7th Floor |
| 338 | Providing and laying in trenches 80 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 12.43 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anticorrosive oil paint , 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 339 | 6th Floor |
| 340 | 7th Floor |
| 341 | Terrace Floor |
| 342 | Providing and laying in trenches 100 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 12.43 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anticorrosive oil paint , 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Terrace Floor |
| 343 | Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete5th Floor |
| 344 | 6th Floor |
| 345 | 7th Floor |
| 346 | Providing and fixing screw down 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete5th Floor |
| 347 | 6th Floor |
| 348 | 7th Floor |
| 349 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 5th Floor |
| 350 | 6th Floor |
| 351 | 7th Floor |
| 352 | Providing and fixing screw down 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete5th Floor |
| 353 | 6th Floor |
| 354 | 7th Floor |
| 355 | Terrace Floor |
| 356 | Providing and fixing screw down 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete5th Floor |
| 357 | 6th Floor |
| 358 | 7th Floor |
| 359 | Terrace Floor |
| 360 | Providing and fixing screw down 50 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete5th Floor |
| 361 | 6th Floor |
| 362 | 7th Floor |
| 363 | Terrace Floor |
| 364 | Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. completeTerrace Floor |
| 365 | Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti-Corossive Paint)Terrace Floor |
| 366 | Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification No FF-FFA/ARV5th Floor |
| 367 | 6th Floor |
| 368 | 7th Floor |
| 369 | Terrace Floor |
| 370 | Providing fixing, testing and commissioning in position 75 mm dia minerally reinforced polypropylene high density low noise pipe ring fit conforming to BS EN 1451, Fire resistancy DIN 4102, B2, Tensile strength: 13 N/mm2, waste water between pH 2 and pH 12, Density: 1.9 g/cm3 3 DIN 53479 with all the engineered support as per detail technical specification, including all fittings such as bends, junctions, inspection doors, offsets, cowl, access pieces/plugs etc. including cutting holes in walls, slab and making good the same wherever required as per direction of Engineer in Charge. (Suspended Soil, Waste & Rain water Pipe at Basement Ceiling Level)5th Floor |
| 371 | 6th Floor |
| 372 | 7th Floor |
| 373 | Providing fixing, testing and commissioning in position 110 mm dia minerally reinforced polypropylene high density low noise pipe ring fit conforming to BS EN 1451, Fire resistancy DIN 4102, B2, Tensile strength: 13 N/mm2, waste water between pH 2 and pH 12, Density: 1.9 g/cm3 3 DIN 53479 with all the engineered support as per detail technical specification, including all fittings such as bends, junctions, inspection doors, offsets, cowl, access pieces/plugs etc. including cutting holes in walls, slab and making good the same wherever required as per direction of Engineer in Charge. (Suspended Soil, Waste & Rain water Pipe at Basement Ceiling Level)5th Floor |
| 374 | 6th Floor |
| 375 | 7th Floor |
| 376 | Providing and fixing 10 cm PVC nahani trap with grating etc. Complete. R.A. Unit : 1 / Per No5th Floor |
| 377 | 6th Floor |
| 378 | 7th Floor |
| 379 | Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge5th Floor |
| 380 | 6th Floor |
| 381 | 7th Floor |
| 382 | Providing and fixing on walls/ceiling/floor 63 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.5th Floor |
| 383 | 6th Floor |
| 384 | 7th Floor |
| 385 | Providing & Fixing 65 mm dia butterfly valve (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.Terrace Floor |
| 386 | Providing & Fixing 75-80 mm dia butterfly valve (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.Terrace Floor |
| 387 | Supplying & fixing in position galvanised iron puddle flanges of 60 cm length with flange on one / both ends and welded to mild steel plate (5mm thick) in the centre etc. complete as directed by engineer-in-charge. Flange on Both Ends 1- 100 mm dia puddleTerrace Floor |
| 388 | Supplying & fixing in position galvanised iron puddle flanges of 60 cm length with flange on one / both ends and welded to mild steel plate (5mm thick) in the centre etc. complete as directed by engineer-in-charge. Flange on One End 3 - 80 mm dia puddleTerrace Floor |
| 389 | Supplying & fixing in position galvanised iron puddle flanges of 60 cm length with flange on one / both ends and welded to mild steel plate (5mm thick) in the centre etc. complete as directed by engineer-in-charge. Flange on One End 1 - 50 mm dia puddleTerrace Floor |
| 390 | Providing and fixing 24\\" dia. FRP Cover for Overhead Water tankTerrace Floor |
| 391 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 392 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (for All leads & lifts) By Mechanical Means |
| 393 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (for All leads & lifts.) By Mechanical Means |
| 394 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means |
| 395 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (for All leads & lifts.) By Mechanical Means |
| 396 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 3m To 4.5 m.) By Mechanical Means |
| 397 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (for All leads & lifts.) By Mechanical Means |
| 398 | Disposing the excess excavated material obtained from the items of excavation and disposing the same off the site and at dumping place approved by the governing authority including loading, unloading and all leads and lifts complete. |
| 399 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) |
| 400 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. |
| 401 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 402 | Providing and laying Cast in situ/Ready Mix cement concrete in M10 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 403 | Providing and laying in situ M-10 cement concrete of trap / granite / quartzite / gneiss metal with 40% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete. |
| 404 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 405 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 406 | Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 407 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 408 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 409 | Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. |
| 410 | Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade |
| 411 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 412 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 413 | Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc |
| 414 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 415 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) |
| 416 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 417 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 418 | Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) |
| 419 | Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) |
| 420 | Providing & fixing mild steel railing 50mm dia & 3.6mm thick Top rail, 40mm dia & 3.2mm thick vertical at 1.1m c/c, 25mm dia & 3.2mm thick horizontal member 2 No, including necessary mild steel fittings such as bends, elbows etc. (if required) all welded to give one piece of appearance without burrs or protuberances, fixed on top of pardi Wall/slab/beam with appropriate mild steel inserts all as per design, with one coat of anti corrosive paint and two coats of enamel paint as per drawing etc. complete. |
| 421 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 422 | Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. |
| 423 | Design, Supply, supervision of Erection & Commissioning of Sewage Treatment Plant - 40KLD - MBBR BASED Supplying, erecting and commissioning Sewage Treatment Plant including following detail with respective Capacity and following electro mechanical specification only.Designing, providing, hydraulic testing, commissioning and giving satisfactorily trials of Sewer Treatment Plant consisting of Inlet Chamber, Screen chamber, BAR SCREEN, SEWAGE WATER TRANSFER PUMP, AIR BLOWER WITH MOTOR & ACOUSTIC HOOD, DIFFUSER MEMBRANE & AIR GRID, AIR GRID WITH AIR BLOWER PIPING, MEDIA FOR BIOREACTOR (MBBR), STEEL MESH FOR AT/ PERFORATED PIPE, SLUDGE TRANSFER PUMP, CHLORINE DOSING SYSTEM, FILTER FEED PUMP, PRESSURE SAND FILTER, ACTIVATED CARBON FILTER, CENTRIFUGE WITH PUMPS & POLY DOSING SYSTEM, INTERCONNECTING PIPING & FITTINGS, INSTRUMENTS with required valves, gates, drains, pathways, Administration Block cum Laboratory, Laboratory Equipment's, spares parts etc. complete as turnkey job with only electrical and mechanical works inclusive of following items, units as per detailed specifications for electrical and mechanical components with excluding GST levied by GOI & GOM in all respect etc. complete. Treated sewage can be used for irrigation, horticulture & flushing purposes. |
| 424 | Design, Supply, supervision of Erection & Commissioning of Sewage Treatment Plant - 100KLD - MBBR BASED Supplying, erecting and commissioning Sewage Treatment Plant including following detail with respective Capacity and following electro mechanical specification only.Designing, providing, hydraulic testing, commissioning and giving satisfactorily trials of Sewer Treatment Plant consisting of Inlet Chamber, Screen chamber, BAR SCREEN, SEWAGE WATER TRANSFER PUMP, AIR BLOWER WITH MOTOR & ACOUSTIC HOOD, DIFFUSER MEMBRANE & AIR GRID, AIR GRID WITH AIR BLOWER PIPING, MEDIA FOR BIOREACTOR (MBBR), STEEL MESH FOR AT/ PERFORATED PIPE, SLUDGE TRANSFER PUMP, CHLORINE DOSING SYSTEM, FILTER FEED PUMP, PRESSURE SAND FILTER, ACTIVATED CARBON FILTER, CENTRIFUGE WITH PUMPS & POLY DOSING SYSTEM, INTERCONNECTING PIPING & FITTINGS, INSTRUMENTS with required valves, gates, drains, pathways, Administration Block cum Laboratory, Laboratory Equipment's, spares parts for 2 years of operation, etc. complete as turnkey job with only electrical and mechanical works inclusive of following items, units as per detailed specifications for electrical and mechanical components with excluding GST levied by GOI & GOM in all respect etc. complete. Treated sewage can be used for irrigation, horticulture & flushing purposes. |
| 425 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 426 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. |
| 427 | Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 428 | Organic Waste Converter (OWC) Specification: Supply, installation, testing, commissioning, and handing over of a fully automatic Organic Waste Converter (OWC) of 210kg/day processing capacity suitable for treating biodegradable organic waste such as food waste, vegetable waste, fruit waste, cooked and uncooked food waste, flower waste, and garden waste. The OWC shall be manufactured with SS-304 contact parts, equipped with an efficient mixing mechanism, heating system, control panel, odor control arrangement, and safety features including overload protection and emergency stop. The system shall achieve a minimum 80–90% volume reduction within 24 hours and produce stabilized compost/pre-compost suitable for further curing. The scope shall include a matching-capacity shredder with hardened steel blades, curing bins/crates, leachate collection system, microbial culture, all electrical and mechanical accessories, interconnecting cables, foundation bolts, installation, testing, commissioning, operator training, and submission of operation and maintenance manuals. The OWC shall operate on 415V, 3-phase, 50Hz power supply, comply with Solid Waste Management Rules 2016 and CPCB/MPCB guidelines, and be supplied with a minimum 12-month comprehensive warranty from the date of commissioning. |
| 429 | 3 SEATER SOFA - Provide and supplying Three seater sofa of overall size 1950 x 750 x 750 mm height made out 75x38mm ( unfinished size ! C.P.T.W. sections frame , 6mm ply generally confirming to t.S. necessary covering from back & arm rests. The seat shall be of 125mm and back shall be 100mm thick duly covered with tapestry fabric / conpositer leather ( not less than Rs.350/. and foam of 60 density including necessary hardware , naval , jute cloth , casement etc.complete. All exposed wooden surface shall be melamine polished and to plywood and wood work with ten years guarantee bond etc. including all leads etc.6th Floor |
| 430 | 2 SEATER SOFA - Providing and supplying Two seater sofa of overall size 1350 x 750 x 750 mm height made out of 75x38mm ( unfinished size) C.P.T.W. sections frame, 6mm ply generally confirming to I.S. 303 for necessary covering from back & arm rests . The seat shall be of 125mm and back shall be of 100mm thick duly covered with tapestry fabric/ compositer leather ( not less than Rs.350/- /Rmt) including necessary hardware , naval , jute cloth , casement , springs etc.complete. All exposed wooden surface shall be melamine polished and an litermite treatment to plywood and wood work with ten years guarantee bond etc. including all leads & lift etc. complete. and as directed by Engineer in charge. 6th Floor |
| 431 | HIGH BACK CHAIR - High Back Revolving Chairs Providing and fixing High Back Revolving Chair Chair in Moulded Ply with Head rest, PU foam in Back & Moulded PU Seat, \\"T\\" Adjustable Arms. Synchronized Multi Lock Mechanism, Aluminium Base, & Gas Lift, as per the sample approved by Architect, etc complete. All samples muct be approved by the Project Architect and work must be done as directed by Engineer -In-Charge. including all leads & lifts. Back Height - High Back Back Finish - Mesh with Adjustable Lumber Support Back Mesh Color - Black Seat Finish - Fabric (with CM Foam) Seat Fabric Color - Black Seat Height Adjustment - Pneumatic Mechanism Type Synchronized Tilt Back Tilt Lock - Upright Position Back Tilt Tension - Adjustable Armrests Type-1-D Adjustable Arm pads Type - Polyurethane Base Type-5-Star in Black Nylon6th Floor |
| 432 | MID BACK CHAIR - Mid Back Sledge Base Providing and fixing Medium Back Chair with SS sledge base Chair in Moulded Ply. PU foam in Back & Moulded PU Seat, \\"T\\" Adjustable Arms, with SS sledge base as per the sample approved by Architect, etc complete. All samples muct be approved by the Project Architect and work must be done as directed by Engineer -In-Charge (beluding all leads & lifts. SPECIFICATIONS: Back Height - Medium Back Back Finish - Mesh with Adjustable lumber support Back mesh colour and seat colour - Black Seat Height Adjustable with gas Lift. Mechanism Type - Synchronized Tilt Back Lock Upright position Back Tilt Tension - Adjustable Armrests Type-1D PU Arms Base Tvne - Black Nvlon 5-Star Base.6th Floor |
| 433 | HALF HEIGHT – LAMINATED PARTITION FOR WORKSTATION - Providing & fixing LOW HEIGHT LAMINATED PARTITION 76mm thick Made up of of 18mm thick COMMERTIOL ( ISl-303) plywood 2x50 mr'n width frame work at 0.60 X 0.60 meter center to center and both face covered with 12 mm thick COMMERTIOL ( ISl-303) Ply treated with antitermite treatment and both side finish with 1.00 mm thick LAMINATE confirming to (ISi 2046) and 8 mm thick clear glass as per architectural design and drawing including all materials, Hardware, labors, and as directed by Engineer In charge etc. complete. 5th Floor |
| 434 | 6th Floor |
| 435 | FULL HEIGHT – LAMINATED PARTITION WITHOUT GLASS - Providing & fixing FULL HEIGHT LAMINATED PARTITION (WITHOUT GLASS)76mm thick Made up of of 18mm thick COMMERTIOL ( ISl-303) plywood 2x50 mm width frame work at 0.60 X 0.60 meter center to center and both face covered with 12 mm thick COMMERTIOL ( ISl-303) Ply treated with ant termite treatment and both side finish with 1.00mm thick LAMINATE confirming to (ISi 2046) as per architectural design and drawing including all materials, Hardware, labors, and as directed by Engineer In charge etc. complete. 5th Floor |
| 436 | 6th Floor |
| 437 | 7th Floor |
| 438 | FULL HEIGHT – LAMINATED PARTITION WITH GLASS - Providing & fixing FULL HEIGHT LAMINATED PARTITION (WITH GLASS) 76mm thick Made up of of 18mm thick COMMERTIOL ( ISl-303) plywood 2x50 mm width frame work at 0.60 X 0.60 meter center to center and both face covered with 12 mm thick COMMERTIOL ( ISl-303) Ply treated with ant termite treatment and both side finish with 1.00mm thick LAMINATE confirming to (ISi 2046)and 8.00 mm Thick Clear Glass as per architectural design and drawing including all materials, Hardware, labors, and as directed by Engineer In charge etc. complete. 5th Floor |
| 439 | 6th Floor |
| 440 | 7th Floor |
| 441 | CABIN PANELLING - Providing & fixing LAMINATED WALL PANELLING made up of COMMERTIAL 1.S 303 Ply 18mm thick plywood frame work of 75mm patti at 600mm x600mm center to center covered with 18 mm thick comertial plywood finished with 1.00mm thick LAMINATE confirming to (ISi 2046) Premium quality as per approved design , Plywood edges to be finished with BTC lipping, melamine polishing to moulding antitermite ireatment and as directed by engineer In charge etc complete. 5th Floor |
| 442 | 6th Floor |
| 443 | LAMINATED DOOR WITH GLASS - Providing & Fixing 44 MM thick both side LAMINATED DOOR (WITH GLASS) made up of 18mm thick COMMERTIOL ( ISl-303) plywood frame covered with 12mm thick COMMERTIOL ( IS!-303) plywood both side of the frame to get required thickness as per architectural design & drawing & Covered with both side 1.00mm thick LAMINATE confirming to (ISi 2046) grove, edges finish with 50 X 10mm BTC lipping and 8mm flot glass strip as per drawing is fitted by BTC 22 X 10mm moulding including all matarials brass scruw, brass hinges (125 X 12mm,) mortilse lock, door stopper, antitarmite treatment to plywood, two coat melamine pollish to moulding and lipping, labour charges etc. complete. 5th Floor |
| 444 | 6th Floor |
| 445 | 7th Floor |
| 446 | OFFICER TABLE - Providing & fixing STAFF TABLE having size of 1.35x0.60x0.75 metre made up of COMMERTIAL PLYWOOD I.S 303 code with pedisal made up of 18mm & 12mm plywood as per approved drawing with 400 mm chanels for key board and 600 mm chanels for drawer sliders and using W hinges for shutters to be fixetl with magnet, S.S. door chain,SS Handels 100mm, drawer lock and finished with 1. 00mm thick LAMINATE confirming to (ISi 2046) Premium quality in approved design & groves, Plywood edes to be finished with BTC lipping internal french pollishing, outer edges melamine anitermite treatmentant and as directed by engineer lncharge etc complete. 5th Floor |
| 447 | 6th Floor |
| 448 | OFFICER TABLE – RUNNER - Providing and fixing OFFICE TABLE SIDE RUNNER WITH DRAWER made up of COMMERTIAL I.S 303 Ply and back with 12mm thick commertial ply and shutter with 18mm plywood as per architectural desing & drawing and finish with 1.00mm thick LAMINATE confirming to (ISi 2046) Premium quality and inside surfece finish with trench pollish, including BTC lipping, 75mm brass hinges, brass screws, SS 304 grade handel, locks, s.s. chain , 100mm brass tower bolt, magnet,drawer chanel 400mm melamine pollish to moulding / lipping antitermite treatment to plywood , labour charges and as directed by engineer lncharge etc5th Floor |
| 449 | 6th Floor |
| 450 | MEETING ROOM TABLE - Providing & fixing MEETING ROOM TABLE FINISHED WITH LAMINATE having size of 6.60 X 0.60 XO. 75 m(HT) as per detailed drawing with following specifications made up of SANIK CENTURY COMMERTIAL I.S 303 Ply or equivalent brand 18mm thick comertial plywood and finished with 1.00mm thick AEROLAM MAKE LAMINATE confirming to (ISi 2046) or equvalent make Premium quality in approved design & groves, Plywood edes to be finished with BTC lipping internal face is finished with1 .00mm thick AEROLAM MAKE LAMINATE confirming to (ISi 2046) & outer edges is finish with melamine polishing, antitermite treatment etc complete.6th Floor |
| 451 | TV UNIT Size - Providing & fixing LAMINATED WALL PANELLING made up of \COMMERTIAL 1.S 303 Ply 18mm thick plywood frame work of 75mm patti at 600mm x600mm center to center covered with 18 mm thick comertial plywood finished with 1.00mm thick LAMINATE confirming to (ISi 2046) Premium quality as per approved design , Plywood edges to be finished with BTC lipping, melamine polishing to moulding antitermitetreatment and as directed by engineer In charge etc complete.6th Floor |
| 452 | STORAGES – LOW HT. (in meeting room) - Providing and fixing LOW HEIGHT STORAGE LAMINATED having depth 0.45m made up of COMMERTIOL ( ISl-303) 18 mm thick Plywood for frame work shelves , shutters and back with 12mm thick plywood as per architectural design & drawing and finish with 1.00mm thick LAMINATE confirming to (ISi 2046) and inside surface finish with French polish, including BTC lipping, 75mm bras hinges, bras screws, SS 304 grade handle, drawer lock, 100mm brass tower bolt, magnet, melamine polish two moulding, veneer, lipping antitermite treatment to plywood , and as directed by engineer In charge etc complete6th Floor |
| 453 | GLASS FILM - Providing And Applying Shatterproof Film with approved design and comuterised cutting for glass of partition or glass door. The surfaces shall be cleaned thoroghly if required using chemical and detergents before applying the appoved film. As directed by cnginccr inchargc etc. complete6th Floor |
| 454 | SIDE TABLE - Providing & Fixing SIDE TABLE LAMINATED having size 0.60X0.60x0.45 meter made up of 18 mm Thick SANIK CENTURY MAKE COMMERTIOL ( ISl-303) Ply or equivalent make made as per approved drawing and finished with 1.00mm thick AEROLAM MAKE LAMINATE confirming to (ISi 2046) or equivalent make primum quality in approved design & grove ,plywood finish with BTC lipping lntemaly finished with lnternaly finished with 0.8 mm Laminate confirming (ISi 2046) , outer edges melamine polish antitermite treatment and as directer by engineer in charge etc completed6th Floor |
| 455 | CENTER TABLE - Providing & Fixing CENTER TABLEhaving size 0.90x.60x.45 meter made up of 18 thick COMMERTIAL PLYWOOD (ISl-303) made up of as approved design & Drawing and finish with 1.00 mm thick LAMINATE IS 2046 primum quality in approved design & grove ,plywood finish with BTC lipping lnternaly finished with lnternaly finished with 0.8 mm Laminate confirming (ISi 2046) , outer edges melamine polish antitermite treatment and as directer by engineer in charge etc completed6th Floor |
| 456 | ROLLER BLINDS - Providing and fixing Roller Blind MAC-SCREEN LI-S3-Sand for windows, including all necessary fixtures and fittings, as per the sample approved by Architect, etc complete as directed by Engineer In Charge, including all leads & lifts6th Floor |
| 457 | CONFERENCE AREA -C SHAPE TABLE - Providing and fixing table in \\"C\\" shape of size 2.7 m x 0.90 m, side table 0.95 m x 0.30 m, back side table 2.05 m x 0.30 m having height of 750 mm as shown in drawing made up of 12mm and 19mm thick plywood conforming to ISI-303, The top and exposed surface shall be finished with 4 mm thick of approved veneer, at top surface only wooden beading 12 mm x 40 mm finished with melamine polish, all the support Plywood with 19 mm thick plywood Conforming to ISI-303, Internal surfaces finished with 0.8 mm thick laminate, including provision for cable manager,, plywood foot rest finished with 1 milimeter thick laminate, Including shutters & drawers with telescopic sliders of required sizes, handles, lock, hinges, magnet etc. as shown in the drawing and design supplied by the Architect and antitermite treatment to all plywoods etc. complete. All samples must be approved by the Project Architect and work must be done as directed by Engineer -In-Charge.6th Floor |
| 458 | ELECTRICAL WORKSSUBWORK-1-EXTERNAL WORKSupplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 459 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 460 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 461 | Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI |
| 462 | Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA |
| 463 | Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP. |
| 464 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 465 | Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete. |
| 466 | Supply, installation, testing & commissioning of MAIN CHANGEOVER PANEL (Location- Substation Room) . The panel shall be fabricated type with IP 43 protection. The panel shall be compartmental type with Aluminium busbar and separate cable and busbar chambers. The cable chambers shall be free from any live open connections. The panel shall be comprising of following & IEC 61439 OEM DESIGN & BMS COMPATIBLE& BMS COMPATIBLEThis panel should include Bus bar mounting Surge Protection Device Type 1 Tested as per IEC. 61643-11:2011 & UL 1449 4th edition. : 3 NOS. Nominal voltage -230V 50/60Hz, MCOV of 350 V.Total Impulse current -50 kA (10/350µ sec) - 12.5 kA each. Total Max Discharge current 560 kA (8/20µ sec) - 140 kA each. TOV Withstand for 120 min : 460v. Voltage protection level <1.2 kV. Protection Modes for : L & N to PE. The connections (Three Lines & Neutral) should be directly connected to Protective Earth Terminal for better response time. Short- Circuit Current rating (Isccr) – 85 kA/50 Hz.Total Response time < 1 nano sec . Multi function electronic meter with kW and pf display for Incomer:. Indication lamps for all incoming feeders for phase identifications and for indication of Switch status. I/C ACB should have Following accessories; 1) Protection - LSIG , 2) Ready to Close signaling contact, 3) Auxillary contacts - 4 NO + 4 NC, 4) Position Signal Switch, 5) UV Release, 6) ICU = ICS = 50 KA, 7) Microprocessor based, 8) Trip Signal Switch, 9) ACB should be capable to remotely switch ON, OFF, Trip status for BMS compatible @ RS 485 system. 10) Electrical & Mechanical Inter-locking.O/G ACB should have Following accessories; 1) Protection - LSIG -Adjustable Overload & Adjustable Shortcircuit, 2) ON/OFF - Auxilary Switch, 3) Trip - Fault Signaling contacts 4) Microprocessor based 5) ICU = ICS =50 KA, 6) Spreaders, 7) Rotary operating handle, 8) Phase Barriers. For more details refer Main SLD.Incomer:-11600 A FP ACB 50 KA FROM: TRANSFORMER-1. 1600 A FP ACB 50 KA FROM: SYNCHORNIZATION PANEL. BUS- COUPLER. 1600 A FP ACB 50 KA FOR: BUS COUPLER-1 BETWEEN BUS BAR-1 & 2. M+E INTERLOCKING BETWEEN INCOMER ACB & BUS COUPLER ACB For more details check logic table Engine Exerciser - An engine generator exercising timer shall be provided, including a selector switch to select exercise with or without load transfer.Outgoing OF BUSBAR-1:EMERGENCY FIRE LOAD. 630 A TP MCCB 25 KA FOR: FIRE FIGHTING PANEL. 100 A TPN MCCB 16 KA FOR: VENTILATION & PRESUERIZATION PANEL. 40 A TP MCB 10 KA FOR: STREET LIGHTING CURCUIT-1. 100 A TP MCCB 16 KA FOR: 2-NOS-SPARE. 200 A TP MCCB 25 KA FOR: 1-NOS-SPARE. Outgoing OF BUSBAR-2:NORMAL LOAD. 800 A TP ACB 36 KA EDO FOR: 1-NOS MAIN ELECTRICAL PANEL-A(CORE-1). 800 A TP ACB 36 KA EDO FOR: 1-NOS MAIN ELECTRICAL PANEL-B(CORE-2). 400 A TPN MCCB 25 KA FOR: 1-NOS-FOR APFC PANEL. 40 A TP MCB 10 KA FOR: PUMP DB. 40 A TP MCB 10 KA FOR: STP. 40 A TP MCB 10 KA FOR: WATCHMAN CABIN. 40 A TP MCB 10 KA FOR: LANDSCAPE & FAÇADE LIGHTING DB 250 A TPN MCCB 25 KA FOR: 1-NOS-SPARE. 400 A TP MCCB 25 KA FOR: 1-NOS-SPARE 200 A TP MCCB 16 KA FOR: 1-NOS EV CHARGING PANEL. 40 A TP MCB 10 KA FOR: 4-NOS-SPARE. Bus Bar OF TR with 1600 Amps Aluminium (Electrical Grade). |
| 467 | Supply, installation, testing & commissioning of DG SYNCHRONISING PANEL (FORM 4B TYPE 6) including AMF for all DG sets [NON CSR]The panel shall be compartmental type with Aluminium busbar and separate cable and busbar chambers. The cable chambers shall be free from any live open connections.Indication lamps for all incoming feeders for phase identifications and for indication of Switch status.I/C ACB should have Following accessories; 1) Protection - LSIG , 2) Ready to Close signaling contact, 3) Auxillary contacts - 4 NO + 4 NC, 4) Position Signal Switch, 5) UV Release, 6) ICU = ICS = 65 KA, 7) Microprocessor based, 8) Trip Signal Switch, 9) ACB should be capable to remotely switch ON, OFF, Trip status for BMS compatible @ RS 485 system.MCCB should have Following accessories; 1) Protection - LSIG -Adjustable Overload & Adjustable Shortcircuit, 2) ON/OFF - Auxilary Switch, 3) Trip - Fault Signaling contacts 4) Microprocessor based, 5) ICU = ICS =36 KA, 6) Spreaders, 7) Rotary operating handle, 8) Phase Barriers.INCOMER-1Incomer-1= 415V , 630A, 4P, MCCB of 36KA - 1NoIncomer-2= 415V , 630A, 4P, MCCB of 36KA - 1Nosychronizing controller for each DG set IncomerOUTGOING FEEDERS FROM INCOMING SOURCE -1415V , 1600A, 4P, ACB of 50 KA - 1No-To Main Changeover panel incomer415V , 1600A, 4P, ACB of 50 KA - 1No-SPARE415V, 1600A, 3Ph, 4wire 50Hz, Aluminium busbars (91E electrical grade) having withstand ability symmetrical fault level of 65 KA for 1 Sec.(WITH 100% NEUTRAL). |
| 468 | Supply, installation, testing & commissioning of EV Charging Panel (Location-)The panel shall be comprising of followingThe panel shall be fabricated type with IP 43 protectionThe panel shall be compartmental type with Aluminium busbar and separate cable and busbar chambers. The cable chambers shall be free from any live open connections.The panel shall be comprising of following & IEC 61439 OEM DESIGN & BMS COMPATIBLE& BMS COMPATIBLEMulti function electronic meter with kW and pf display for IncomerIndication lamps for all incoming feeders for phase identifications and for indication of Switch status. I/C MCCB should have Following accessories; 1) Protection - LSIG , 2) Ready to Close signaling contact, 3) Auxillary contacts - 4 NO + 4 NC, 4) Position Signal Switch, 5) ICU = ICS = 50 KA, 6) Microprocessor based, 7) Trip Signal Switch, 8) Trip status for BMS compatible @ RS 485 system.O/G MCCB/ACB should have Following accessories; 1) Protection - LSIG -Adjustable Overload & Adjustable Shortcircuit, 2) ON/OFF - Auxilary Switch, 3) Trip - Fault Signaling contacts 4) Microprocessor based, 5) ICU = ICS =50KA, 6) Spreaders, 7) Rotary operating handle, 8) Phase Barriers.INCOMER200 A FP MCCB 25 KA -1 NOS.OUTGOING FEEDERS 63 A FP MCB 10 KA -19 NOS.415V, 200A, 3Ph, 4wire 50Hz, Aluminium busbars (91E electrical grade) having withstand ability symmetrical fault level of 25 KA for 1 Sec.(WITH 100% NEUTRAL). |
| 469 | SUBWORK-2-INTERNAL ELECTRIFICATION WORKSupplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 470 | Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 471 | Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1Rx1.5 Sq.mm Earth Wire Considered) |
| 472 | Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1R x 2.5 Sq.mm Earth Wire Considered) |
| 473 | Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 474 | Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 475 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
| 476 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 477 | Supplying and erecting modular type telephone socket two gang with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 478 | Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO |
| 479 | Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 480 | Supplying and erecting PVC Surface modular double mounting plate 1 module complete duly erected. |
| 481 | Supplying and erecting PVC Surface modular double mounting plate 2 module complete duly erected. |
| 482 | Supplying and erecting PVC Surface modular double mounting plate 3 module complete duly erected. |
| 483 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected. |
| 484 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 485 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 486 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 487 | Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW |
| 488 | Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW |
| 489 | Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW |
| 490 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW |
| 491 | Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW |
| 492 | Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW |
| 493 | Supplying & erecting 50 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW |
| 494 | Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW |
| 495 | Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW |
| 496 | Supplying, erecting & commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW |
| 497 | Supplying, erecting & commissioning MDF Box 800x800 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW |
| 498 | Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW |
| 499 | Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.(Add on -1 - 16 extension x 13 nos= 38159 * 13=495937+60679=556616 |
| 500 | Supplying, installing, testing & commissioning push button telephone instrument desk top unit as per specification complete |
| 501 | Supplying & installing expansion cabinet for extension of digital hybrid EPABX to expand system by 32 ports with programming and configuration of extensions and Direct lines with required accessories complete. |
| 502 | Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC |
| 503 | Supplying and installing armoured single mode optical fibre cable 12 fiber, core dia 50/125μm. (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete. |
| 504 | Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC |
| 505 | Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG_x005f_x0002_NWC/GBS |
| 506 | Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP |
| 507 | Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU |
| 508 | Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK |
| 509 | Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x600x635 mm) as per specification No. WG-NAS/RAK |
| 510 | Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 511 | Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 512 | Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation |
| 513 | Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF |
| 514 | Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of 30 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS |
| 515 | Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 30 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS |
| 516 | Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete |
| 517 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 518 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 519 | Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 520 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 521 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 522 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB |
| 523 | Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, With insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB(For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.) |
| 524 | Supply, installation, testing & commissioning of MAIN ELECTRICAL PANEL A & B(Location- Meter Room)The panel shall be fabricated type with IP 43 protectionThe panel shall be compartmental type with Aluminium busbar and separate cable and busbar chambers. The cable chambers shall be free from any live open connections.The panel shall be comprising of following & IEC 61439 OEM DESIGN & BMS COMPATIBLE& BMS COMPATIBLEThis panel should include Bus bar mounting Surge Protection Device Type 1 Tested as per IEC 61643-11:2011 & UL 1449 4th edition. : 3 NOSNominal voltage -230V 50/60Hz, MCOV of 350 V.Total Impulse current -50 kA (10/350µ sec) - 12.5 kA each.Total Max Discharge current 560 kA (8/20µ sec) - 140 kA each.TOV Withstand for 120 min : 460vVoltage protection level <1.2 kV. Protection Modes for : L & N to PE. The connections (Three Lines & Neutral) should be directly connected to Protective Earth Terminal for better response time. Short- Circuit Current rating (Isccr) – 85 kA/50 Hz.Total Response time < 1 nano sec . Multi function electronic meter with kW and pf display for Incomer:.Indication lamps for all incoming feeders for phase identifications and for indication of Switch status.I/C ACB should have Following accessories; 1) Protection - LSIG , 2) Ready to Close signaling contact, 3) Auxillary contacts - 4 NO + 4 NC, 4) Position Signal Switch, 5) UV Release, 6) ICU = ICS = 50 KA, 7) Microprocessor based, 8) Trip Signal Switch, 9) ACB should be capable to remotely switch ON, OFF, Trip status for BMS compatible @ RS 485 system. 10) Electrical & Mechanical Inter-locking.O/G ACB should have Following accessories; 1) Protection - LSIG -Adjustable Overload & Adjustable Shortcircuit, 2) ON/OFF - Auxilary Switch, 3) Trip - Fault Signaling contacts 4) Microprocessor based 5) ICU = ICS =50 KA, 6) Spreaders, 7) Rotary operating handle, 8) Phase Barriers.For more details refer Main SLD.INCOMER800 A FP ACB 35 KA BUSBAR800A 35 KA TPN AL. BUSBAROUTGOING40A, FP, C-CURVE- 11 Nos.63A, FP, C-CURVE- 20 Nos.25 A, SP, C-CURVE-6 Nos.200 A TP MCCB 25 KA : 1-NOS |
| 525 | Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO |
| 526 | Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO |
| 527 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 528 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 529 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU |
| 530 | Providing & erecting hot dipped galvanised cover suitable for perforated typeCable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 500 mmwidth & 20 mm height complete with necessary hardware. |
| 531 | Supplying and erecting LED square / circular Max. 12W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 532 | Supplying and fixing 3m UTP patch cord of Cat 6 type inposition as per specification No. WG-COC/PC |
| 533 | Supplying and plugging 3m fibre patch cord LC-SC MM(50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC |
| 534 | Supplying, fixing, and configuring 10G Base-SR (SFP+) simplex MM transceiver erected in provided rack complete. |
| 535 | Supplying, fixing, and configuring dual-band manageable wireless, 4x4 802.11 AX Wifi 6 high performance, 3600mbps, with 2 ethernet ports 1 supporting GE & another port supporting 2.GE unified, concurrent access point with POE in networking as per specification no. WG-NAS/LAP2 |
| 536 | Supplying, fixing and configuring hardware wireless controller supporting minimum 100 Indoor/Outdoor AP complete as per specification WG-NAS/APWC |
| 537 | Supplying and erecting modular popup Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table |
| 538 | Supplying and erecting aluminium raceway 100 X 100 X 38mm on floor/wall/ceiling using C type clamps for fixing the raceways properly. Further raceways shall be earthed with each other / junction box with suitable size cu pvc coat wire & lugs to form a continues earth connection . The edges of raceways shall be smoothed at the cut section by file to avoid any damage to the wires while laying in raceway to the satisfaction of the client/consultant. |
| 539 | Supplying and erecting aluminium raceway 50 X 50 X 38mm on floor/wall/ceiling using C type clamps for fixing the raceways properly. Further raceways shall be earthed with each other / junction box with suitable size cu pvc coat wire & lugs to form a continues earth connection . The edges of raceways shall be smoothed at the cut section by file to avoid any damage to the wires while laying in raceway to the satisfaction of the client/consultant. |
| 540 | SITC of High quality power junction box of 150 X 150 X 65 -90 mm made up of MS Sheet metal fabricated housing with cover, laid in floor or above false ceiling complete as specified |
| 541 | SUBWORK-3-FIRE ALARM WORKSupplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC |
| 542 | Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 543 | Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP |
| 544 | Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF_x0002_AFAS/SD . |
| 545 | Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warrantyIS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD. |
| 546 | Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \\"Break Glass\\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP. |
| 547 | Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM |
| 548 | (New) Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM |
| 549 | Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM |
| 550 | Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. |
| 551 | Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR |
| 552 | Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC |
| 553 | Supplying, erecting, testing and commissioning of 1.0 sq. mm speaker wire complete. |
| 554 | Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required. |
| 555 | Supplying, installation, testing & commissioning of 2-Way Fire Fighting Telephone Jack for communication. |
| 556 | Supplying, installation, testing & commissioning of Fire Fighting Telephone Headset. |
| 557 | SUBWORK-4-ELECTRICAL EV CHARGING WORKSupplying, erecting, testing and commissioning of 10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V AC at each socket with 3.5\\"TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 Coated M.S, Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification. |
| 558 | Supplying, erecting, testing and commissioning of 30 kW DC Electric Vehicle Charger (suitable for 4 wheeler) having minimum IK08 & IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming supply and 1 nos 30kW output charger interface CCS2 with 200-500VDC supply, Interlocking arrangement with minimum 4 meter charging cable length, 5\\" LCD Touch Screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, One hour battery backup for communication, emergency push stop button. User interface by mobile application/QR Code/RIFD Card/Password Login with payment options and having short circuit, over & under voltage, input phase reversal, surge protection, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification |
| 559 | Providing yearly subscription of payment gateway option for AC/DC EV Charger CMS (Charger management software) system for billing and payment gateway along with mobile application /android/IOS base app to facilitate charging, CMS should have ISO/IEC 27001:2003 certification. |
| 560 | SUBWORK-5-ABSTRACT OF CCTV WORK Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 561 | Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 562 | Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC |
| 563 | Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC |
| 564 | Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS |
| 565 | Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP |
| 566 | Supplying and fixing 24 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU |
| 567 | Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & Fibre switch/Fibre module as per specification no. WG-NAS/MMA |
| 568 | Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK |
| 569 | Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features4/5MP Vandal Dome Camera.1/2.7\\" or higher 4MP PS CMOS Image Sensor Max. 4MP (2688 x 1520)@25fps or above /Max. 5MP (2880x1620)@25fps or above Instastream, H.265, H.264, H.264H, H.264B, MJPEGSupport Quad StreamWDR(120dB), Day/Night(ICR), 3D NR, ROI, AWB, AGC, BLC, HLC, Digital watermarkingSupport Built-in MicIR Range of 30Mtr or above., Warm Light Range of 30Mtr or above.3.6mm fixed Lens (2.8mm, 6mm Optional)Micro SD Card upto 256GB Supported, PoE, IP 65/67, IK10ISO 9001: 2015, ISO 20000-1 : 2018, CE, FCC and RoHS, BIS, STQC ER Certificate. |
| 570 | Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specifications CCTV-HDD |
| 571 | SUBWORK-6-Fire FightingSupplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP |
| 572 | Supplying and erecting G.I. pipe ‘C’ class ERW 32 mm dia with necessary fittings complete as per specification no. FF-PP |
| 573 | Supplying and erecting G.I. pipe ‘C’ class ERW 40 mm dia with necessary fittings complete as per specification no. FF-PP |
| 574 | Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP |
| 575 | Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP |
| 576 | Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP |
| 577 | Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP |
| 578 | Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP |
| 579 | Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½\\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FFSPR. |
| 580 | Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. |
| 581 | SITC of Sprinkler Flexible drop 1000 mm long - UL Listed pipes made of Corrugated SS Tubing to with stand 16 Bar pressure with welded reducer on one end to directly accommodate sprinkler & female check-nut on the other end to connect to the branch pipe with supports complete. |
| 582 | SITC of Inspector test valve assembly with watch glass arrangement PN16, With Drain Ball Valve, 50mm dia |
| 583 | Supply & fixing of approved type Rosette Plates ( Recessed type, in two piece) for Sprinklers below false ceiling area. The Rosette shall be fabricated by M.S. plate, 2mm thick, powder coated of color approved by architects / client. |
| 584 | Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 of 4 kg capacity with necessary clamp for erection on Wall. |
| 585 | Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV |
| 586 | Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV |
| 587 | Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL |
| 588 | Supplying and erecting 19 mm dia high pressure poly propylene hose pipe complete as per specification no. FF-FFA/HOP |
| 589 | Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FFFFA/NZ |
| 590 | Supplying and erecting 19 mm dia gun metal chrome plated nozzle complete as per specification no. FF-FFA/NZ |
| 591 | Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) |
| 592 | SUBWORK-7- HVAC WORKSupplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 593 | Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 Kv |
| 594 | Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. |
| 595 | Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 1400 RPM complete erected in position as per specification no. FG-FN/EXF |
| 596 | Supplying, erecting, testing and commissioning of 16HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other equired/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 597 | Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 598 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 599 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 600 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz,AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 601 | Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, etc. |
| 602 | Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/AHU /FAN of suitable size with fire resist flexible double canvas sleeve complete. |
| 603 | Providing adhesive thermal insulation for supply / return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC2017 |
| 604 | Providing and applying of acoustic insulation for air ducts with 15mm thick, 48 kg/cu.m class 'O' nitrile rubber with necessary accessories. |
| 605 | Supplying & erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete. |
| 606 | Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. |
| 607 | Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill / diffuser of suitable size. |
| 608 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 609 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 610 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 611 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete. |
| 612 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 613 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 614 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 615 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 616 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 617 | Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for AC System as per specification No. ESD-HWP/CPVCNote : For Chlorinated Polyvinyl Chloride pipe, additional insulation of maximum 6 mm thickness to be considered on pipe. |
| 618 | Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloridepipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for AC System as per specification No. ESD-HWP/CPVCNote : For Chlorinated Polyvinyl Chloride pipe, additional insulation of maximum 6 mm thickness to be considered on pipe. |
| 619 | Supplying and erecting 40/50 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for AC System as per specification No. ESD-HWP/CPVCNote : For Chlorinated Polyvinyl Chloride pipe, additional insulation of maximum 6 mm thickness to be considered on pipe. |
| 620 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 621 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 622 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender