Tender For special Repair To Roof And Verandah Of Block No. T-32/1-5, 46/1-5 And 47/1-5 At Stn Family C In The Area Of Age B/R (Central) Under Ge (North) Pune.
Tender Value
1.12 Crore
Estimated cost
Bid Submission
21 Sep 2026
22 days left
EMD
1.88 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Roof And Verandah Of Block No. T-32/1-5, 46/1-5 And 47/1-5 At Stn Family C In The Area Of Age B/R (Central) Under Ge (North) Pune.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and directed. |
| 3 | Dismantling structural steel work including doors, gates, framed truss etc. complete all as specified and directed. |
| 4 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and rubbish off the premises complete all as specified and directed. |
| 5 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges as in Coping complete all as specified and directed. |
| 6 | S&F 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed. |
| 7 | S&F 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed. |
| 8 | M&L for 7 to 8mm thick PVC prelaminated Gypsum board false ceiling board on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 9 | S&F mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed. |
| 10 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-410-W(Gde-E-250) quality-A complete all as specified and as directed. |
| 11 | M&L for preparation of New / Old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. |
| 13 | M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed. (NOTE : Shade/ colour to be approved by Garrison Engineer in consultation with user.) |
| 14 | M&L for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.(NOTE : Shade/ colour to be approved by Garrison Engineer in consultation with user.) |
| 15 | M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as, CHEMISTIK PU 50 heavy Duty warerproofing coating or equivalent complete all as per manufacturer instruction complete all as specified and directed. |
| 16 | M&L for 75 mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregates as in plinth protection, concrete shall be laid in alternate bays not exc 3.0m in length, finished even and fair including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed. |
| 17 | Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down painted surface with wire brush and cleaning the surface with water etc complete all as specified and directed. |
| 18 | M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 20 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for preparation of newly plastered surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 22 | M&L for preparation of new plastered wall surface of any description, width or girth, by applying two coats of OBD over one coat of primer upto any height of Bldg, including necessary scaffolding complete all as specified and directed.(Note : Rate quoted is deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for any height of building.) |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc. 1.5 sqm and not exc. 4 sqm each complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and directed. |
| 25 | Taking down shutters of any description, area exc. 1 sqm and not exc. 2 sqm each complete all as specified and directed. |
| 26 | S&F 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed. |
| 27 | S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 28 | S&F stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 29 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, Water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: (1) Stainless steel butt hinges and necessary S Sscrews shall be paid separately.(2) All screws shall be self tapping and length of Screw not less than 50 mm. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc and as per site requirement. |
| 31 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 32 | S&F 300mm long aluminium alloy, anodised finished not less than 25 micron, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 16-18mm rod with SS-304 fixing screws and all accessories conforming to IS 733 and IS 1285, ISI marked, complete all as specified and as directed. |
| 33 | S&F 200mm long aluminium anodised finish not less than 25 micron, barrel tower bolts of extruded section, with recurring plate guided bracket, SS304 fixing screws and all accessories fixed in all respect complete all as specified and as directed. |
| 34 | S&F 100mm heavy duty steel butt hinges conforming to IS-1371, ball bearing type, manufactured form cold rolled steel conforming to IS 1074, min 3.0mm thickness with corrosion resistance finish complete with SS 304 countersink fixing screws and all accessories fixed complete in all respect as specified. |
| 35 | S&F 150mm size heavy duty aluminium alloy anodised handles manufactured from extruded aluminum alloy conforming to IS-733 and IS 1285 with min 25mm anodised finish complete with SS 304 fixing screws / through bolt, washer and all accessories fixed complete all as specified and as directed. |
| 36 | M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 37 | Dismantling of stone slabs, cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified and directed. |
| 38 | M&L for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical supports, fixed with neat cement slurry or arldite, including rubbing and polishing complete all as specified and as directed. |
| 39 | M&L for 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 40 | Labour only for full round moulding to 18 to 20mm thick granite slab such as in steps, cooking platform and similar situations complete all as specified and directed. |
| 41 | S&F Aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 42 | S&F Aluminium Powder coated (Thickness or powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and as directed. |
| 43 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/rubber beading in square n exc 0.5 sqm in each extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side, complete all as specified and as directed. |
| 44 | M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 45 | Excavation in post holes (or similar holes) each n.exc. 0.50 Cum, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around, in layers not exc. 25 cm thick in hard/ dense soil complete all as specified and as directed. |
| 46 | M&L for PCC 1:4:8 Type D2 (using 40 mm graded crushed stone aggregate) in foundation, mass concrete complete all as specified and as directed. |
| 47 | S&F rotational moulded polyethylene water storage tank 3 layer black/white colour water tank, non-toxic effect, algea foRMation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. |
| 48 | S&F 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 49 | S&F 15mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 50 | Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 51 | Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 52 | S&F for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 53 | S&F for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 54 | S&F in repairs heavy duty decorative drapery (curtain) rod bracket suitable for 25mm dia curtain rod manufactured from SS 304 with satin steel finish complete with SS 304 fixing screws, wall plugs and all accessories fixed complete in all respect as specified and directed by EIC. |
| 55 | S&F 25mm dia heavy duty drapery (curtain) rod manufactured from SS-304 conforming to IS 6911 with satin stainless steel finished complete with decorative finials, joining sleeves where required fixed complete in all respects as specified and directed. |
| 56 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall including taking down with all fittings complete all as specified and directed |
| 57 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall including taking down with all fittings including taking down with all fittings complete all as specified and directed. |
| 58 | S&F in repair PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed. |
| 59 | S&F in repair PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed. |
| 60 | S&F in repair PVC (SWR) Junction, single, (single T) equal or unequal, 110 mm bore,with access door complete all as specified and directed. |
| 61 | S&F in repair 75 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 62 | S&F in repair Vitreous Cliina wash basin, white, flat back, size 580x450irun (for Hospilal use) including CP brass waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy type 15 mm bore to be fixed with and including M S brackets and fixing with fastener complete all as specified. |
| 63 | S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement, complete including making good to floor complete all as specified and directed. |
| 64 | S&F PVC connection 15mm bore size with two PTMT check nuts and washers of length 450/600 mm complete all as specified and directed. |
| 65 | S&F in replacement angle stop cock 15 mm dia with wall flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified.(Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 66 | S&F in repairs, 15 mm dia chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 67 | S&F in repairs bib cock long body quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 68 | S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float, oval handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed.(Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 69 | S&F in repirs wall mixer brass \\"L\\" bend chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 70 | S&F in repair 15mm nominal bore, 325mm long cast copper alloy shower arm with wall flange, nickel chromium plate finish conforming to IS 8931, complete with 150mm x 150mm square ABS overhead shower having chrome plate finish, anti clog silicone nozzle, brass swivel ball joint, 15mm BSP threaded connection complete with washer, PTFE type, fixed complete all as specified and directed.(Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 71 | S&F in repair wall mounted cast copper alloy soap dish with concealed fixing complete with removable frasted glass soap tray of min 8mm thickness, holder manufactured from cast copper alloy, nickel chromium plated finish complete wiht SS-304 fixing screws, plug walls and all other accessories fixed complete all as specified and directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 72 | S&F in repairs 600mm long wall mounted cast copper alloy (brass) chromium plated towel rail comprising a heavy duty brass tube of min 19mm dia with cast brass end brackets, nickel chromium plated finish concealed fittings arrangements complete with SS 304 fixing screws, wall plugs and all accessories complete all as specified and directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 73 | S&F in repairs wall mounted type cast copper alloy (Brass) Chromium plated towel ring of 180-200mm dia,comprising of solid brass or brass tube ring with cast brass mounting bracket, nickel chromium plated concealed fixing screws, wall plugs and all other accessories fixed, complete all as specified and directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 74 | S&F in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 75 | S&F in repair 600mmx450mm bevelled edge looking mirror of selected quality glass of thickness not less than 5.50mm, itched desined corners, fixed to wall with 12mm dia spacers at each corners, complete all as specified and directed.(Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 76 | S&F in replacement wall mounted heavy duty stainless steel plate rack of size 609mm X 914 X 254 mm, fabricated from SS 304 conforming to IS 6911 comprising of side frames of min 1-2 mm thick sheet plate, plate holding rod of min. 6mm dia, support rod of min 8mm dia complete with drip tray of min 0.8mm thick SS 304 sheet, SS 304 fixing screws, heavy duty hilary wall plugs and all accessories fixed complete all as specified and directed. (Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 77 | S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and CP waste coupling, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 78 | M&L for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed. |
| 79 | M&L for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed. |
| 80 | M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed. |
| 81 | M&L for Second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sqcm but not exc. 6 Sqcm complete all as specified and as directed. |
| 82 | S&F for mild steel galvanised iron telescopic drawer slider 450mm long alongwith sliding wheel conforming to sample kept in GE office complete all as specified and as directed.(Note: Sample and Make shall be got approved by GE before procurement of material.) |
| 83 | M&L for second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 13 Sqcm but not exc. 25 Sqcm complete all as specified and as directed. |
| 84 | S&F in repair Extruded aluminium alloy handles, fabricated type, anodised of 75mm size fixed with Self Tapping screws complete all as specified and directed. |
| 85 | S&F Butt hinges, medium weight, cold rolled mild steel, of 100mm size fixed with Self Tapping screws all as specified and directed. |
| 86 | M&L for 75 mm thick PCC (1:4:8) Type D-2 (using 40 mm graded crusged stone aggregate) as in sub base/ flooring complete all as specified and as directed. |
| 87 | M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles with grey cement & pigment of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes including dismantling of existing complete all as specified and as directed. |
| 88 | M&L for Filleting in any position and to any shape in cement mortar 1:4 exc. 25 but not exc.50 sqcm including all mitres, stops, etc. complete all as specified and as directed. |
| 89 | E&M PORTIONM&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge) modular white cover plate & frame after chasing in brick masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following :- |
| 90 | One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed. |
| 91 | One ceiling fan point controlled by one, one way switch 6 Amps and electronic step type regulator complete.(Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoted.) |
| 92 | One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed. |
| 93 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed. |
| 94 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed. |
| 95 | All as per Ser. No. 89.00 above but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point, 16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed. |
| 96 | S & F Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed. |
| 97 | S & F Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed. |
| 98 | S & F Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed. |
| 99 | S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed. |
| 100 | S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed. |
| 101 | S & F, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed. |
| 102 | S & F modular fan step regulator, 120W - 2 module suitable for (48\\" & 56\\" fans) 230V, 50 Hz supply complete all as specified and as directed. |
| 103 | S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed. |
| 104 | S & F lamp holder, PVC/ Polycarbonate type with bakc plate suitable for batten fitting complete all as specified and as directed. (Note for 91.00 to 99.00 above :- Sample / Make of Modular switches / sockets etc shall be got approved by contractor from Garrison Engineer prior execution of work.) |
| 105 | S&F LED bulb 9 watt white in colour complete all as specified and directed. |
| 106 | S&F fan hook made of mild steel rod not less than 16mm dia, bent to shape, embedded in RCC slab with proper anchoring including necessary fixing arrangements for ceiling fan suspension complete all as specified and directed. |
| 107 | S&F 22 Watt Inverter LED Batten aluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.(Note: Sample and Make of LED batten shall be got approved by GE before procurement of material.) |
| 108 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store for keeping in safe custody for reuse at site and making complete all as specified and directed. |
| 109 | Taking down carefully main switch/cut out / MCB DB's of any make, type, capacity and description etc complete and making good the disturbed surfaces of walls, floors as per existing finishes complete all as specified and directed. |
| 110 | S & F sheet metal enclosure MCB DB SPN 12 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed. |
| 111 | S&F miniature circuit breaker (MCB) SP 5 To 32 AMP rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete all as specified and directed. |
| 112 | S&F miniature circuit breaker (MCB) SPN 32 AMP rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete all as specified and directed. |
| 113 | Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches, ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall by plastering smooth by applying two coats of same colour paint as existing, etc. complete all as specified and as directed. |
| 114 | Taking down unserviceable sub main wiring of any size and making good the disturbed surfaces complete all as specified and directed. |
| 115 | S & F submain wiring with 2 single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLSH) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone / brick masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed.(Note :- Two runs of 4 Sqmm main copper wire, one run of 4 Sqmm earth wire cable & PVC conduit shall be measured together as one length). |
| 116 | All as per Ser. Item No. 110.00 above but PVC insulated unsheathed multistranded flexible copper conductor cable of size 2.5 Sqmm complete all as specified and directed. |
| 117 | All as per Ser. Item No. 110.00 above but PVC insulated unsheathed multistranded flexible copper conductor cable of size 1.5 Sqmm complete all as specified and directed. |
| 118 | S & F submain wiring with 2 single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLSH) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone / brick masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed.(Note :- Two runs of 6 Sqmm main copper wire, one run of 6 Sqmm earth wire cable & PVC conduit shall be measured together as one length). |
| 119 | S&F modular charging socket suitable for USB Charger, 1.5 A to charge mobile, polycarbonate material, shrouded terminal, ISI marked 6 Amps One way complete all as specified and directed. |
| 120 | S & F for wall/ceiling mounted 10 watts or more indoor, box type light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed. (Note: Sample and Make of LED light fitting shall be got approved by GE before procurement of material.) |
| 121 | M & L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing of fan at site complete all as specified and as directed complete all as specified and as directed. |
| 122 | S&F plastic body exhaust fan, AC single phase, 240 Volts made of sturdy Engineering plastic complete withlouvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep louvers, BLDC motor including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan and depositing to MES store yard at AGE E/M office complete all as specified and as directed.(Note: Sample and Make of Exhaust fan shall be got approved by GE prior procurement of material.) |
| 123 | Taking down hot water geyser of any capacity after disconnecting, dismantling and removal to trade workshop for repair for servicing of Geyser by disconnecting the electric and water supply connections, dismantling the geysers of any size, type & capacity and opening the top and bottom cover, thermostat, heating element, safety valve, vent pipe, separating inner & outer tank, removing glass wool insulation complete and keeping aside for re-use after de-scaling of inner tank by liquid chemical and with pressure water jet and assembling back the geyser including re-installation on wall with studs, nuts & bolts keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 124 | S&F geyser Bolt 120mm Long with nut & washers, complete all as specified and directed. |
| 125 | Supply and installation of high-quality, durable material suitable for hot water applications 2 feet PVC connection for geyser, including all necessary fittings such as appropriate joints, couplings, or elbows as required for the installation, connections, and accessories including complete installation, testing, and making good complete all as specified and as directed. |
| 126 | S&F LED street light fitting 35 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as specified and directed.(Note: Sample and Make of LED Street light fitting shall be got approved by GE prior procurement of material.) |
| 127 | S & F down rod for ceiling fans made out of 15 mm dia MS pipe, medium grade duly threaded with clamp (factory fabricated) rubber reel, nuts, bolts etc complete all as specified and directed. |
| 128 | S & F for recess mounted 2' x 2' square LED panel 36 watts, fabricated CRCA sheet steel housing housing (70mm) duly powder coated with high efficiency LEDs & Glare free full opal Diffuser, IP20 and with System Efficacy of 120 Lumens/watt operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed.(Note: Sample and Make of LED Panel shall be got approved by GE before procurement of material.) |
| 129 | M & L for Earthing complete with galvanised steel earth plate, electrode, 600x600 x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connnected to GI Strip 32x6 mm dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 3 of SSR Part-I connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50 mm thick PCC 1:2:4 chamber cover with 6 mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber including demolish existing earth pit taking out old materials complete all as specified and directed.(Note : Rate is inclusive of GI strip upto 7.5mtr length and beyond 7.5 mtr shall be measured and paid separately) |
| 130 | Disconnecting / taking out carefully old unserviceable LT Feeder pillar box and making good the disturbed surfaces including Supply, Installation, Testing & Commissioning Factory made 1Mtr x1.2 Mtr LT feeder pillar box {CPRI approved} 440V AC, Compartmentalized, in door type in 1.6mm thick CRCA Sheet of Appropriate Size, IP65 Front Open Double Doors with sliding bolt locking arrangement, Dust & vermin proof, Cable Entry through Gland plates - Bottom only, Powder Coated, 3Phase HR Sleeved Colour Coded Aluminium Main Bus bar of 200 Amp, 03 No’s along with one Neutral Half Bus bar, Wiring with 10 Sqmm Copper wire (FR), Cable glands brass chromium plated of different sizes suitable for incoming MCCB' 125 Amp and fitted with following specified items alongwith Space for Energy meter, digital type 1 X 240 Volts, single Phase with optical port rating 10 to 60 Amp-16 Each :- |
| 131 | Ser. Item No. 125.00 Contd....(a) MCCB 4 POLE 415 Volt,100 Amp, Thermal Release Range 25 KA (ICS=ICU=100%) - 02 Nos(b) MCB DP 40 Amp ,Breaking capacity10 KA -16 Nos (c) Digital type VAF + PF meters , 03 Phase with CT's complete - 1 No.(d) Rotary switch - 01 No(e) Indicator lamp RYB - 1 No. (Set of Three) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender