Tender For Provision Of Certain Minor Works At Icgs Kavaratti Under Ge (Navy) Lakshadweep
Tender Value
17.54 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
3 days left
EMD
35080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lakshadweep District → Lakshadweep
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Minor Works At Icgs Kavaratti Under Ge (Navy) Lakshadweep
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC block masonry in portions ordered built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed . |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 depth and getting out in hard / dense soil for foundation etc. complete all as specified and as directed . |
| 3 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 depth and getting out in soft / loose soil for foundation etc. complete all as specified and as directed . |
| 4 | Returning filling in, with excavated soils including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and as directed . |
| 5 | Removing excavated material to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed . |
| 6 | M&L PCC 1:4:8 type D2 by by using 40mm graded crushed stone aggregate as in foundations, filling and mass concreting complete all as specified and as directed. |
| 7 | Pre -cast cement concrete block masonary with solid blocks exc 10 cm in width type C-1 1:3:6 (20mm graded stone aggregate) set in cement mortar 1:6 complete complete all as specified |
| 8 | Pre -cast cement concrete block masonary with solid blocks not exc 10 cm in width type C-1 1:3:6 (20mm graded stone aggregate) set in cement mortar 1:4 complete all as specified and as directed |
| 9 | Rendering 15 mm thick in cement mortar 1:4 in two coats 10mm thick and 5mm thick with mixing of water proofing compound as per manufacturer instructions on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid seperately as suplly only item |
| 10 | M & L Non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc set and jointed in net cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 11 | M &L Glazed ceramic coloured disigner / concept tiles in vertical surfaces 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 12 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed. |
| 13 | M&L hardcore with broken stone aggregate of gauge n.exc 63mm deposited spread and levelled in layer not exc 15cm thick, watered and rammed to true surface complete all as specified and as directed . |
| 14 | M&L PCC 75 mm thick 1:4:8 type D2 by using 40mm graded aggregate as in subbase of floor complete all as specified and as directed. |
| 15 | M&L PCC 25 mm thick 1:2:4 type B1 by using 20mm graded aggregate as in floors including necessry form work complete all as specified and as directed. |
| 16 | M&L PCC 100 mm thick 1:2:4 type B2 by using 20mm graded aggregate as in floors including necessry form work complete all as specified and as directed. |
| 17 | Supply only liquid water proofing compound |
| 18 | M&L heavy duty coloured chequred cement concrete tiles 30cmx30cmx25 to 30mm thick, lacquered finish set,jointed and pointed in neat cement slurry in floors with grey cement and pigments laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 19 | M&L cement concrete 1:2:4 type B0 byusing 12.5 mm graded stone aggregate in coping, kerbs, benching and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed |
| 20 | Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab for man holes / drainage / septic tank cover , set in cement mortar 1:4 including necessary from work complete all as specified and as directed.Note: Reinforocement shall be measured and paid seperately. |
| 21 | Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed . |
| 22 | M&L 75mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate finished even and smooth without using extra cement as in plinth protection and surface finished even and smooth without using exra cement including making necessary joint complete all as specified and as directed. |
| 23 | S & F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed. |
| 24 | S & F 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed. |
| 25 | S & F 40 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed. |
| 26 | S&F 15 mm bore fancy type bib tap standard of PTMT any colour with high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 105 gms) |
| 27 | S&F swivel shower with shower arm 195mm long with bend of 45 degree with flange of PTMT any colour fixing with 15mm complete all as specified and as directed. (Minimum weight 80 gms) |
| 28 | S&F 20 mm bore stop valve of PTMT any colour with high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 92 gms) |
| 29 | S&F 25 mm bore stop valve of PTMT any colour with high pressure screwed for iron pipe and fixed complete all as specified and as directed. |
| 30 | S&F PTMT grating doom100mm dia of PTMT complete all as specified and as directed. (Minimum weight 25 gms). |
| 31 | S&F corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 32 | S&F soap dish, fixed to walls with brass chromium plated screwscomplete all as specified and directed. |
| 33 | S&F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and as directed |
| 34 | S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and as directed |
| 35 | S & F PVC (SWR) bend, 110 mm dia bore,any radius with acess door complete all as specified and as directed |
| 36 | S & F PVC (SWR) bend, 75 mm dia bore,any radius with acess door complete all as specified and as directed |
| 37 | S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed. |
| 38 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling & fixing in opening complete all as specified and directed. |
| 39 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame at site complete all as specified and as directed . |
| 40 | S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, 100 mm long, complete all as specified and as directed. |
| 41 | S & F 150mm long aluminium anodised barrel tower bolts,of extruded section complete all as specified and as directed |
| 42 | S &F aluminum anodised handle cast type of 150mm long complete all as specified and as directed. |
| 43 | S & F aluminum aodised sliding door bolts of 250mm long with hasp and staple(bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 44 | S & F PVC ( SWR) 'P' trap suitable for 110/ 100mm bore of pipe complete all as specified and as directed. |
| 45 | Preparation of newly plastered surface of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed . |
| 46 | S&F framed work as in doors or gates of stainless steel grade 316L (16702), ASTM (86221) standard, welded types(12413), ISO(20239) certified using complete ERW or induction butt welded stanless steel sheeting or other covering. etc as required including either hooks and hinges or stainless steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging , guide channels fixing floors also stainless steel fastening and fixing complete all as specified and as directed. |
| 47 | M&L decorative solid PVC marble sheet 3.15mm thick , water proof, anti scratch inclusive of solvent / adhesive for fixing on PVC frame as in wall panelling as as per manufacturer instructions and complete all as directed. |
| 48 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed . |
| 49 | M&L for 18 mm thick WPC boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on both face, fixed in wall as in decorative frame work for hanging TV etc complete all as specified and as directed . |
| 50 | M&L for 18 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on both face, fixed in wall as in decorative frame work for hanging TV etc complete all as specified and as directed . |
| 51 | S&F magnetic catcher suitable for cupboard shutters etc complete all as specified and as directed . |
| 52 | S&F SS self closing Earl Bihari cupbard hinging device suitable for 600 wide shutter complete all as specified and as directed . |
| 53 | S&F 125mm long brass handles, caste type polished bright complete all as specified and as directed |
| 54 | M&L for french polishing two or more coat on wooden surfaces of any description,including cleaning and preparing the surface including a coat of wood filler on new works complete all as specified . |
| 55 | S & F LED strip light 20W,3000K ( WW) IP 20 in existing POP false ceiling including cutting in length as required at site amd making connections with driver and testing complete all as specified and as directed |
| 56 | S & F LED strip driver 12V, 2A imcluding connection with existing point wiring and testing complete all as specified and as directed |
| 57 | S & F powder coated aluminium rolling shtter with 1.00 mm thick aluminium extruded double wall slat of convex corrugation, with 2 mm thick aluminium side guide with and including all fittings and bottom component bar,mild steel bracket with suitable stiffners and mild steel heavy duty shaft with sufficient outer diameter to carry torsional load and springs made up with special spring wire. The gate shall be fitted with mechanical bevel gear box manually operated with cranks and lever arm as recommanded by the manufacturer of the aluminium rolling shutters with suitable aluminium hood cover.(All the aluminium item shall be powder coated of not less than 50micron) including making the rolling shutters functional in all aspects with suitable locking arrangements complete all as specified and as directed .Note:-(i) Measurement of rolling shutter will be the measurement of clear opening.(ii) The rate quoted includes making good of distrubed surfaces to match with existing surfaces complete all as directed. |
| 58 | S&F ball vallves suitable to fix 40 mm bore CPVC pipes complete all as specified and as directed. |
| 59 | Cutting existing CPVC pipes of 50mm outer dia and making branch connection for 40mm bore CPVC pipes by insertion of necessary fittings complete all as specified and as directed. |
| 60 | Cutting the existing road / hardstanding not less than 25cm in deep and 45cm in width for laying of CPVC pipe and making good the disturbed surfaces with PCC 1:2:4 type B2 using 40mm graded stone aggregate complete all as specified and as directed. |
| 61 | M&L rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 62 | S&F 25 mm oore ball vallves nigh pressure of PTMT with epoxy coated Aluminium rod & high denisity plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 210 gms) |
| 63 | Supply, installation, commissioning of Water cooler partialy stainless steel body electric driven,single phase having storage capacity 80 Ltrs and nominal cooling capacity of 40 Ltrs per hour complete all as specified and as directed . |
| 64 | Point wiring with PVC insulated unsheathed and multistranded copper conductor cable ISI marked, 1100 volt grade FRLS of size 2.5 Sqmm drawn in concealed suitable PVC rigid conduit with all fittings and accessories, fixing one MS pressed 1.6mm thock modular terminal box woth modular white plate of suitable size as required at site with PVC insulated unsheathed stranded copper conductor of size 2.5 Sqmm as earth wire connected common earth dolly as specified for one 16 Amp socket point controlled by one 16 Amp switch complete all as specified and as directed . |
| 65 | S&F modular switch, 1 way, 16A, 1 module complete all as specified and as directed. |
| 66 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 67 | S&F MCB SP, 5 to 32 amps, 240 volts,10 KA 'C' curve complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender