Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #57179900

Tender For Provn Of 02 X Rain Water Harvesting Projs One Each At Near Bhairav Baba Temple And Between Depot Gate And It Chowk At Pulgaon Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Wardha, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Sep 2026
17 days left
EMD
77700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of 02 X Rain Water Harvesting Projs One Each At Near Bhairav Baba Temple And Between Depot Gate And It Chowk At Pulgaon Mil Stn

BOQ

Name of Work:- PROVN OF 02 X RAIN WATER HARVESTING PROJS ONE EACH AT NEAR BHAIRAV BABA TEMPLE AND BETWEEN DEPOT GATE AND IT CHOWK AT PULGAON MIL STN
Sl. No. Item Description
1Surface excavation n exc 30cm deep and averaging 15 cm and getting out loose/soft soil / cutting bushes / shrubs, grass etc complete all as specified and directed
2Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed
3M & L Earth work in excavation all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, all as specified and directed.
4-Ditto- but exc 1.5 m wide and n exc 3.0 mtr deep and getting out any type of soil complete all as specified.
5-Ditto- as per item No 1 but exc 3.0 m wide and n exc 4.50 mtr deep and getting out any type of soil complete all as specified.
6M& L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil complete all as specified.
7M&L cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified.
8M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 complete.
9M&L for 300 mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) including PCC (1:3:6) type C-2 using 40mm graded stone aggregate Concrete bed to drain pipes including packing under complete with collars all as specified & as directed
10Rendering 15 mm thick on fair faces of brick /concrete surfaces in cement mortar (1:4) mixed with water proofing compoud 3% by wt of cement finishing the surfaces even and smooth without using extra cement.(WPC measured seperately)
11M& L for Providing, Plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified
12Providing precast cement concrete Type B1, 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified.
13Formwork to curved faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses with fair finish, etc.; vertical or to batter
14Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) with fair finish.
15M&L RCC Design mix M-25, using 12.50/20mm gradded stone aggregate as per design mix in basement of water tank/walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses, etc mixed with water proofing compound complete all as specified and directed.
16M&L RCC M-25, using 12.50/20mm gradded stone aggregate as per design mix in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified
17Material & Labour for applying Two coats of Epoxy water proofing paint including priming coat of water proof based primer applied @ 0.90 litre/10 sqm over new surfaces as per manufacturer's instruction complete all as specified and directed.
18M&L Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
19M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
20M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
21M & L for Sand cushing in floors or pavings,spread ,levelledand rammed including watering and consolidation complete all as specified
22M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including wateringcomplete all as specified.
23M& L for Hardcore broken stone boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified
24M& L for loose filling with pea gravel of size 1/8\\" to 3/8\\" to as in filter bed deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed complete all as specified
25Drilling of hole in any strata by mechanical percussion or rotary ring method below ground level including electric loging through any type of strata soil/rock disposal of soil with in 10 mtr keeping space for pea gravel packing and including lowering and extraction of perforated PVC pipe of dia 200mm complete all as specified.
26S&F perforated PVC pipe 200mm dia in any length and fixed in any position including inverted earthern pots with hole on top complete all as specified.
27M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil complete all as specified.
28S & F machine cut cudappah stone slab 20 to 25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and as directed.
29M&L for Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 20mm screed bed CM 1:6. incl demolition complete all as specified and as directed.
30M&L Reinforced concrete pipes, class NP-2 of 150mm bore laid and jointed complete with colars in cement mortar.
31PCC (1:3:6) type C-2 using 40mm graded stone aggregate Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested;haunching against sides of 150 mm nominal bore of pipes after they are laid and tested in trenches complete as specified pipe
32Preparing newly plastered surfaces of walls and applying two coats of cement base paint.
33M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M40 grade and grey cement and pigment for berms all as specified and directed.
34M&L for 100mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base floor
35M&L Brickwork with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6).
36M & L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick walls or concrete surfaces complete all as directed.
37M&L for cement concrete (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement.
38S&F for 75mm thick steel fibre reinforced (SFRC) drain cover slab with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton/Sqm in square, rectangular or circular shape complete all as specified & as directed.
39S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall 75mm bore for weep holes to drain
40Excavation in post holes (soft/loose soil) each n.exc.0.5 cum, getting out, RFR in and ramming earth or broken rubble mixed wth earth around in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc. 50m.
41M&L for rolled mild steel work angle iron,MS flats including embeding in concrete and screwing etc including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as spd & directed.
42Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and staraining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured).
43Supply only mild steel round bars 10mm dia as line bars for fixing chain link fencing
44M&L for mild steel screwe bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n.exc 10cm long and dia of neck not less than 11mm to 15 mm.
45Fixing only chain link fencing including line wire any mesh, size and type of standard rails straining bolts etc including provision of binding wire.
46Supply only chain link MS galvanished fencing of any size 4mm dia as directed.
47M&L Preparation of new steel surface of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
48M&L for applying two coats of synthetic enamel paint over a coat of red oxide on new steel surface n exc 10cm in width or girth when connected with other painting or when painted in different tint.
49M&L for Steel gate 3.50 m wide and 2.0 m high excluding wicket gate including RCC pillers (600X600mm) , double leaf including foundation guide rails, stoppers two coats of cement base paint to pillars and two coats of synthetic enamel paint over one coat of zinc chromate primer to steel surfaces and two coats cement base over coat of cement base primer in RCC pillars etc including excavation & earth work in soft/disintegrated rocks etc, mass concrete 1:4:8 type D2, complete all as specified and shown on drawing no TD/2004/13 sheet no 1/3 to 3/3. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57179900
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 14-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of 02 X Rain Water Harvesting Projs One Each At Near Bhairav Baba Temple And Between Depot Gate And It Chowk At Pulgaon Mil Stn
Basic Detail
Tender No 8375/E8
Bidding Type Tender
Location
City Wardha
State Maharashtra
Key Dates
Publish Date 24 Aug 2026
Submission Date 14 Sep 2026
Open Date 16 Sep 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 77700
Exemption Available
Document List
af3b2a05-8166-45f2-ae32-8cb6c96c556c.html
BOQ_880954.xls
Tenderdocus8375.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Sep 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

af3b2a05-8166-45f2-ae32-8cb6c96c556c.html

xls

BOQ_880954.xls

pdf

Tenderdocus8375.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders