Tender For Provn Of Y Shaped Angle With Concertina Coil On Boundary Of Building No P-155 Adjoining Vaidya Enclave Under Age B/R-I Of Ge (North) Meerut Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Sep 2026
13 days left
EMD
7740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Y Shaped Angle With Concertina Coil On Boundary Of Building No P-155 Adjoining Vaidya Enclave Under Age B/R-I Of Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft/loose soil complete all as specified and directed |
| 2 | M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in benching /coping/fixing of angle posts and the like including weathering, slightly rounded or chamfered angles as directed including form work and finishing all exposed surfaces including necessary form work complete all as specified and directed |
| 3 | S&F mild steel in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 4 | S&F concertina coil, hot dip galvanised steel wire coated with CLR anti corrosive paint, 600 mm dia spirally round shape in stretched position, 10 m openable length having 50 Nos rounds per 6 m of length, upto 3.0 m height of wall with existing angle iron Y shaped placed 2.4 m to 3.5 m distance, tied with steel staples and clips to retain horizontally on barbed wires tied to angle iron, complete all as specified & directed. |
| 5 | S&F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. |
| 6 | S&F mild steel screw bolts(machine made) exceeding 5cm and not exc 10cm long with diameter of shank 11 to 15mm with hexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete alll as specified and directed. |
| 7 | M & L for Steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape and tying with annealed MS wire 0.9mm dia complete all as specified and directed. |
| 8 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint incl one coat of red oxide complete all as specified and directed. |
| 9 | M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 10 | Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified & directed. |
| 11 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete al as specified |
| 12 | Taking down cement plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m complete all as specified and directed. |
| 13 | M&L for Rendering 15mm thick in CM 1:4 on brick / concrete surface finished even and smooth without using extra cement including mixing of water proofing compound as per Manufacturer's instructions complete all as specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 14 | Supply only integral water proofing compound complete all as specified & directed. |
| 15 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint using roller, over & including 2mm thickness putty, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender