Tender For Creation Of 630Kva Substation Along With Ht Line For Technological Intervention For Fish Seed And Trout Production In Ut Of Jk Dr Mangla Rai Committee Project . (Installation Of Large Carp Feed Mill At Rafda Gho Manhasa Jammu Scheme Code F
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Sep 2026
14 days left
EMD
42800
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Creation Of 630Kva Substation Along With Ht Line For Technological Intervention For Fish Seed And Trout Production In Ut Of Jk Dr Mangla Rai Committee Project . (Installation Of Large Carp Feed Mill At Rafda Gho Manhasa Jammu Scheme Code Fshss2324100013 Falling Under The Jurisdiction Of Electric Sub Division Canal On Turnkey Basis.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer Electric Division-III,JPDCL Jammu Name of Work : Creation of 630KVA substation along with HT line for technological intervention for Fish seed and Trout production in UT of JK Dr Mangla Rai Committee Project . (Installation of Large Carp Feed Mill at RAFDA Gho Manhasa Jammu Scheme Code FSHSS2324100013 falling under the jurisdiction of Electric Sub Division Canal on Turnkey basis. Contract No: e-NIT No. 43 of 2026-27 dt. 24.08.2026 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # |
| 2 | Item Description |
| 3 | Creation of 630KVA sub station alongwith HT line for technological intervention for fish seed and trout production in UT of JK DrMangla Rai Committee Project ( Installation of Large Carp Feed Mill at RAFDA Gho Manhasa Jammu FSHSS2324100013 (Providing/Supplying, Erection/Installation, Testing & commissioning comp Job) |
| 4 | 11/0.433 KV-0.250KV;50Hz, Copper wound Distribution Transformer of latest energy efficiency level-2 ( New), IS 1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. Suitable cable of ratings |
| 5 | Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type |
| 6 | 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type |
| 7 | 11 kV Horn Gap Fuse Set 3 Phase 200A |
| 8 | 400mm2 (2Ckt) Single Phase cable, 1.1 KV Grade, PVC Insulated Stranded Conductor FRLS Type. |
| 9 | 9Mtr Long Pole , ST-410 SP33 |
| 10 | 11kV Polymeric composite Disc Insulator 12kV with Fitting ,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 11 | GI Channel/angle/Flat of sizes including clamps for LA set/G.O set/Horn gap |
| 12 | Galvanized Nuts and Bolts |
| 13 | Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 14 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 15 | Galvanised Stay Set with 50 x 8 mm Stay Clamp, Guy Insulator (2 Nos), Anchoring Plate (200 x 200 x 6 mm), Nut & Bolts, 2 No Turn Buckle, 1.8m long, 16 mm diameter solid Stay Rod & 7/3.15 mm dia stranded wire complete |
| 16 | Wedge Connectors/PG Clamps |
| 17 | Danger Plates with Clamps |
| 18 | GI Barbed wire for Anti Climbing |
| 19 | Cement bottoming 1:2:4 mix as per REC standards 0.4 cum/pole |
| 20 | Painting of Poles Red Oxide |
| 21 | Painting of Poles Aluminium Paint |
| 22 | RCC Platform/ Bed for placing the transformer for 630 KVA Transformer as per approved design including GI mesh fencing of 6 feet height complete job (Design to be finalized during detailed Engineering ) |
| 23 | Sundry items like Aluminuim Lugs, Jumpers, Binding tape |
| 24 | G.I Channel |
| 25 | Erection of CT/ PT Unit for 630 KVA sub station for technological intervention for fish seed and trout production in UT of JK DrMangla Rai Committee Project ( Installation of Large Carp Feed Mill at RAFDA Gho Manhasa Jammu FSHSS2324100013 (Supplying, Installation, Testing & commissioning comp Job) |
| 26 | 11kV Pilfer resistant metering cubicle for 3phase 4 wire metering system made of MS Sheet steel thickness not less than 2mm duly power coat painted suitable for indoor as well as outdoor as per the site requirement. The cubicle shall be painted through 7- tank process. The External dimensions should be adequate. Panel having two compartments upper Meter compartment and lower CT/PT compartment. Provided with synthetic or semi synthetic gasket firmly glued to the surface, Dust, weather and Vermin proof and shall comply degree of protection IP 65 both the chambers having one sided hinged door arrangements. The metering panel shall be provided with two No MS channels of size 100 x 50 mm on the front and rear sides duly welded and 4 No of lifting hooks. It should be possible to take meter reading manually, through CMRI and computer without opening the LV chamber door. |
| 27 | Single Phase, Single core, single ratio, Epoxy resin Cast Current Transformers suitable for 11kV, copper wound primary type with rated burden 5VA and accuracy class 0.5 or better and conforming to IS2705 (part-I & II) amended upto date. ISF shall be upto 5 The CT ratio shall be as under: 50/5 for 630kVA DT |
| 28 | 11kV/ 110 V, Three phase epoxy resin cast PT with rated burden 15VA per phase andaccuracy class 0.5 or better and conforming to IS:3156 (part-I&II) amended upto date with proper colour coded identification. PTs shall be of uniform insulating and withstand separate source 23kV pf for one minute. |
| 29 | Bus Bar details:CTs bus bar:- 40x6 mm copper strip or adequate sizePTs bus bar: Copper wire 8 SWG or 30x0.6mm copper flat strip to connect PT terminal or adequate sizeduly insulated by the monoplast tape |
| 30 | PVC Copper wire flexible multi-strand of required size for secondary connections for CTwiring the minimum wire size shall be 4 mm2 (RYB) and for PT wiring minimum wire size shall be 2.5 mm2 (RYB). |
| 31 | Copper Lugs preferably ring type duly crimped for termination of wires and tapes |
| 32 | Grounding bus of minimum 40mm copper, 25cm long fixed to the unit in HV chamber.The CTs, PT meter and 11kV Cable sheath shall be grounded to the bus throughgrounding wire (green) of min size 10mm2 |
| 33 | 3Ph3 Wire HT CT/PT operated Fully static Smart Tri-Vector Energy meters DLMSCompliant Category 'C' with RS232 port for modem compatibility. 11kV/110V, Ph-Ph (3P,3W) meters for measurement of different electrical parameters including Active Energy (kWh/ MWh), Reactive Energy (kVArh/MVArh), Apparent Energy (kVAh/ MVAh) etc. (make L&T, Secure, ABB) |
| 34 | Independent flexible PVC pipes for CT wiring and PT wiring of appropriate size from HTcompartment to meter compartment |
| 35 | Pedestal made out of MS Channel of size 75 x 40 mm or angle iron of size 65 x 65 x 5mm, duly painted as per site requirement for mounting of metering panel including concrete foundation wherever required including cost of nuts and bolts |
| 36 | 3 Core 11 kV Aluminium cable XLPE armoured 35 mm2 including cost of clamp for its fixing where ever required. |
| 37 | Cable termination kits suitable for 3 x 35 mm2 XLPE Cable (indoor/outdoor) |
| 38 | Earthing 40 mm GI Pipe or 20 mm GI rod, 2.5 mtr for metering unit. Earthing ofmetering cubicle through two No 25 x 5 mm flat iron. |
| 39 | Laying of 0.05Km 11 KV Line on PCC Pole 9.0 Mtr long using ACSR Weasel for newly created distribution sub station for technological intervention for fish seed and trout production in UT of JK DrMangla Rai Committee Project ( Installation of Large Carp Feed Mill at RAFDA Gho Manhasa Jammu FSHSS2324100013 (Providing/Supplying, Erection/Installation, Testing & commissioning comp Job) |
| 40 | PCC Poles 9.0 Mtr long (WL:300Kg ) |
| 41 | GI Channel X-arm including clamp and braces |
| 42 | ACSR weasel Conductor(30 mm²) |
| 43 | PG Clamps for ACSR Weasel Conductor |
| 44 | 11 KV Polymer composite Pin Insulators 12KV,5KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm |
| 45 | Galvanized nuts & Bolts |
| 46 | Danger Plates with Clamps |
| 47 | Anti Climbing Device with Clamps |
| 48 | Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip |
| 49 | Stone Pad |
| 50 | Aluminium Jointing sleeves Total in Figures 0.0 0.0 Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 No Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information Compatibility Report for BOQe-NIT68.xls Run on 05-03-2024 17:31 If the workbook is saved in an earlier file format or opened in an earlier version of Microsoft Excel, the listed features will not be available. Significant loss of functionality # of occurrences Version Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear truncated. 3.0 Excel 97-2003 Some cells in this workbook contain data validation rules, which refer to values on other worksheets. These rules won't be saved. 4.0 Excel 97-2003 Minor loss of fidelity Some cells or styles in this workbook contain formatting that is not supported by the selected file format. These formats will be converted to the closest format available. 4.0 Excel 97-2003 |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender