Tender For Construction Of Passenger Shed At Halsidar , Halsidar , Block Verinag
Tender Value
3 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
9000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Passenger Shed At Halsidar , Halsidar , Block Verinag
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of manual labour for Clearence of site including disposal of same, all complete job |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in foundation trenches ordrains (not exceeding 1.5M in width as well as 10 Sqm on plan) including dressing of sides rammingof bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavatedsoil within a lead of 1 M from edge of cutting. |
| 3 | Providing and laying of stone soling including ramming with all carriages upto worksite complete job.(Plums) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8(1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | CEMENT CONCRETE (CAST-IN-SITU)Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | CEMENT CONCRETE (CAST-IN-SITU)Providing and laying in position cement concrete of specified grade RCC including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate). 40 mm thick 12.50mm nominal size stone aggregate (crushed) including glass strips at a squared interval of 5'x5' |
| 8 | FORM WORKCentering and shuttering including strutting, propping etc. and removal of form for: |
| 9 | Foundations, footings, bases of columns etc. for mass concrete |
| 10 | Reinforcement for RCC Work incld Cutting , bending Placing in Position complete job |
| 11 | Filling by Available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 12 | Supplying and filling in plinth with fine sand /Nallah Muck (Boulder Filling) under floors including watering rammiing ,consolidating and dressing , carriage complete job |
| 13 | 12 mm thick plaster in Cement Mortar 1:6 mix. |
| 14 | roviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 15 | Structural steel work welded in built up sections, trusses and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / tubes / channels etc. and including two or more coats enamal Paint. |
| 16 | Providing High Rib profile sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including 0.30m wide Ridges and Valley complete Job. 0.50mm thick |
| 17 | carriage of materials by MT |
| 18 | sand and aggregate avg lead of 30 kms by mt (sta) |
| 19 | CIB including photographs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender