Housing Urban and Rular Development Local Bodies Closing in 4 days TDR #57176102

Tender For Construction Of Community Sanitary Complex At Ward No 4 Lower Shara Mazara Bowli Panchayat Sandhar, Block Bhoond Under Sbm G Fy 2026-27 Tender Amount 3.00 Lac

Issued by Local Bodies · Kathua, Jammu and Kashmir
Tender Value
3 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
4 days left
EMD
6000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Community Sanitary Complex At Ward No 4 Lower Shara Mazara Bowli Panchayat Sandhar, Block Bhoond Under Sbm G Fy 2026-27 Tender Amount 3.00 Lac

BOQ

Name of Work:- CONSTRUCTION OF CSC At ward no 4 Lower Shara Mazara Bowli PANCHAYAT Sandhar, BLOCK Bhoond Under SBM G FY 2026-27 Tender Amount 3.00 Lac
Sl. No. Item Description
1Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: EXECUTIVE ENGINEER REW DIVISION KATHUA Name of Work:- CONSTRUCTION OF CSC At ward no 4 Lower Shara Mazara Bowli PANCHAYAT Sandhar, BLOCK Bhoond Under SBM G FY 2026-27 Tender Amount 3.00 Lac Contract NO:- SBM G 2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
4Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
5Filling of Stones
6Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
7Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more (To be paid as per actual).
8Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
9Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
10Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
11Suspended floors, roofs, landings, balconies and access platforms
12Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1315 mm Cement plaster on the rough side of 1: 4 mix
1412mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)
15Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown
16Providing and fixing 1mm thick M.S . Sheet door with frame of 40*40*6 mm angle iron and 3mm M.S. gusset plates at the junctions and corners , all necessary fittings complete, including applying a priming coat pf approved steel primer
17Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade: ON NEW WORK
18Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes 75mm diameter pipes
19Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.
20Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.
21Providing and fixing PTMT stop cock of approved quality and color.15 mm nominal bore, 86 mm long, weighing not less than 88 gms.
22Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms.
23Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25 mm nominal bore
24Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour. 15 mm nominal bore with 45 cm length.
25Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outleet and overflow pipes but without fittings and the base support for tank
26Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110 mm diametre
27Providing and fixing white vitreous china water closet squatting pan (Indian type). Orissa pattern W.C. pan of size 580x440 mm
28Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete. 10 liter capacity -White
29Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 550x400 mm.
30Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste ittings complete. Flexible pipe 32 mm dia.
31Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms
32Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
33Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
34Applying priming coat:With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood)
35Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
3625 mm dia G. I PIPES of medium size
37Sand for 25 Km by MT +50m h/Load
38Agg. Below 40mm 25 Km by MT +50m by H/ Load
39Agg. Above 40mm 25 km by MT
40Brick for 142 Km by MT
41CIB (citizen information Board ) size 4'00\\"x5'00\\"x0'9\\" (above plinth level) with tepered top having 20 degree slope in Brick Masonary(1:4) including plaster , paint, lettering and logos as per instruction of Engineer -in-charge including carriage of material. ( complete job) Total in Figures Excess(+) 1.0 Full Conversion INR 300043.71 300043.71 INR Three Lakh &Forty Three and Paise Seventy One Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57176102
AUTHORITY Local Bodies
TENDER VALUE 3 Lakhs
LAST DATE 04-09-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Construction Of Community Sanitary Complex At Ward No 4 Lower Shara Mazara Bowli Panchayat Sandhar, Block Bhoond Under Sbm G Fy 2026-27 Tender Amount 3.00 Lac
Basic Detail
Tender No e-NIT No.194/REW/K of 2026-27 Dated 24/08/2026
Bidding Type Tender
Location
City Kathua
State Jammu and Kashmir
Key Dates
Publish Date 24 Aug 2026
Submission Date 04 Sep 2026
Open Date 05 Sep 2026
Finance
Tender Value 3 Lakhs
Tender Fee 500
EMD 6000
Exemption Not Available
Document List
BOQ_1077745.xls
ce82970f-d912-4af1-baf5-a077a171def9.html
Tendernotice_1 (11).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Sep 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1077745.xls

html

ce82970f-d912-4af1-baf5-a077a171def9.html

pdf

Tendernotice_1 (11).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders