Tender For Additional Alteration Of Hppsc Office Building At Nigam Vihar, Shimla-02 (Sh:- Construction Of Waiting Area Near Canteen Of Hppsc Building, Nigam Vihar, Shimla-02)
Tender Value
50.16 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
7 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Alteration Of Hppsc Office Building At Nigam Vihar, Shimla-02 (Sh:- Construction Of Waiting Area Near Canteen Of Hppsc Building, Nigam Vihar, Shimla-02)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres Nominal size concrete 1:4:8 or leaner mix (i/c equivalent design mix)complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 50 m |
| 5 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 6 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts,nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of materials within all leads and lifts. |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 9 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2;4 (1 Cement :2coarse sand) : 4graded stone aggregate 20 mm nominal size) |
| 10 | providing and fixing 7.5cm thick aerated autoclave cooncrete dry wall of superior quality and make including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 11 | providing and fixing 12mm thick fibre cement board of Everest or its equivalent of approved shade and sample of superior quality and make for external finishing including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 13 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete 1200X 600 MM |
| 14 | Kota stone slab flooring 22mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 15 | Precast plain chequered tiles hydraulic compressed 22 mm thick NTC or equivalent Make laid in open ground,floors, treads of steps and landings etc. on a bed of 25 mm average thickness of cement mortar 1:4 (1 cement :4 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) complete with tiles of medium shades.including carriage of materials within all leads and lifts. |
| 16 | Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position. Of 2nd class deodar wood complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)(i) Second class Deodar wood (a) 40 mm thick shutters |
| 18 | Providing and fixing holdfast of superior quality of size 40 x 3 mm size complete including carriage of materials in all leads and lifts as per direction of Enginner-in-charge. |
| 19 | Providing built up UPVC casernment windows profile specifications:- Zendoe series: Outer transe-12801 (70mmx5mm), Siasa-12617 (70 mmx70 mm) Z Mullion-3000 (70 mm x 50 mm), Cesspling-12368 (70mm) Including shutters with chember thickness 2.60 mm and Cil frame thickness 1.20 to 2.00 mm and 6 mm + 12 mm +6 mm DGU toughned glass gap filled with argon gas fored with thermoplastic elastomer (TPE) gasket, Wire mesh panels. grils-George bars etc. complete Including Zinc alloy casement handle, Friction Stay/2D hinges butt hinges, espag multipoint locling system, locking strickers complete in all leads and lifts including carriage of materials and as per the direction of the Engineer-in-Charge |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge :150x10 mm |
| 21 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge : (i)100mm |
| 22 | Providing and fixing sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge. : (i)250x16mm |
| 23 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of requireddia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 24 | Providing and fixing ACP sheet 4mm thick in panelled and glazed door shutter and partition fixed with self drilling screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 25 | Providing and fixing Tata Durashine 0.63 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 26 | Providing and fixing 2MM MS BP sheet of standard quality ISI mark and approved shade inceiling & wall panelling i/c mitring atjunctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 27 | Providing and Fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 28 | Providing and fixing 30cm wide, 60m overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/m² including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 29 | Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand).Flashing including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 30 | Providing and fixing of office visitor chair medium back with pu cushion seat and back with pu arms and superior quality fabric heavy quality powder coated fram godrej type compelete. (rate taken vide aggremnt no 1067 of 24-25awarded to M/S Naresh Kumar) including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 31 | Supplying and fixing instalaltions at site Three seater sofa sets made of teak wood for lounge set of required seats having 150mm thickness and cushoning with cushion 32D foam of required thickness matching to bed of approved shade including groves at approved location final finished with PU coating on [polish of approved shade Cat No AES-320rate taken vide aggremnt no 1067 of 24-25awarded to M/S Naresh Kumar) including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 32 | PROVIDING AND FIXING OF WOODEN CONFRANCE TABLE WITH ELECTRICAL POP UP BOX FITTING 4 NO WITH ALL ELECTRICAL ACCESSORIES IN SUPERIOR QUALITY LAMINATED BORAD BOTH SIDE LAMINATED IN ACTION TESA MAKE ALL EDGE IS COVERED WITH SUPERIOR QUILTY EDGE BINDING TAPE OF 35 MM THICK OF SIZE 2745*1375*760 MM rate taken vide aggremnt no 1067 of 24-25awarded to M/S Naresh Kumar) complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 33 | Supplying ,fixing and instalaltions at site dining Chair made of teak wood for dining area and back with 32D foam of required thickness matching to dining table of approved shade including groves at approved location final finished with PU coating on [polish of approved shade Cat No AED-992A(rate taken vide aggremnt no 1067 of 24-25awarded to M/S Naresh Kumar)) complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 34 | Providing and fixing at site blinds full size of superior quality zabra complete with all accesoriees as required as per the direction of Engineer-in-charge. (rate taken vide aggremnt no 781 of 24-25 awarded to M/S Naresh Kumar) |
| 35 | Providing and fixing at site curtains full size length D.D home décor make with stitching & Presses 8 No eye & 30cm fold including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge SIZE 2.10 T0 2.40m |
| 36 | Providing and fixing ESS ESS made funnels for curtain rods of superior quality and make including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 37 | Providing and fixing Ess-ESS curtain rod 25mm dia with clamps,wall brackets with screws etc.complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 38 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. |
| 39 | Finishing walls with Acrylic Smooth exterior paint of required shade complete including carriage of materials within all leads and lifts:- Old work (two or more coat ) including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge. new work |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 41 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 42 | Painting steel work with Deluxe Multi Surface Paint of required shade new work two or more coat of approved brand and manufacture complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 43 | Painting wood work with Deluxe Multi Surface Paint of required shade new work two or more coat of approved brand and manufacture complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender